Ab initio investigation into the structural, electronic and elastic properties of AlCu2TM (TM = Ti, Zr and Hf) ternary compounds

The Al-Cu-TM (TM = transition metal) alloy system has attracted great attention for both excellent glass-forming ability and its interesting physical properties. In this work, an investigation into the crystal, electrical and elastic properties of the AlCu₂TM (TM = Ti, Zr, and Hf) compounds has been conducted by first-principles calculations based on density-functional theory. The fully relaxed structure parameters of the AlCu₂TM compounds are in good agreement with previous experimental and other theoretical results. Besides, the cohesive energies of all the AlCu₂TM compounds have been evaluated. The energy band and densities of state of these compounds are also obtained. According to the calculated single crystal elastic constants, all the compounds are mechanically stable. The polycrystalline bulk moduli, shear moduli, Young’s moduli and Poisson’s ratio have been deduced by using Voigt-Reuss-Hill (VRH) approximations. The calculated negative Cauchy pressure and ratio of bulk modulus to shear modulus indicated that the AlCu₂TM compounds are ductile materials. The Debye temperatures of the AlCu₂TM compounds decrease with increasing the TM (Ti, Zr, and Hf) atomic number.     

不同窑口古代青瓷的产地特征的中子活化分析

产地属性是科学鉴别遗址和墓葬中出土的古陶瓷烧制产地的重要依据.用仪器中子活化（INAA）有损分析了浙江寺龙口越窑、江西洪州窑和陕西耀州窑出土的古瓷碎片样品,通过实验数据的统计分析,结果表明3个窑口古瓷的元素组成具有各自的特征,它们之间具有可以区分的依据,寺龙口越窑与南方江西洪州窑的制胎原料关系较近,与北方陕西耀州窑的关系较远.这些试验结果将为古陶瓷地研究提供重要参数.Provenance characteristic is an important scientific parameter to identify ancient porcelain wares unearthed from sites and graves.The porcelain samples of Si Long Kou kiln of Zhejiang Province,Hong Zhou kiln of Jiangxi Province and Yao Zhou kiln of Shanxi Province have been analyzed with neutron activation analysis(NAA) in this paper.The experimental data were studied with statistic methods.The results show that the chemical compositions of porcelain body samples for three kilns were different. The difference was been able identified. The body materials of both Si Long Kou Yue kiln and Hong Zhou kiln of Jiangxi were similar. The samples of Yao Zhou kiln in north of China existed obvious difference.     

3 ω线法测量液体热参数影响因素分析

首先给出基于谐波探测技术测量液体导热系数和热扩散系数的3ω线法的基本原理.采用实验和理论分析相结合的方法,分析了加热丝结构参数和自身热参数对温度波动和测量结果的影响.给出了加热丝直径和长度的合理范围.液体导热系数比较小时可以利用三次谐波的实部和虚部的交点测量液体的比热容.     

含铕配合物荧光纳米纤维的制备及光学性质的研究

通过静电纺丝技术,将发光良好的稀土配合物Eu(DBM)₃·H₂O和Eu(DBM)₄·CPC纳米微粒复合到水溶性的聚乙烯基吡咯烷酮中,制备了具有稀土铕离子红色特性荧光的聚合物纳米纤维。通过对稀土配合物以及聚合物纳米纤维样品扫描电镜和透射电镜的测试,发现当稀土配合物复合到聚合物纳米纤维中后,由于与聚乙烯基吡咯烷酮乙醇溶解性良好,其微观结构发生了变化,得到了50～100 nm左右的比较均匀的线状结构。同时,通过对稀土配合物以及聚合物纳米纤维样品的荧光激发、发射光谱及荧光寿命进行研究,表明稀土配合物在聚合物纳米纤维中比其在粉末状有更高的发光强度及更长的荧光寿命,其原因在于高分子纳米纤维为稀土配合物提供了较稳定的化学环境。     

Cr,Ag共掺杂ZnS纳米材料的制备及其对活性染料的吸附性能

通过水热法制备了纤锌矿ZnS∶Cr,Ag共掺杂纳米材料,考察了不同反应时间以及不同Cr和Ag掺杂比例对ZnS纳米材料光学性能的影响。分别采用荧光分光光度计、红外光谱仪、X射线衍射仪(XRD)、扫描电子显微镜(SEM)等对Cr和Ag共掺杂ZnS纳米材料的光学性能和结构等进行了表征,探讨了ZnS∶Cr, Ag共掺杂纳米材料分别对甲基紫(MV)、丁基罗丹明B(BRB),四氯四溴荧光素(TCTBF)以及曙红B(EB)四种活性染料的吸附性能。结果表明,Cr3+和Ag+取代和嵌入到了Zn2+的位置,掺入到了ZnS的晶格中。由光学表征和扫描电镜(SEM)发现,掺杂后ZnS纳米材料的光学性能和形貌发生了改变。掺入Cr和Ag后,使得Zn纳米材料的荧光强度降低,且其形貌较规则,表面蓬松,呈绒球形状。当反应时间为12 h,Cr和Ag掺杂比例分别为1%时,掺杂ZnS纳米材料的形貌和光学性能最佳。运用N₂等温吸脱附分析技术计算了Cr和Ag共掺杂ZnS材料的比表面积和孔径分布,将其用于对MV,BRB,TCTBF以及EB四种活性染料的吸附研究,并分别从吸附时间、温度、pH值等因素考察了掺杂ZnS对几种活性染料吸附性能的影响,得出了Cr和Ag共掺杂ZnS材料在pH 7,室温下,分别经9,11,9和9 h吸附时间后对四种活性染料的吸附效果达到最佳。     

Improvement of modified analytic embedded atom method potentials for noble metals and Cu

The modified analytic embedded atom model (EAM) potentials considering farther neighbor atoms are improved for the noble metals (Ag, Au, Pt, Pd, Rh) and Cu. We not only adopt an end processing function and an enhanced smooth continuous condition for the pair potential, but also adjust the model parameters of multi-body potential by fitting a cohesive energy, a mono-vacancy formation energy, the Rose equation curve for the cohesive energy as a function of lattice parameter, a structure energy difference, elastic parameters and an equilibrium condition of crystal. The calculation results of structure energy differences misfit the experiment data for the noble metals and Cu in the unimproved EAM, because anyone of these differences have not been considered in the calculation of its model parameters. After the modification, the model showed better simulation results for the noble metals and Cu.     

制备工艺对Zn1-xMgxO薄膜结构及光学性能的影响

采用脉冲激光沉积（PLD）方法在单晶Si（100）衬底上沿c轴方向生长单晶Zn_1-xMg_xO薄膜,通过X射线衍射（XRD）、原子力显微镜（AFM）、扫描电镜（SEM）和荧光光谱（PL）研究了膜厚、Mg含量、退火温度及氧气氛等制备工艺对Zn_1-xMg_xO薄膜的结构、形貌和光学性质的影响.实验结果表明,Mg含量x≤0.15时, Zn_{关键词： 1-x}Mg_xO薄膜')" href="#">Zn_1-xMg_xO薄膜 制备工艺 结构 光学性质     

SiC缓冲层对Si表面生长的ZnO薄膜结构和光电性能的改善

用脉冲激光沉积(PLD)技术制备了ZnO/SiC/Si和 ZnO/Si薄膜并制成了紫外探测器。利用X射线衍射(XRD),光致发光(PL)谱,I-V曲线和光电响应谱对薄膜的结构和光电性能进行了研究。实验结果表明:SiC缓冲层改善了ZnO薄膜的结晶质量和光电性能,其原因可能是SiC作为柔性衬底能够减少ZnO与Si 之间大的晶格失配和热失配导致的界面缺陷和界面态。     

Structural and magnetic characteristics of Co1−xNix/2Srx/2Fe2O4 nanoparticles

Co_1−xNi_x/2Sr_x/2Fe₂O₄ (x=0–0.5 in steps of 0.1) ferrite nanoparticles have been synthesized at room temperature, without calcination, using a reverse micelle process. The site preference was determined by Mössbauer spectroscopy at 300 K. The hyperfine parameters were obtained, for the whole series of solid solutions. For the X≤0.20 samples, the spectra were fitted with two discrete sextets and for the X>0.20 samples, a magnetic hyperfine field distribution and a doublet were also imposed in the fit procedure. Hysteresis loops were measured using a superconducting quantum interference device magnetometer at 2 K and 300 K. The results indicate that the relative decrease in saturation magnetization of nanoparticles compared to the submicron particles could be attributed to a surface spin termination and disorder. Magnetic dynamics of the nanoparticles was studied by the measurement of ac magnetic susceptibility versus temperature at different frequencies and it is found that the results are well described by the Vogel–Fulcher model.     

The frequency dependence of demagnetizing factor of a Fe-based amorphous ribbon

The frequency dependence of total and internal demagnetizing factors has been investigated. A minimum of the demagnetizing factor at optimal frequency of magnetization reversal is revealed. The influence of the demagnetizing factor on the frequency dependence of magnetic properties of amorphous ribbon is studied.