The HPLC Enantioresolution of Phenyl Isothiocyanated Amino Acids on Vancomycin Bonded Phase Using the Acetonitrile‐Based Mobile Phase: A Comparison to the Teicoplanin Phase

The phenyl isothiocyanate, an electrophilic reagent for peptide chain sequencing, is used to pre‐column derivatize a variety of α‐amino acids in alkaline medium before their enantioresolution on a vancomycin bonded chiral phase using the acetonitrile‐based mobile phase. The observed resolution is believed to be due to the re‐location of the hydrogen receptor site from sulfur to nitrogen on the isothiocyanyl fragment of derivatizing reagent, which in turn changes the enantioselectivity. Under the same chromatographic conditions, the resolution for N‐benzoylated, 3,5‐dinitrobenzoylated and N‐carbobenzyloxylated amino acids is either not found or unsatisfactory. Also, no resolution is obtained in the reversed‐ or normal phase mode for all phenyl isothiocyanated amino acids examined in this study.     

Ascorbic Acid Oxidation at Nonmodified and Copper‐Modified Polyaniline and Poly‐ortho‐methoxyaniline Coated Electrodes

The electrochemical oxidation of ascorbate ions is comparatively studied at polyaniline (PANI) and poly‐ortho‐methoxyaniline (POMA) layers in absence and presence of electrodeposited copper species. In comparison to PANI, POMA layers allow decreasing the overpotential necessary for driving the ascorbate oxidation reaction. A nonlinear dependence of the ascorbate oxidation current on the polymer layer redox charge is found. Copper electrodeposited in PANI and POMA layers is electrocatalytically active for the investigated reaction. Two separate oxidation waves are observed in the case of Cu‐PANI whereas a single ascorbate oxidation wave and enhanced currents are found in the Cu‐POMA case.     

Disproportionation of 6,8-Dialkyl-3-thia-2,4,6,8-tetraazabicyclo[3,3,0]octan-7-one 3,3-Dioxides under Conditions of Acid Hydrolysis and Acetylation

Acid hydrolysis and acetylation of 6,8-dialkyl-3-thia-2,4,6,8-tetraazabicyclo[3,3,0]octan-7-one 3,3-dioxides have been studied. 6,8-Dialkyl-3-thia-2,4,6,8-tetraazabicyclo[3,3,0]octan-7-one 3,3-dioxides disproportionate to 4,4'-sulfonyldiiminobis(1,3-dialkylimidazolidin-2-ones) and sulfamide when treated with acid at pH 1 or with acetyl chloride. The kinetics of the disproportionation have been studied.     

Carob pod: A new substrate for citric acid production by Aspergillus niger

The production of citric acid from carob pod extract byA. niger in surface fermentation was investigated. A maximum citric acid concentration (85.5 g/L), citric acid productivity (4.07 g/L/d), specific citric acid production rate (0.18 g/g/d), and specific sugar uptake rate (0.358 g/g/d) was achieved at an initial sugar concentration of 200 g/L, pH of 6.5, and a temperature of 30°C. Other kinetic parameters, namely, citric acid yield, biomass yield, specific biomass production rate, and fermentation efficiency were maximum at pH 6.5, temperature 30°C, and initial sugar concentration 100 g/L. The external addition of methanol into the carob pod extract at a concentration up to 4% (v/v) improved the production of citric acid.     

On the synthesis and chiroptical properties of the tri- and tetragalloylquinic acids

Summary A synthesis of the potential pharmaceutical agents 3,4,5-trigalloylquinic acid and 1,3,4,5-tetragalloylquinic acid is described. It involves three steps starting from commercially available quinic acid and provides overall yields of about 15%. The acylation of benzyl or 4-nitrobenzyl quinate with tribenzylgalloyl chloride is the key step. It leads selectively to the triacyl product in the case of benzyl quinate and can be either stopped at the triacyl stage or driven to the tetraacyl derivative in the case of the 4-nitrobenzyl quinate. From the chiroptical properties of the two compounds their stereochemistry was derived by means of the benzoate rule.

---

Zu Synthese und chiroptischen Eigenschaften der Tri- und Tetragalloylchinasäuren

Zusammenfassung Eine Synthese von 3,4,5-Trigalloylchinasäure und 1,3,4,5-Tetragalloylchinasäure. die potentielle Pharmaka darstellen, wird beschrieben. Sie umfaßt drei Stufen, welche ausgehend von kommerziell erhältlicher Chinasäure Gesamtausbeuten um 15% ergeben. Die entscheidende Stufe dabei ist die Acylierung von Benzyl- oder 4-Nitrobenzylchinat mit Tribenzylgalloylchlorid. Sie führt im Falle des Benzylchinats selektiv zum Triacylprodukt und kann im Fall des 4-Nitrobenzylchinats entweder auf der Stufe des Triacylderivates abgebrochen oder bis zum Tetraacylprodukt durchgezogen werden. Aus den chiroptischen Eigenschaften der beiden Verbindungen wurde ihre Stereochemie abgeleitet.

     

N- and O-Alkylation of 3-indolylcyclopropylacetic acid derivatives

2,2-Dimethyl-3-(2-methyl-3-indolyl)cyclopropylacetic acid, its amide and esters, and the corresponding alcohol, viz., the product of ester reduction by LiAlH₄, were synthesized. The chemoselectivity of N- and O-alkylation of these compounds was studied. Selective monoalkylation at the nitrogen atom of the heterocycle, O-alkylation to the side chain, or dialkylation at both nucleophilic sites can be carried out under conditions of phase-transfer catalysis. The N-acylation at the indole fragment of nitrile of this acid occurs only under the Vilsmeier—Haak formylation conditions.     

The sulfinyl moiety as an internal nucleophile. Part 8: Efficient, stereospecific synthesis of (+)-polyoxamic acid

A straightforward and stereospecific synthesis of (+)-polyoxamic acid is disclosed. The key step of the synthesis involves the regio- and stereospecific bromohydration of an olefin via intramolecular participation by the sulfinyl group.     

On-line Separation and Detection of Peptides by Capillary Electrophoresis / Electrospray FT-ICR-MS

Recently, capillary electrophoresis/electrospray ionization mass spectrometry (CE/ESI- MS) has been rapidly developed as a powerful analytical tool for charged species ranged from small molecules such as carboxylic acids1, phenolic compounds2, metal species3, tetramines4, herbicides5, drugs and drug metabolites6 to peptides and proteins7, 8. The ESI mode has proven to be sensitive, versatile and relatively easy to use in combination with CE. CE confers rapid analysis and efficient separ…     

Novel polymer blends based on poly(ether-urethane) ionomer and ion-containing styrene copolymer

The structure-property relationships of thermoplastic polymer blends based on poly(ether-urethane) ionomer (PEUI) and ion-containing styrene-acrylic acid copolymer (S-co-AA(K)) have been investigated by using DMTA, DSC and TGA, as well as tensile tests. Convergence of the glass transition temperature (T_g) values of the PEUI and the S-co-AA(K) components in the blends studied, as compared to the individual polymers, was found and explained by improving compatibility of the components due to increasing effective density of physical networks formed by ion-dipole and ion-ion interactions of ionic groups of the components. Character of E'=f(T) and E'=f(T) dependencies confirms the increase of the effective density of physical networks in the compositions studied compared to individual PEUI and S-co-AA(K). Improvement of end-use properties, i.e. thermal stability and tensile properties has been found for the PEUI/S-co-AA(K) compositions with lower content of S-co-AA(K) (i.e. <10 mass%) and explained by formation of additional network of intermolecular ionic bonds between the functional groups of PEUI and S-co-AA(K).     

Solid-state polyamidation of hexamethylenediammonium adipate. II. The influence of acid catalysts

Loss of diamine and distinct transition phenomena from the solid to the melt state restrain solid-state polymerization (SSP) of nylon salts from industrial application. To depress these phenomena temperatures well below the melting point of the starting material are employed, resulting however in low reaction rates. The need to use catalysts arises and accordingly in this study hexamethylenediammonium adipate (HMA) particles were polymerized containing a strictly controlled amount of uniformly distributed catalyst. The catalysts included boric, sulphuric, and phosphoric acids with boric acid being the most effective in accelerating the reaction while eliminating the tendency to agglomeration. In general, catalyst concentration up to a critical value plays a considerable role in the overall behavior. Furthermore, in agreement with non catalytic processes, the reaction temperature remains an influential parameter. © 1994 John Wiley & Sons, Inc.