复叠系统低温级制冷剂的循环性能对比实验

通过实验测试,比较了不同冷凝温度和蒸发温度下复叠系统低温级常用制冷工质R13、R23、R503和RS08B的COP、压比及制冷量等循环性能,又结合各制冷工质的环境性能、热工性能,分析了现有常用复叠系统低温级制冷工质各自的优缺点,为新工质的开发及进一步的制冷性能对比实验工作提供了有益的帮助.     

The Cradle-to-Cradle Life Cycle Assessment of Polyethylene terephthalate: Environmental Perspective

Over the last several years, the number of concepts and technologies enabling the production of environmentally friendly products (including materials, consumables, and services) has expanded. One of these ways is cradle-to-cradle (C2C) certified^TM. Life cycle assessment (LCA) technique is used to highlight the advantages of C2C and recycling as a method for reducing plastic pollution and fossil depletion by indicating the research limitations and gaps from an environmental perspective. Also, it estimates the resources requirements and focuses on sound products and processes. The C2C life cycle measurements for petroleum-based poly (ethylene terephthalate) (PET) bottles, with an emphasis on different end-of-life options for recycling, were taken for mainland China, in brief. It is considered that the product is manufactured through the extraction of crude oil into ethylene glycol and terephthalic acid. The CML analysis method was used in the LCIA for the selected midpoint impact categories. LCA of the product has shown a drastic aftermath in terms of environmental impacts and energy use. But the estimation of these consequences is always dependent on the system and boundary conditions that were evaluated throughout the study. The impacts that burden the environment are with the extraction of raw material, resin, and final product production. Minor influences occurred due to the waste recycling process. This suggests that waste degradation is the key process to reduce the environmental impacts of the production systems. Lowering a product’s environmental impact can be accomplished in a number of ways, including reducing the amount of materials used or choosing materials with a minimal environmental impact during manufacture processes.     

Z箍缩驱动聚变-裂变混合堆氚燃料循环系统氚盘存量与氚自持初步分析

为研究氚自持条件,建立了Z-FFR氚分析模型,基于理论方程和氚平均滞留时间方法进行计算,得到稳态运行时排灰气处理系统、氚增殖提取系统、同位素分离系统、水去氚化系统的氚质量流分别为52.30,25.40,81.30,3.60 g/day,对应的氚盘存量为52.30,25.40,8.13,1.80 g。同时以氚质量流推导出氚自持判断条件,分析了设计参数能够满足氚自持要求,同时获得了燃烧效率、氚增殖率、提取效率与氚自持的互补关系,三者作为关键参数相互依存,于临界值、设计值、理想值之间分析了氚的自持情况。     

Long cycles and spanning subgraphs of locally maximal 1-planar graphs

A graph is 1-planar if it has a drawing in the plane such that each edge is crossed at most once by another edge. Moreover, if this drawing has the additional property that for each crossing of two edges the end vertices of these edges induce a complete subgraph, then the graph is locally maximal 1-planar. For a 3-connected locally maximal 1-planar graph G, we show the existence of a spanning 3-connected planar subgraph and prove that G is Hamiltonian if G has at most three 3-vertex-cuts, and that G is traceable if G has at most four 3-vertex-cuts. Moreover, infinitely many nontraceable 5-connected 1-planar graphs are presented.     

耦合时间精度对模拟飞行器自由运动特性的影响

将亚迭代技术引入流体动力学和刚体动力学方程的耦合求解,获得细长三角翼极限环运动的规律.探讨耦合时间精度对飞行器非定常运动特性的影响,细长三角冀的大迎角自由滚运动最终形成极限环振荡的周期性自维持运动,不同攻角自由滚振幅阶跃式的变化特点较好地吻合了自由滚试验的规律.对于多系统耦合问题,亚迭代耦合求解(耦合时间精度为二阶)对物理时间步长的依赖性不明显;而存在一阶时间滞后的解耦推进方法的数值结果强烈地依赖于物理时间步长选取,稍大的时间步长将导致非物理的数值结果.     

基于甲醇化学链燃烧的新型燃气轮机间冷循环

本文提出一种新颖的甲醇化学链燃烧动力循环系统.该系统利用空气压缩的间冷热提供甲醇和Fe2O3反应热,将间冷的低温热转换为高品位化学能;同时得到预冷的空气吸收燃烧产物Fe2O3的显热,降低了还原反应的温度.与常规化学链循环相比,该循环利用间冷的热量代替高温Fe2O3的显热提供还原反应的反应热,系统内能量品位匹配更加合理.根据图像(火用)分析方法,阐明了甲醇化学链燃烧过程(火用)损失减少和间冷热品位提升的机理.本文对新循环进行了分析,并以常规化学链循环为参照,研究了其性能.新循环的效率较高,同时可以实现CO2无能耗的分离.     

Langford系统Hopf分叉的线性反馈控制

分析Langford系统的Hopf分叉现象，并研究采用线性反馈控制方法控制该系统的Hopf分叉.从理论上推导出受控系统产生Hopf分叉的条件，给出了某些极限环的解析表达式，对该系统进行了分叉点的转移与极限环的稳定性控制.数值模拟说明本文采用的方法对Langford系统的Hopf分叉控制是有效的. 关键词： Langford系统 反馈控制 Hopf分叉 极限环     

Limit Cycles Bifurcating from a k-dimensional Isochronous Center Contained in ?n with k ? n

The goal of this paper is double. First, we illustrate a method for studying the bifurcation of limit cycles from the continuum periodic orbits of a k-dimensional isochronous center contained in ℝ ⁿ with n ⩾ k, when we perturb it in a class of differential systems. The method is based in the averaging theory. Second, we consider a particular polynomial differential system in the plane having a center and a non-rational first integral. Then we study the bifurcation of limit cycles from the periodic orbits of this center when we perturb it in the class of all polynomial differential systems of a given degree. As far as we know this is one of the first examples that this study can be made for a polynomial differential system having a center and a non-rational first integral. The first and third authors are partially supported by a MCYT/FEDER grant MTM2005-06098-C01, and by a CIRIT grant number 2005SGR-00550. The second author is partially supported by a FAPESP–BRAZIL grant 10246-2. The first two authors are also supported by the joint project CAPES–MECD grant HBP2003-0017.     

环境温度对燃气轮机功热并供装置及联合循环变工况性能的影响

采用动力机械变工况性能解析分析方法,研究了大气温度变化对燃气轮机功热并供和联合循环装置性能影响．指出燃气轮机在带有余热利用的条件下,大气温度的影响明显减弱,并对不同燃气轮机设计参数和蒸汽设计参数影响做了分析比较。