Spectrophotometric Studies of Entrapped Thymol Phtalein pH Indicator into Sol‐Gel Matrix

This research involves the behavior of thymol phtalein pH indicator entrapped into the sol‐gel derived inorganic matrix. The method is based on the physical entrapment of the reagent molecules in the sol‐gel matrix. The immobilized thymol phthalein pH indicator shows behavior similar to its solution counterpart. The UV/vis spectra indicate that the thymol phthalein retains its structure during the sol‐gel reactions in terms of response to pH. Thymol phthalein can be regarded as uniformly distributed in the sol‐gel matrix. This observation has been confirmed using polarized microscopy. This research shows that thymol phtalein can be immobilized in sol‐gel glasses and used as a solid pH sensor.     

Encapsulation of Phenolphthalein pH-Indicator into a Sol-Gel Matrix

Transparent monolithic silica doping with phenolphthalein has been prepared via the acid-catalyzed sol-gel reactions of tetraethylorthosilicate in the presence of phenolphthalein. The immobilized phenolphthalein pH-indicator shows similar behavior as its solution counterpart. The UV/Vis spectra indicate that the phenolphthalein retains its structure during the sol-gel reactions in terms of response to pH. The phenolphthalein can be regarded as uniformly distributed in the silica matrix. This observation has been confirmed using polarized microscopy.     

Water‐in‐Crude Oil Emulsions in the Burgan Oilfield: Effects of Oil Aromaticity,Resins to Asphaltenes Content (R/(R+A)), and Water pH

Asphaltenes and resins separated from emulsion samples collected from Burgan oil field were used with heptane‐toluene mixtures as model oil to study the effect of oil aromaticity, resin content, and pH of the aqueous phase on the stability of water in model emulsions. It was confirmed that, as long as the asphaltenes are completely solubilized, increasing aromaticity leads to less stable emulsions. A consistent correlation between emulsion stability and relative resin mass content (R/(R+A)) was observed for all three of the field samples. There was a sharp decrease in stability when the R/(R+A) value exceeded 0.75. Emulsion stability was enhanced at high pH and possibly at very low pH (<2).     

Nanoscale Control of Polyoxometalate Assembly: A {Mn8W4} Cluster within a {W36Si4Mn10} Cluster Showing a New Type of Isomerism

Two near isomeric clusters containing a novel {Mn₈W₄} Keggin cluster within a [W₃₆Mn₁₀Si₄O₁₃₆(OH)₄(H₂O)8]^24? cluster are reported: K₁₀Li₁₄ [W₃₆Si₄O₁₃₆Mn^II₁₀(OH)₄(H₂O)₈] ( 1 ) and K₁₀Li1_3.5Mn_0.25[W₃₆Si₄O₁₃₆Mn^II₁₀(OH)₄(H₂O)₈] ( 1′ ). Bulk characterization of the clusters has been carried out by single crystal X‐ray structure analysis, ICP‐MS, TGA, ESI‐MS, CV and SQUID‐magnetometer analysis. X‐ray analysis revealed that 1′ has eight positions within the central Keggin core that were disordered W/Mn whereas 1 contained no such disorder. This subtle difference is due to a differences is how the two clusters assemble and recrystallize from the same mother liquor and represents a new type of isomerism. The rapid recrystallization process was captured via digital microscopy and this uncovered two “intermediate” types of crystal which formed temporarily and provided nucleation sites for the final clusters to assemble. The intermediates were investigated by single crystal X‐ray analysis and revealed to be novel clusters K₄Li₂₂[W₃₆Si₄Mn₇O₁₃₆(H₂O)₈]?56 H₂O ( 2 ) and Mn₂K₈Li₁₄[W₃₆Si₄Mn₇O₁₃₆(H₂O)₈]?45 H₂O ( 3 ). The intermediate clusters contained different yet related building blocks to the final clusters which allowed for the postulation of a mechanism of assembly. This demonstrates a rare example where the use X‐ray crystallography directly facilitated understanding the means by which a POM assembled.     

Integrated Hollow Mesoporous Silica Nanoparticles for Target Drug/siRNA Co‐Delivery

A hollow mesoporous silica nanoparticle (HMSNP) based drug/siRNA co‐delivery system was designed and fabricated, aiming at overcoming multidrug resistance (MDR) in cancer cells for targeted cancer therapy. The as‐prepared HMSNPs have perpendicular nanochannels connecting to the internal hollow cores, thereby facilitating drug loading and release. The extra volume of the hollow core enhances the drug loading capacity by two folds as compared with conventional mesoporous silica nanoparticles (MSNPs). Folic acid conjugated polyethyleneimine (PEI‐FA) was coated on the HMSNP surfaces under neutral conditions through electrostatic interactions between the partially charged amino groups of PEI‐FA and the phosphate groups on the HMSNP surfaces, blocking the mesopores and preventing the loaded drugs from leakage. Folic acid acts as the targeting ligand that enables the co‐delivery system to selectively bind with and enter into the target cancer cells. PEI‐FA‐coated HMSNPs show enhanced siRNA binding capability on account of electrostatic interactions between the amino groups of PEI‐FA and siRNA, as compared with that of MSNPs. The electrostatic interactions provide the feasibility of pH‐controlled release. In vitro pH‐responsive drug/siRNA co‐delivery experiments were conducted on HeLa cell lines with high folic acid receptor expression and MCF‐7 cell lines with low folic acid receptor expression for comparison, showing effective target delivery to the HeLa cells through folic acid receptor meditated cellular endocytosis. The pH‐responsive intracellular drug/siRNA release greatly minimizes the prerelease and possible side effects of the delivery system. By simultaneously delivering both doxorubicin (Dox) and siRNA against the Bcl‐2 protein into the HeLa cells, the expression of the anti‐apoptotic protein Bcl‐2 was successfully suppressed, leading to an enhanced therapeutic efficacy. Thus, the present multifunctional nanoparticles show promising potentials for controlled and targeted drug and gene co‐delivery in cancer treatment.     

Study of the retention behavior of small polar molecules on different types of stationary phases used in hydrophilic interaction liquid chromatography

The retention behavior of a large group of analytes (35) with varied properties (pK_a and logP) was studied on eight hydrophilic interaction LC columns with different surfaces, stationary phase chemistries, and types of particles. The acetonitrile content (5–95%), buffer concentration (0.5–200 mM), and pH of the mobile phase (3.8 and 6.8) were evaluated for their effects on the retention behavior. The type of stationary phase had a significant impact on the selectivity and retention time of the tested analytes. Completely different selectivity was observed on the aminopropyl stationary phase. In this study, the influence of the buffer concentration was similar for all tested columns, except for the aminopropyl stationary phase. Increasing the buffer concentration led to decreased retention times for the basic compounds and increased retention times for the acidic compounds, while the inverse behavior was observed on the aminopropyl stationary phase. The selectivity of the individual stationary phases was evaluated at pH 3.8 and 6.8. Much lower selectivity differences between the stationary phases were observed at pH 6.8 than pH 3.8. Bare silica stationary phases were used in the comparison of the particles (fused‐core and fully porous particles of 3 and 1.7 μm) and the columns provided by different manufacturers.     

Rapid quantitative analysis of individual anthocyanin content based on high‐performance liquid chromatography with diode array detection with the pH differential method

A new quantitative technique for the simultaneous quantification of the individual anthocyanins based on the pH differential method and high‐performance liquid chromatography with diode array detection is proposed in this paper. The six individual anthocyanins (cyanidin 3‐glucoside, cyanidin 3‐rutinoside, petunidin 3‐glucoside, petunidin 3‐rutinoside, and malvidin 3‐rutinoside) from mulberry (Morus rubra) and Liriope platyphylla were used for demonstration and validation. The elution of anthocyanins was performed using a C₁₈ column with stepwise gradient elution and individual anthocyanins were identified by high‐performance liquid chromatography with tandem mass spectrometry. Based on the pH differential method, the high‐performance liquid chromatography peak areas of maximum and reference absorption wavelengths of anthocyanin extracts were conducted to quantify individual anthocyanins. The calibration curves for these anthocyanins were linear within the range of 10–5500 mg/L. The correlation coefficients (r²) all exceeded 0.9972, and the limits of detection were in the range of 1–4 mg/L at a signal‐to‐noise ratio ≥5 for these anthocyanins. The proposed quantitative analysis was reproducible with good accuracy of all individual anthocyanins ranging from 96.3 to 104.2% and relative recoveries were in the range 98.4–103.2%. The proposed technique is performed without anthocyanin standards and is a simple, rapid, accurate, and economical method to determine individual anthocyanin contents.     

Photo‐ and pH‐Tunable Multicolor Fluorescent Nanoparticle‐Based Spiropyran‐ and BODIPY‐Conjugated Polymer with Graphene Oxide

We report a stimuli‐responsive fluorescent nanomaterial, based on graphene oxide coupled with a polymer conjugated with photochromic spiropyran (SP) dye and hydrophobic boron dipyrromethane (BODIPY) dye, for application in triggered target multicolor bioimaging. Graphene oxide (GO) was reduced by catechol‐conjugated polymers under mildly alkaline conditions, which enabled to formation of functionalized multicolor graphene nanoparticles that can be induced by irradiation with UV light and by changing the pH from acidic to neutral. Investigation of these nanoparticles by using AFM, fluorescence emission, and in vitro cell and in vivo imaging revealed that they show different tunable colors in bioimaging applications and, more specifically, in cancer‐cell detection. The stability, biocompatibility, and quenching efficacy of this nanocomposite open a different perspective for cell imaging in different independent colors, sequentially and simultaneously.