Electron‐Transfer Mediator Microbiosensor Fabrication Based on Immobilizing HRP‐Labeled Au Colloids on Gold Electrode Surface by 11‐Mercaptoundecanoic Acid Monolayer

In this paper, a new strategy for constructing a mediator‐type amperometric hydrogen peroxide (H₂O₂) microbiosensor was described. An electropolymerized thionine film (PTH) was deposited directly onto a gold electrode surface. The resulting redox film was extremely thin, adhered well onto a substrate (electrode), and had a highly cross‐linked network structure. Consequently, horseradish peroxidase (HRP) was successfully immobilized on nanometer‐sized Au colloids, which were supported by thiol‐tailed groups of 11‐mercaptoundecanoic acid (11‐MUA) monolayer covalently bound onto PTH film. With the aid of the PTH mediator, HRP‐labeled Au colloids microbiosensor displayed excellent electrocatalytical response to the reduction of H₂O₂. This matrix showed a biocompatible microenvironment for retaining the native activity of the covalent HRP and a very low mass transport barrier to the substrate, which provided a fast amperometric response to H₂O₂. The proposed H₂O₂ microbiosensor exhibited linear range of 3.5 μM–0.7 mM with a detection limit of 0.05 μM (S/N=3). The response showed a Michaelis‐Menten behavior at larger H₂O₂ concentrations. The K_M^app value for the biosensors based on 24 nm Au colloids was found to be 47 μM, which demonstrated that HRP immobilized on Au colloids exhibited a high affinity to H₂O₂ with no loss of enzymatic activity. This microbiosensor possessed good analytical performance and storage stability.     

An ab initio potential energy surface for the υ4 vibrational mode of hydrogen peroxide

In this paper, the levels and the torsional microstates of hydrogen peroxide are determined from fully optimized ab initio calculations using a nuclear model in one dimension. Calculations have been performed at the MP2 level with the 6-311 G(2df,2pd), 6-31 1+G(2df,2pd), cc-pVTZ and AUG-cc-pVTZ basis sets including polarization orbitals and diffuse functions. The most stable conformation, calculated with the MP2/AUG-cc-pVTZ approach, is a trans–gauche conformer lying at 67.5° from the trans structure. By using the same level of calculations, the heights of the trans and cis barriers have been determined to be 386.5 and 2643.8 cm⁻¹ in a good agreement with the experimental data. The variational torsional levels split into four components by the tunnelling effect of the barriers. The splitting of the fundamental level caused by the trans barrier has been found to be 11.8683 cm⁻¹, whereas the splitting caused by the cis barrier is insignificant under n=2. Current ab initio energies confirm the experimental assignments and verify the separability of the torsion from the rest of the vibrations. However, the experimental relation of dependence on the torsion of the rotational constants cannot be reproduced in one-dimension and depends on several additional vibrational effects.     

Room temperature deposition of nanocrystalline cadmium peroxide thin film by electrochemical route

Nanocrystalline cadmium peroxide thin film has been electrodeposited on indium doped tin oxide glass substrate from aqueous solution at room temperature. The grain size of the nanocrystals of the film is estimated from XRD and is about 14 nm. The deposits are decomposed at 228 °C by formation of CdO, releasing plentiful heat at same time. The band-gap of the nanocrystalline CdO film made from decomposition of electrodeposited CdO₂ is around 2.4 eV.     

A Novel Enhancing Flow-Injection Chemiluminescence Method for the Determination of Glutathione Using the Reaction of Luminol with Hydrogen Peroxide

 A rapid flow-injection method with chemiluminescence (CL) detection is described for the determination of glutathione (GSH). The method is based on the CL reaction of luminol and hydrogen peroxide. GSH can greatly enhance the chemiluminescence intensity in 0.1 mol/L borax–sodium hydroxide buffer solution (pH = 9.7). The maximum CL intensity was directly proportional to the concentration of GSH in the range 3.0 × 10⁻⁷–2.0 × 10⁻⁵ mol/L, and the detection limit was 6.8 × 10⁻⁸ mol/L. The relative standard deviation was 3.4% for 5.0 × 10⁻⁶ mol/L of GSH (n = 11). Received October 23, 2001; accepted June 18, 2002     

Catalytic oxidation of alcohols to carbonyl compounds with hydrogen peroxide using dinuclear iron complexes

Oxidation of primary and secondary alcohols has been studied in the presence of [Fe(ind)Cl]₂O (1) and [Fe₂(OMe)₂(PAP)Cl₄] (2) (indH = 1,3-bis(2′-pyridylimino)isoindoline; PAP = 1,4-di(2′-pyridyl)aminophthalazine) as catalysts using hydrogen peroxide as primary oxidant. The complexes were found to be suitable catalysts for the oxidation of alcohols to the corresponding carbonyl compounds in acetone as solvent. The reactivity of the alcohols is in the order primary < secondary < cyclic secondary < aromatic. The reaction mechanism in the case of 1 probable involves an iron-based oxidant, while in the case of 2 a free-radical mechanism is suggested.     

Study of amorphous Ni-La-B/g-Al2O3 catalysts for the production of hydrogen peroxide from carbon monoxide, water and oxygen

Summary Novel amorphous Ni-La-B/-Al₂O₃ catalysts have been developed for the production of hydrogen peroxide from carbon monoxide, water and oxygen. The experimental investigation confirmed that the catalyst dried at 120ºC in air shows the best initial activity. The deactivation of amorphous Ni-La-B/-Al₂O₃ catalysts was also studied.     

超导体Y-Ba-Cu-O复合氧化物催化苯酚羟化反应的研究

利用HZOZ和苹酚联产对苯二醋和邻苯二酚是目前二酚生产领域中比较活跃的课题．长久以来，人们曾利用酸、金属盐、金属配合物等作为催化剂，在均相体系中来研究其对苯酸羟化反应的催化活性．由平均相反应存在着明显的缺点，后来又转向了多相催化剂的开发，先后出现了TSull］TS42     

Chemoselective mono halogenation of β-keto-sulfones using potassium halide and hydrogen peroxide; synthesis of halomethyl sulfones and dihalomethyl sulfones

The synthesis of α-halo β-keto-sulfones using potassium halide and hydrogen peroxide as a chemoselective mono halogenation reagent and the synthesis of α,α-symmetrical and asymmetrical dihalo β-keto-sulfones and α-halo, α-alkyl and β-keto-sulfones is described. Base induced cleavage of α-halo β-keto-sulfones, α,α-dihalo β-keto-sulfones, and α-halo, α-alkyl β-keto-sulfones afforded the corresponding halomethyl sulfones, dihalomethyl sulfones and haloalkyl sulfones.     

Mn(III)-catalyzed oxidation of sulfides to sulfoxides with hydrogen peroxide

Sulfides were selectively oxidized to the corresponding sulfoxides in good yields with hydrogen peroxide using a manganese(III) Schiff-base complex as a catalyst in glacial acetic acid as solvent under mild conditions.     

Analysis of the effects of catalytic bleaching on cotton

Hydrogen peroxide can be catalyzed to bleach cotton fibers at temperatures as low as 30°C by incorporating dinuclear tri-μ-oxo bridged manganese(IV) complex of the ligand 1,4,7-trimethyl-1,4,7-triazacyclononane (MnTACN) as the catalyst in the bleaching solution. The catalytic system was found to be more selective under the conditions applied than the non-catalytic H₂O₂ system, showing better bleaching performance while causing slightly lower decrease in degree of polymerization (DP) of cellulose. In order to gain fundamental knowledge of the bleach effect on cotton fibers and cellulose as its main component, especially after catalytic bleaching, X-ray Photoelectron Spectroscopy (XPS) was used to study surface chemical effects. The Washburn method was applied to investigate wetting properties, and liquid porosity was used to obtain pore volume distribution (PVD) plots. Parallel analyzes performed on model cotton fabric, i.e. “clean” cotton fabric stained with morin - a pigment regularly found in native cotton fiber, helped to differentiate between pigment oxidation and other bleaching effects produced on the (regular) industrially scoured cotton fabric. Bleaching was not limited to the chemical action but also affected cotton fiber capillary parameters most likely due to the removal of non-cellulosic materials as well as chain-shortened cellulose.