Preparation of Fucoxanthin Nanoemulsion Stabilized by Natural Emulsifiers: Fucoidan,Sodium Caseinate,and Gum Arabic

This study was proposed to investigate the possibility of O/W nanoemulsion stabilization via natural emulsifiers as a delivery system for fucoxanthin. Nanoemulsions were prepared using ultrasonic treatment (150 W, amplitude 80%, 10 min) with different levels (0.5%, 1%, and 2% wt) of fucoidan, gum Arabic, and sodium caseinate as natural emulsifires and they were compared with tween 80. Then, the creaming index, stability, encapsulation efficacy, Fourier-transform infrared (FT-IR) spectroscopy, and in vitro release were evaluated. The best stability and lowest creaming index were observed at 2% wt of emulsifiers. Nanoemulsions with droplet sizes (113.27–127.50 nm) and zeta potentials (−32.27 to −58.87 mV) were prepared. The droplet size of nanoemulsions was reduced by increasing the emulsifier concentration, and the best nanoemulsion stability after 15 days of storage was in the following order: tween 80 > sodium caseinate > fucoidan > gum Arabic. The encapsulation efficacy of nanoemulsions stabilized by sodium caseinate, fucoidan, and gum Arabic were 88.51 ± 0.11%, 79.32 ± 0.09%, and 60.34 ± 0.13%, respectively. The in vitro gastrointestinal fucoxanthin release of nanoemulsion stabilized with tween 80, sodium caseinate, fucoidan, and gum Arabic were 85.14 ± 0.16%, 76.91 ± 0.34%, 71.41 ± 0.14%, and 68.98 ± 0.36%, respectively. The release of fucoxanthin from nanoemulsions followed Fickian diffusion. The FTIR also confirmed the encapsulation of fucoxanthin.     

Lattice Boltzmann simulation of particles agglomeration and rheology in a particulate flow

The dynamics and rheology of particles in a Newtonian fluid subjected to shear are simulated using Lattice Boltzmann Method. A computationally-efficient Smoothed Profile Method is used to resolve fluid-solid interactions, and the Lennard-Jones inter-particle potential is implemented to account for inter-particle forces. The use of a bi-periodic computational domain with Lees-Edward boundary conditions allows simulation for systems consisting of a large number of particles under shear. The method is validated for single and dual particle problems and an analysis is performed for multi-particle problems under a range of shear rates and particle fractions. The introduction of particle-particle interactions, which are physically important in many engineering processes, is found to have a considerable impact on the dynamics, agglomeration and rheology. The total stress exhibits high unsteadiness primarily due to the solid component contribution, at higher particle fractions. The simulations underscore the complex interplay between shear, interparticle forces and agglomeration and the complex dependencies of the rheological properties.     

Trace metals (Cu, Pb, Zn, Cd, Al, Li, Fe, Mn, Ni, Co) in marine suspended particulate matter: an international ICES intercomparison exercise

 The aim of this intercomparison exercise was to assess the comparability of trace metal analyses of blank filters and of marine suspended particulate matter (SPM) on filters performed by laboratories in ICES member countries. Fifteen experts from the United Kingdom, Canada, France, Germany, the Netherlands, Norway, Poland, Russia, and the United States were invited to participate in this exercise for trace metal analyses of Cu, Pb, Zn, Cd, Al, Li, Fe, Mn, Ni and Co (tentative) in SPM. Each filter analysed in this project was an individual sample, the absolute loadings on the filters varying from 0.8 to 2 mg of SPM. The inter-laboratory means and the relative standard deviations (RSD) from the grand mean for the metals determined were: Al 67.5 mg/g, 8.3%, Fe 51.7 mg/g, 10.9%, Cd 1.5 μg/g, 22.7%, Cu 39 μg/g, 13.3%, Pb 38 μg/g, 34.7%, Mn 1060 μg/g, 13%, Ni 49.2 μg/g, 29%, Zn 182 μg/g, 32.5%, Li 52.8 μg/g, 26.1%, Co 15.4 μg/g, 23.6%. In general, the exercise demonstrated that it is possible for the various participants to collect very small amounts of SPM and analyse it by the different determination techniques. Compared to earlier exercises, comparability between laboratories was still difficult to achieve and limited. Received: 27 June 1996 Accepted: 15 August 1996     

Metal fractionation of atmospheric aerosols via sequential chemical extraction: a review

This review surveys schemes used to sequentially chemically fractionate metals and metalloids present in airborne particulate matter. It focuses mainly on sequential chemical fractionation schemes published over the last 15 years. These schemes have been classified into five main categories: (1) based on Tessiers procedure, (2) based on Chesters procedure, (3) based on Zatkas procedure, (4) based on BCR procedure, and (5) other procedures. The operational characteristics as well as the state of the art in metal fractionation of airborne particulate matter, fly ashes and workroom aerosols, in terms of applications, optimizations and innovations, are also described. Many references to other works in this area are provided.     

固相微萃取气质联用技术对卷烟烟丝和卷烟烟气总粒相物中挥发性和半挥发性成分的研究

采用固相微萃取－气相色谱－质谱（SPME－GC－MS）法对成品卷烟烟丝和卷烟烟气总粒相物中挥发性和半挥发性成分进行了分析鉴定，并对鉴定出的70种成分和96种成分进行了比较。     

复合聚并协同脱除燃煤颗粒物及颗粒态重金属的中试研究

燃煤颗粒物和其上富集的As、Se、Pb等重金属排入大气后危害环境和人体健康。本研究开发以湍流聚并、壁面回流吸附为原理的复合聚并器，研究了聚并前后对颗粒物和颗粒态重金属的聚并效果。首先采用数值模拟方法综合考虑压力损失、速度均匀性和颗粒物聚并效果，优选了折叶片作为复合聚并器的叶片类型。随后进行了不同流量的颗粒物聚并中试研究，发现复合聚并器对PM₁的聚并率可达32.84%，随着流量从11.1 m/s增加到17.6 m/s，PM_2.5聚并率呈现一定下降趋势，说明了流量增加导致颗粒停留时间缩短和颗粒物聚并率的下降。通过对比聚并前后颗粒物中As、Se、Pb的浓度变化，发现聚并过程增强了对气态重金属的吸附，也会聚集富含重金属的纳米级颗粒物，从而造成PM₁中重金属浓度的增加。聚并后PM₁内的As、Se、Pb绝对浓度的降低，显示了复合聚并器对颗粒物和颗粒态重金属的协同脱除效果。     

Physico-chemical characterization of crystalline phases in fly ashes

Fuel oil combustion in power plants, domestic heating systems and diesel engines, causes the emission in the environment of particles with a typical structure and composition: the cenospheres.These particles are produced during the microdrop fuel oil combustion, when air and fuel are injected into the combustion chamber; they have a spheroidal morphology and a spongy structure.Cenospheres are constituted by an amorphous component rich in C, S, Si, Fe and Al; phases composed by microcrystals of sulphates, oxides and pure metallic elements or their alloys, are frequently present in the cenospheres.These crystalline phases are important from environmental and toxicological points of view both because they are composed of heavy metals, and because they can play an important role in heterogeneous catalysis.We started to study these crystalline phases by analytical electron microscopy techniques and electron energy loss spectrometry to define and characterise their structure and composition.     

Urinary levoglucosan as a biomarker for residential wood smoke exposure

As part of a randomised controlled residential intervention study, levoglucosan (LG) was investigated as a biomarker for wood smoke exposure. This study was conducted among 33 children living in homes that used wood stoves for residential heating. Indoor fine particulate matter (PM_2.5) concentrations and corresponding urine samples from participants were collected during pre- and a post-intervention winter sampling periods. Interventions included the installation of an air filtration unit and a wood stove change out. Homes and children assigned to a placebo filter served as the control condition. Results showed a strong reduction in indoor PM_2.5 among the air filter homes (≈58% reduction), whereas the wood stove change out homes did not have a significant PM_2.5 reduction from pre- to post-intervention observations. Children living in the air filter homes did not show a corresponding reduction in urinary LG concentrations. Further analysis did not show an association between overall changes in indoor PM_2.5 concentrations and changes in urinary LG concentrations. These findings suggest that urinary LG is not a reliable indicator of wood smoke exposure in residential wood heating settings.     

Characterization of nanometric carbon materials by time-resolved fluorescence polarization anisotropy

In this work, time-resolved fluorescence polarization anisotropy (TRFPA) technique has been applied to the determination of the average size of asphaltenes and combustion-generated carbon nanoparticles. The characteristic depolarization time of fluorescence light following photon absorption is related to the typical particle size through the Stoke–Einstein rotational diffusion equation. The TRFPA technique employed in our experiment achieves sub-nanosecond time resolution, roughly corresponding to sub-nanometer accuracy in determining the particle size. The technique has been applied to both asphaltene and carbon nanoparticles, the former being a component of petroleum, whereas the latter result from combustion processes. Therefore, a complete and reliable characterization of such particles is of great importance in oil industry and atmospheric physics, respectively. Although the TRFPA technique has been developed and widely used on molecular and biological samples, it proves to be a very powerful tool for measuring the size of asphaltene and soot particles as small as few nanometers with a resolution of the order of 0.1 nm.