1.5-MHz repetition rate passively Q-switched Nd:YVO_4 laser based on WS_2 saturable absorber

A transmission-type tungsten disulfide(WS_2)-based saturable absorber(SA) is fabricated and applied to passively Q-switched Nd:YVO_4 laser.The WS_2 nanosheets are deposited on a quartz substrate by the vertical evaporation method.By inserting the WS2 SA into the plano-concave laser cavity,we achieve 153-ns pulses with an average output power of1.19 W at 1064 nm.To the best of our knowledge,both of them are the best results among those obtained by the Q-switched solid-state lasers with WS_2-based absorbers.The repetition rate ranges from 1.176 MHz to 1.578 MHz.As far as we know,it is the first time that MHz level Q-switched pulses have been generated in all solid state lasers based on low-dimensional materials so far.     

Material transport in dip-pen nanolithography

Dip-pen na.nolithography （DPN） is a useful method for directly printing materials on surfaces with sub-50nm resolution. Because it, involves the physical transport of materials from a scanning probe tip to a surface and the subsequent chemical interaction of that material with the surface, there are many factors to consider when attempting to understand DPN. In this review, we overview the physical and chemical processes that are known to play a role in DPN, Through a detailed review of the literature, we classify inks into three general categories based on their transport properties, and highlight the myriad ways that. DPN can be used to perform chemistry at the tip of a scanning probe.     

Crystal field parameters and energy level structure of the MnO4 tetroxo anion in Li3PO4, Ca2PO4Cl and Sr5(PO4)3Cl crystals

A comparative study concerning the electronic structure of the Mn⁵⁺ ion in the Li₃PO₄, Ca₂PO₄Cl, Sr₅(PO₄)₃Cl host lattices has been carried out in the framework of the exchange charge model. The crystal field parameters have been evaluated using the structural data as the only input information. The 10 K absorption spectra of the investigated compounds have been measured in order to verify the correspondence between experimental and calculated energy levels. A systematic trend of the crystal field splitting of the most intense transitions has been evidenced and discussed by considering the symmetry properties of the coordination polyhedra around Mn⁵⁺.     

The structure and optical characters of the ZnO film grown on GaAs/Al2O3 substrate

In this paper ZnO films are grown on GaAs/Al₂O₃ substrates at different temperature by metal-organic chemical vapor deposition (MOCVD). The GaAs/Al₂O₃ substrates are formed by depositing GaAs layer (∼35 nm) on the Al₂O₃ substrate. The results of X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) demonstrate that most of the Ga and As atoms form Ga-As bond and the GaAs layer does not present any orientation. The characters of the ZnO films grown on GaAs/Al₂O₃ substrates are investigated by XRD, photoluminescence (PL), atomic force microscopy (AFM) and Raman scattering. Compared with ZnO film grown on Al₂O₃ substrate, ZnO film prepared by our fabrication scheme has good crystal and optical quality. Meanwhile its grain size becomes bigger according to the AFM image. Raman analysis indicates that the intrinsic defects and the in-plane tensile stress are obviously reduced in ZnO/GaAs/Al₂O₃ samples.     

Biosynthesis and magnetic properties of mesoporous Fe3O4 composites

Magnetic Fe₃O₄ materials with mesoporous structure are synthesized by co-precipitation method using yeast cells as a template. The X-ray diffraction (XRD) pattern indicates that the as-synthesized mesoporous hybrid Fe₃O₄ is well crystallized. The Barrett-Joyner-Halenda (BJH) models reveal the existence of mesostructure in the dried sample which has a specific surface area of 96.31 m²/g and a pore size distribution of 8-14 nm. Transmission electron microscopy (TEM) measurements confirm the wormhole-like structure of the resulting samples. The composition and chemical bonds of the Fe₃O₄/cells composites are studied by Fourier transform infrared (FT-IR) spectroscopy. Preliminary magnetic properties of the mesoporous hybrid Fe₃O₄ are characterized by a vibrating sample magnetometer (VSM). The magnetic Fe₃O₄/cells composites with mesoporous structure have potential applications in biomedical areas, such as drug delivery.     

颗粒有序堆积多孔介质对流换热实验研究

本文采用"瞬态单吹反问题研究方法"对颗粒有序堆积多孔介质内的强制对流换热进行了实验研究。详细研究了颗粒堆积方式变化对多孔介质内对流换热的影响,并对均匀与非均匀颗粒堆积多孔介质内的对流换热特性进行了对比分析。研究表明:通过对颗粒进行合理有序堆积,可以使相应多孔介质内的压降显著降低,其综合换热效率明显提高;通过拟合获得了颗粒有序堆积多孔介质内的宏观流动换热实验关联式,其形式与传统经验公式(Ergun公式和Wakao公式)一致,但部分模型参数值远低于传统经验公式。     

Optical planar waveguides in Yb³⁺-doped phosphate glasses produced by He⁺ ion implantation

Optical planar waveguides in Yb 3+-doped phosphate glasses are fabricated by implanting triple-energy helium ions. The guiding modes and the near-field intensity distribution are measured by using the prism-coupling method and the end-face coupling setup with a He-Ne laser at 633 nm The intensity calculation method (ICM) is used to reconstruct the refractive index profile of the waveguide. The absorption and the fluorescence investigations reveal that the glass bulk features are well preserved in the active volumes of the waveguides, suggesting the fabricated structures for possible applications as waveguide lasers.     

Exchange coupling and helical spin order in the triangular lattice antiferromagnet CuCrO₂ using first principles

The magnetic and electronic properties of the geometrically frustrated triangular antiferromagnet CuCrO2 are investigated by first principles through density functional theory calculations within the generalized gradient approximations (GGA)+U scheme. The spin exchange interactions up to the third nearest neighbours in the ab plane as well as the coupling between adjacent layers are calculated to examine the magnetism and spin frustration. It is found that CuCrO2 has a natural two-dimensional characteristic of the magnetic interaction. Using Monte-Carlo simulation, we obtain the Neel temperature to be 29.9 K, which accords well with the experimental value of 24 K. Based on non-collinear magnetic structure calculations, we verify that the incommensurate spiral-spin structure with (110) spiral plane is believable for the magnetic ground state, which is consistent with the experimental observations. Due to intra-layer geometric spin frustration, parallel helical-spin chains arise along the a, b, or a + b directions, each with a screw-rotation angle of about 120°. Our calculations of the density of states show that the spin frustration plays an important role in the change of d-p hybridization, while the spin-orbit coupling has a very limited influence on the electronic structure.     

Thermal and magnetic behavior of Angustifolia Kunth bamboo fibers covered with Fe3O4 particles

Several Angustifolia Kunth bamboo fibers, which have been previously treated with an alkaline solution, were coated with magnetite particles. The coating of the fibers was achieved by an in-situ co-precipitation method with Fe²⁺ and Fe³⁺in NaOH or NH₄OH. The fibers were evaluated by chemical analysis using atomic absorption (A.A.) technique, structural characterization by X-ray diffraction (XRD), thermal stability with thermo-gravimetric analysis (TGA) in nitrogen at temperature range between 23 °C and 800 °C and magnetic behavior using vibrating sample magnetometry (VSM) applying a magnetic field between −27 KOe and 27 KOe at room temperature. We found that the thermal stability and magnetization depend of the synthesis method used to cover the Angustifolia Kunth bamboo fibers. In addition, an improved magnetic response was observed when NaOH solution is used to generate the magnetite coating on the fiber surface.     

Temperature dependence of the Raman spectra of Bi2Te3 and Bi0.5Sb1.5Te3 thermoelectric films

The temperature dependence of the Raman spectra of Bi₂Te₃ and Bi_0.5Sb_1.5Te₃ thermoelectric films was investigated. The temperature coefficients of the E_g(2) peak positions were determined as –0.0137 cm^–1/°C and –0.0156 cm^–1/°C, respectively. The thermal expansion of the crystal caused a linear shift of the Raman peak induced by the temperature change. Based on the linear relation, a reliable and noninvasive micro‐Raman scattering method was shown to measure the thermal conductivity of the thermoelectric films. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)