Enthalpies of Dilution of D-p-Hydroxyphenylglycine in Buffer Solutions at Different pH

The effect of pH on the dilution enthalpies of D-p-hydroxyphenylglycine in phosphate buffer solutions has been investigated by isothermal titration microcalorimetry at 298.15 K. The corresponding homogeneous enthalpic interaction coefficients have been calculated according to the excess enthalpy concept. The results show that the enthalpies of dilution of D-p-hydroxyphenylglycine in phosphate buffer solutions at different pH are all positive. The overall trend is that enthalpies of dilution become more positive with an increase of pH, but there is a minimum of the enthalpy of dilution at pH = 7.0. The enthalpic pair interaction coefficients, h ₂, all have negative values. The results are interpreted from the point of view of solute-solute and solute-solvent interactions involved in the solvent effects.     

Kinetic studies of the urease-catalyzed hydrolysis of urea in a buffer-free system

The kinetics of urea hydrolysis catalyzed by urease, mainly in the absence of buffers by use of the self-buffer effect of the products, was investigated. The effect of pH, temperature, and concentration of enzyme, substrate, product, salt ions, and buffers on the kinetic behavior of urease was examined. A kinetic model of a modified Michaelis-Menten form, incorporating substrate and product inhibition, pH dependence, and temperature effect, was developed to describe the reaction rate. Experimental data indicated that urease in a buffer-free solution was less susceptible to the inhibition of substrate product. The Michaelis constant keeps almost constant with the variation of pH and temperature, and increases with the addition of buffers and salts. The data also suggested that the noncompetitive pattern of the product inhibition, which is not significantly affected by temperature, increases gently with increasing pH. A Monod form rate expression was proposed to analyze the pH effect on the maximum rate. The proposed kinetic model was also examined by the long-time experiments in which pH, substrate, and product concentration varied obviously during the reaction course.     

Interactions of dicarboxylic porphyrins with membranes in relation to their ionization state

The interactions of dicarboxylic porphyrins with membrane systems are discussed with particular emphasis on the effect of the charge of the porphyrin and the nature of the side-chains. The incorporation of hematoporphyrin or related dicarboxylic porphyrins within small unilamellar vesicles as membrane models is favored by a decrease of the pH in the range of physiological pH values. This effect might play an important role in the retention of porphyrins by tumors, which are more acidic than normal tissues. Kinetics studies also show that the partition of the porphyrin between the lipidic bilayer and the aqueous phase is governed by its release rate rather than by its incorporation rate.     

Fourier transform infrared spectroscopy study of the effect of pH on anion and cation adsorption onto poly(acrylo‐amidino diethylenediamine)

The role of hydrogen bonding in the chemistry of transition‐metal complexes remains a topic of intense scientific and technological interest. Poly(acrylo‐amidino diethylenediamine) was synthesized to study the effects of hydrogen bonding on complexes at different pHs. The polymer was synthesized through the coupling of diethylene triamine with polyacrylonitrile fiber in the presence of AlCl₃ · 6H₂O addition. The adsorption capacity of this polymer was 11.4 mequiv/g. The ions used for the adsorption test were CrO, PO, Cu²⁺, Ni²⁺, Fe²⁺, and Ag⁺. All experiments were confirmed with Fourier transform infrared. In the study of anion adsorption, at low pHs, only ionic bonds existed, whereas at high pHs, no bonds existed. However, in the middle pH region, both ionic bonds and hydrogen bonds formed between poly(acrylo‐amidino diethylenediamine) and the chromate ion or phosphate ion. When poly(acrylo‐amidino diethylenediamine) and metal ions (Cu²⁺, Ni²⁺, Fe²⁺, and Ag⁺) formed complexes, a hydrogen‐bonding effect was not observed with Fourier transform infrared. The quantity of metal ions adsorbed onto poly(acrylo‐amidino diethylenediamine) followed the order Ag⁺ > Cu²⁺ > Fe²⁺ > Ni²⁺. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2010–2018, 2004     

Solid-state pH nanoelectrode based on polyaniline thin film electrodeposited onto ion-beam etched carbon fiber

An ultramicro pH sensor has been constructed based on a thin polyaniline film that was electrochemically deposited onto a carbon fiber nanometer-size electrode. The substrate nanoelectrodes were fabricated using ion-beam conically etched carbon fibers with tip diameters ranging ca. from 100 to 500 nm. The polyaniline film was deposited from HCl solution containing the aniline monomer by cycling the potential between −0.2 and +1.0 V. The electromotive force (emf) signal between the pH sensitive polyaniline-coated nanoelectrode and an Ag/AgCl reference electrode was linear over the pH range of 2.0-12.5 with a slightly super-Nernstian slope of ca. −60 mV/pH unit. Response times ranged from several sec at pHs around 7 up to 2 min at pH 12.5. The proposed pH nanoelectrode displayed high ion selectivity with respect to K⁺, Na⁺, Ca²⁺, and Li⁺, with log K_H,M values around −12 and has a working lifetime of about 20 days. Key parameters important for the pH nanoelectrode performance, including polyaniline film preparation, selectivity, response time, temperature dependence, relative coating thickness, stability, and reproducibility, have been characterized and optimized. The performance of the pH nanoelectrode was examined by measuring the pH of several real samples including body fluids (serum, urine) and low ionic strength water samples (rain, deionized and tap water). The results agreed very well with those obtained by using commercial glass pH electrodes. The proposed pH nanoelectrode demonstrated attractive properties and seems particularly promising for use under physiological conditions.     

Analysis of basic compounds at high pH values by reversed-phase liquid chromatography

Reversed phase high performance liquid chromatography (RPLC) is currently the method of choice for the analysis of basic compounds. However, with traditional silica materials, secondary interactions between the analyte and residual silanols produce peak tailing which can negatively affect resolution, sensitivity, and reproducibility. In order to reduce these secondary interactions, which comprise ion exchange, hydrogen bonding, and London forces interactions, chromatographic analyses can be carried out at low or high pH values where silanol groups and basic compounds are mostly uncharged. The chromatographic behaviour of a particular bidentate stationary phase, Zorbax Extend C18, was studied with a set of basic and neutral compounds. Thanks to a higher chemical stability than traditional silica based supports, analyses were carried out with a high pH mobile phase, which represents a good alternative to the acidic mobile phases generally used to reduce ion exchange interactions. The performance of this bidentate stationary phase was also compared with that of other supports and it was proved that it is advantageous to work with high pH mobile phases when analyzing basic compounds.     

Sample-induced internal pH gradients in microcolumn liquid chromatography of proteins

Summary The technique of an internal pH gradient induced by the sample is applied to the separation of proteins by liquid chromatography. Compatibility of the method with microcolumns is demonstrated and examples of separations on different types of sorbents are given.     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Performance characteristics of suspended particulate reagent-iminodiacetate as a binding agent for diffusive gradients in thin films

The performance characteristics of an alternative binding agent, suspended particulate reagent-iminodiacetate (SPR-IDA), for use with DGT methodology were investigated. The parameters investigated during this study included gel hydration, blank levels, elution factor (f_e), capacity, the effects of pH on the binding of trace metals by DGT. The novel application of this resin for use as a quantitative standard for laser ablation ICP-MS was also evaluated. To further constrain the results for the SPR-IDA binding agent, parallel experiments were performed using resin gel containing Chelex 100, which has been widely reported in the literature. Hydration results showed that the SPR-IDA resin gel reached a stable dimension and weight within ∼30 min and was dimensionally stable for ≤6 months. The measured DGT blanks for the SPR-IDA resin were 0.0023, 0.15, 0.21, 0.0033 and 0.011 ng disc⁻¹ for Co, Ni, Cu, Cd and Pb, respectively. The elution factor differed for the two resin types with the Chelex 100 recoveries slightly lower than previous reports and the SPR-IDA resin showing on average ∼5-9% better recoveries than DGT containing Chelex 100. The measured capacity of DGT discs containing the SPR-IDA binding agent was 0.26 mg Cd, similar to the calculated value of 0.29 mg Cd, indicating the entire resin layer was available for metal uptake.Both resin types performed equally well when deployed in 1 mM NaNO₃ solutions with DGT measurements of ∼100% of direct solution measurements for Co, Ni and Cd. However, DGT measurements of Cu and Pb systematically decreased with increasing solution pH down to ∼50% of solution values at pH 8.0, due to artifacts resulting from colloid formation during the addition of the metals. This was remedied by adding the metals as dilute salt standards and addition of Mg(NO₃)₂ to eliminate adsorption to the container walls. In the latter experiments, DGT measured concentrations of Co, Ni, Cu, Cd and Pb were in agreement with solution concentrations. Deployment of DGT in solutions with increasing concentrations of trace metals yielded linear results, suggesting that quantitative analysis using simplified laser ablation techniques should be possible using this newly characterized SPR-IDA resin gel.