COMBINED PARTIAL OXIDATION AND CARBONDIOXIDE REFORMING OF METHANE PROCESS TO SYNTHESIS GAS

IntroductionIthasbccndcmonstratcdthatmcthancrcformingt"ithcarbondioxidcpr0ducessynthcsisgasrichincarbonmonoxidc-x"hichisuscfulforthcs}nthcsisofaccticacid'dimcthylcthcrando.o-alcoholsll'2].Carbondioxidcref0rmingismorccndothcrmicthanstcamrcformingfCH4 CO2,'2CO 2H2Ai/'2,,=2473kJ..ol-1(l)Accordingl\"thisrcact1onnccdshighcrtcmpcraturcandlimitsspaccvclocityoffccdgas,Wehavcprct'ious1\studicdmcthancrcformingt"lthC02inthcmonotubcproccssl3J.Inordertoconvcrtmcthancinfccdgascomplctcl}',thcspaccvcloci…     

反相乳液聚合制备壳聚糖接枝共聚物及应用

以壳聚糖、丙烯酰胺、甲基丙烯酰氧乙基三甲基氯化铵为原料,硝酸铈铵为引发剂,Span-20为乳化剂,通过反相乳液聚合技术,合成壳聚糖阳离子接枝共聚物。分析讨论了乳化剂用量、引发剂浓度、油水体积比、单体配比、反应时间、反应温度对共聚物接枝率的影响,并采用正交试验方法对合成条件进行了优化。研究了其对重金属离子Cu2 、Cd2 、Zn2 的吸附性能。结果表明,在Cu2 、Cd2 、Zn2 的混合离子体系中,该共聚物对Cu2 、Zn2 有选择性吸附。     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

Consequences of sample size, variable selection, and model validation and optimisation, for predicting classification ability from analytical data

This article discusses problems of validating classification models especially in datasets where sample sizes are small and the number of variables is large. It describes the use of percentage correctly classified (%CC) as an indicator for success of a classification model. For small datasets, %CC should not be used uncritically and its interpretation depends on sample size. It illustrates the use of a common classification method, discriminant partial least squares (D-PLS) on a randomly generated dataset of 200 samples and 200 variables.

An aim of the classifier is to determine whether the null hypothesis (there is no distinction between two classes) can be rejected. Autoprediction gives an 84.5% CC. It is shown that, if there is variable selection, it must be performed independently on the training set to obtain a CC close to 50% on the test set; otherwise, over-optimistic and false conclusions can be reached about the ability to classify samples into groups.

Finally, two aims of determining the quality of a model are frequently confused, namely optimisation (often used to determine the most appropriate number of components in a model) and independent validation; to overcome this, the data should be split into three groups.

There are often difficulties with model building if validation and optimisation have been done on different groups of samples, especially using iterative methods, each group being modelled using properties, such as a different number of components or different variables.     

相转移催化合成增塑剂BBP和水杨醛的研究

相转移催化合成增塑剂ＢＢＰ和水杨醛的研究郭锡坤，高文华，曾东宇（汕头大学化学系，汕头５１５０６３）关键词相转移催化，季铵盐，聚乙二醇，邻苯二甲酸丁苄酯，水杨醛，增塑剂邻苯二甲酸丁苄酯（增塑剂ＢＢＰ）是一种优良的增塑剂．邻羟基苯甲醛（水杨醛）不仅是重要...     

基于天然氨基酸的双环手性季铵盐相转移催化剂的合成及催化性能研究

以L－脯氨酸及L－羟基脯氨酸为原料合成了4个新型手性季铵盐磁相转移催化 剂，并用于催化不对称查耳酮环氧化反应，高产率得到相应环氧化合物，ee最高达 9％。     

Volumetric properties of H2O, D2O, and methanol in acetonitrile at 278.15—318.15 K

The densities of H₂O, D₂O, and MeOH solutions in acetonitrile with the solute concentrations up to 0.07 molar fractions at 278.15, 288.15, 298.15, 308.15, and 318.15 K were measured using vibrating-tube densimetry with an error 8·10^–6 g cm^–3. The limiting partial molar volumes for the H/D isotopomers of water and IaII in acetonitrile (V^– ₂ ) and the isotope effects in V^– ₂ and in excess molar volumes of acetonitrile—water mixtures were calculated. Molecules of H₂O, D₂O, and IaII form associates with acetonitrile molecules via hydrogen bonds. The associates have the packing volumes close to those in the individual solute. The water and methanol molecules were assumed to be incorporated into the acetonitrile structure without substantial changes in the latter. However, this process results in some compression of the system with a simultaneous increase in its expansibility.     

Conductivity Studies of Dilute Aqueous Solutions of Oxalic Acid and Neutral Oxalates of Sodium, Potassium, Cesium, and Ammonium from 5 to 35°C

Conductivity measurements of oxalic acid and neutral oxalates (disodium oxalate, dipotassium oxalate, dicesium, and diammonium oxalate) were performed on dilute aqueous solutions, c < 3 × 10^–3 mol-dm^–3, from 5 to 35°C. These data and those available from the literature were analyzed in terms of dissociation steps of oxalic acid, the Onsager conductivity equation for neutral oxalates, the Quint–Viallard conductivity equation for the acid, and the Debye–Hückel equation for activity coefficients, to give the limiting equivalent conductances of bioxalate anion ;(HC₂O₄ ^–) and oxalate anion (1/2C₂O₄ ^2–) and the corresponding dissociation constants K ₁ and K ₂.     

Heat capacity of alcohols in aqueous solutions in the temperature range from 5 to 125°C

Using a precise technique of scanning microcalorimetry the heat capacity differences between water and dilute aqueous solutions of ethanol, n-propanol, n-butanol and n-pentanol were measured from 5 to 125°C and the partial molar heat capacities of these substances in water were determined. It was found that the heat capacity increment for alcohol disolved in water is proportional to the number of the-CH ₂ ^– groups and decrease with a temperature increase. The heat capacity increment of hydration of non-polar groups is shown to be positive and large at room temperature and decreases in magnitude as the temperature increases. In contrast, the heat capacity increment of hydration of polar groups is negative at room tempreature and increases as the temperature increases. From the temperature dependence of the heat capacity increment one can assume that the water molecules solvated by the non-polar groups of the alcohols behave in a non-cooperative manner.     

氯化钪-氯化钠-氯化钾熔盐制备新工艺研究

研究了以Sc2O3为原料，盐酸回流溶解后与NaCl，KCl，NH4Cl溶液混合，经蒸发浓缩、结晶、真空预脱水，再在氩气保护下分段升温脱水、升华除去过量NI-hCl后制备ScCl3-NaCl-KCl熔盐的新工艺。研究表明，添加NH4Cl后加热脱水时，NH4Cl分解产生的HCl气体能抑制ScCl3水合物加热过程中的水解，溶解产生的水不溶性钪，从而有效地防止了Sc2O3等水不溶化合物的生成。制备的ScCl3-NaCl-KCl熔盐脱水完全、水不溶性钪含量很低，能满足熔盐金属热还原法制备金属钪及铝钪中间合金对熔盐原料的要求。