加压溶剂萃取法萃取大气颗粒物中的烷烃

建立了一种小体积中压中温(332μL,2-8MPa,100-200℃)液体萃取大气颗粒物中烷烃的方法。研究了萃取时间、温度、压强及溶剂量对萃取效率的影响。检出限为2-12ng／m^3,重复性的相对标准偏差在0．8％-10．5％之间。     

On the mechanical behaviours of a craze in particulate–polymer composites

In polymeric composites, well-defined inclusions are incorporated into the polymer matrix to alleviate the brittleness of polymers. When a craze is initiated in such a composite, the interaction between the craze and the surrounding inclusions will greatly affect the composite’s mechanical behaviours and toughness. To the best knowledge of the authors, only little research work has been found so far on the interaction between a craze and the near-by inclusions in particulate–polymer composites. In the current study, the first time, the influences of the surrounding inclusions on the craze are investigated in particulate–polymer composites. The three-phase model is adopted to study the fracture behaviours of the craze affected by multiple inclusions. An iterative procedure is proposed to solve the stress intensity factors. Parametric studies are performed to investigate the influences of the reinforcing particle volume fraction and the shear modulus ratio on fracture behaviours of particulate–polymer composites.     

应用多元线性回归法测定黄河口不同粒径悬浮物中的有机碳含量

悬浮颗粒物(TSS)粒径与颗粒有机碳(POC)含量的关系研究,是河口淡、咸水混合过程中有机碳形态变化及其输送过程和输运通量研究的基础。在沉降法分级的基础上,结合激光粒度仪粒度测定,用多元线性回归分析法处理所得数据,校正了由于沉降分级的粒径交错现象而导致POC测定中小粒径TSS的POC含量偏低、大粒径TSS的POC含量偏高的问题,获得了样品中不同粒径TSS的POC含量。实验发现,黄河口水体中POC含量随TSS粒径的增加显著递减,80%以上的颗粒有机碳集中在<16μm的TSS中,而粒径<32μm的悬浮物承载了95%以上的颗粒有机碳的入海量。     

Effect of Aucubin-Containing Eye Drops on Tear Hyposecretion and Lacrimal Gland Damage Induced by Urban Particulate Matter in Rats

Exposure to particulate matter is a causative factor of dry eye disease. We aimed to investigate the beneficial effect of eye drops containing aucubin on dry eye disease induced by urban particulate matter (UPM). Dry eye was induced in male SD rats (6 weeks old) by topical exposure to UPM thrice a day for 5 d. Eye drops containing 0.1% aucubin or 0.5% aucubin were topically administered directly into the eye after UPM exposure for an additional 5 d. Tear secretion was evaluated using a phenol red thread tear test and corneal irregularity. The oxidative damage in the lacrimal gland was evaluated using TUNEL and immunohistochemical staining. The topical administration of aucubin significantly attenuated UPM-induced tear hyposecretion (control group: 9.25 ± 0.62 mm, UPM group: 4.55 ± 0.25 mm, 0.1% aucubin: 7.12 ± 0.58 mm, and 0.5% aucubin: 7.88 ± 0.75 mm) and corneal irregularity (control group: 0.00 ± 0.00, UPM group: 3.40 ± 0.29, 0.1% aucubin: 1.80 ± 0.27, and 0.5% aucubin: 1.15 ± 0.27). In addition, aucubin also reduced the UPM-induced apoptotic injury of lacrimal gland cells induced by oxidative stress through the increased expression of HMGB1 and RAGE. These findings indicate that the topical administration of aucubin eye drops showed a beneficial effect against UPM-induced abnormal ocular changes, such as tear hyposecretion and lacrimal gland damage. Therefore, our results reveal the pharmacological activities of aucubin in dry eye disease.     

Resonant Raman‐based cytochrome C biosensor as a tool for evaluating the oxidative properties of the diesel exhaust particulate matter

Air pollution mostly originating from car exhaust and industrial emissions is seriously endangering human health. The study of toxic effects of particulate matter (PM) is a subject of very active research that covers a broad field from biology to chemistry and technology. The main issue of these works is the understanding of the oxidative properties of PM. In this paper, we present a quantitative analytical method based on the resonance Raman spectroscopy of cytocrome c that can be used to monitor the oxidative reactions that may take place between biological samples and PM. Copyright © 2016 John Wiley & Sons, Ltd.     

Morphology and Properties of Particulate Filled Polymers

Although the structure of particulate filled polymers is usually thought to be very simple, often structure related phenomena determine their properties. Segregation occurs only when long flow paths and large particles are used in production. The occurrence and extent of aggregation depend on the relative magnitude of attractive and separating forces, which prevail during the homogenization of the composite; the balance of adhesive and shear forces determines structure. Fillers of small particle size always aggregate, usually leading to decreased strength and especially low impact resistance. Anisotropic particles (talc, mica, short fibers) are orientated during processing. ESR is a relatively simple technique for the estimation of orientation and orientation distribution, which are determined by processing conditions, i.e. flow pattern, shear conditions, mold filling rates, cooling conditions, etc. The orientation of the particles strongly affects composite stiffness and strength. In practice, often several factors simultaneously influence the properties of products prepared from particulate filled polymers. Separation of the effects of the influencing factors is difficult, although such knowledge would help to control composite properties. The structure and properties of injection and compression moulded PP composites containing CaCO₃ or talc differs considerably from each other. The aggregation of CaCO₃, the nucleating effect and the orientation of talc affect product properties. The latter are also influenced by the skin-core structure developing during injection molding as well as by the orientation of the polymer. An example is discussed in this paper, which facilitates the identification of the effect of these factors with the help of a simple model and indicates a way in which product properties can be controlled.