Broadband dielectric characterization of piezoelectric poly(vinylidene fluoride)thin films between 278 K and 308 K

This work describes the dielectric properties of piezoelectric poly(vinylidene fluoride) (PVDF) thin films in the frequency and temperature ranges relevant for usual applications. We measured the isothermal dielectric relaxation spectra of commercial piezoelectric PVDF thin films between 10 Hz to 10 MHz, at several temperatures from 278 K to 308 K. Measurements were made for samples in mechanically free and clamped conditions, in the direction of the poling field (perpendicular to the film). We found that the imaginary part of the dielectric relaxation spectra of free and clamped PVDF samples is dominated by a peak, above 100 kHz, that can be characterized by a Havriliak-Negami function. The characteristic time follows an Arrhenius dependence on temperature. Moreover, the spectra of the free PVDF samples show two additional peaks at low frequencies which are associated with mechanical relaxation processes. Our results are important for the characterization of piezoelectric PVDF, particularly after the stretching and poling processes in thin films, and for the design and characterization of a broad range of ultrasonic transducers.     

Electrical conductivity of poly(vinylidene fluoride)/polyaniline blends under oscillatory and steady shear conditions

Blends of poly(vinylidene fluoride) (PVDF) and polyaniline (PAni) were prepared through melt blending in a batch mixer. The morphology, rheological behavior and electrical conductivity were investigated through transmission electron microscopy (TEM) and combined electro-rheological measurements. Through TEM analysis, it was possible to observe that all blends showed typical phase separation with the presence of conductive polymer aggregates. Deformations imposed during a strain sweep caused, not only disturbance of the linear viscoelastic behavior, but also changes in electrical conductivity. The oscillatory shear altered the morphology, breaking the PAni domains into smaller ones. This effect increases the distance between them and, consequently, resulted in a decrease of the electrical conductivity. The measurements under quiescent conditions and steady shear proved that the disturbance in morphology for PVDF/PAni system is non-recoverable. Through combined electrical and rheological measurements, it was possible to achieve good correlation between the electrical and flow behavior of PVDF/PAni blends.     

New basis sets for the evaluation of interaction‐induced electric properties in hydrogen‐bonded complexes

Interaction‐induced static electric properties, that is, dipole moment, polarizability, and first hyperpolarizability, of the CO? (HF)_n and N₂? (HF)_n, n = 1–9 hydrogen‐bonded complexes are evaluated within the finite field approach using the Hartree–Fock, density functional theory, Møller–Plesset second‐order perturbation theory, and coupled cluster methods, and the LPol‐n (n = ds, dl, fs, fl) basis sets. To compare the performance of the different methods with respect to the increase of the complex size, we consider as model systems linear chains of the complexes. We analyze the results in terms of the many‐body and cooperative effects. © 2012 Wiley Periodicals, Inc.     

A PEGylated Fluorescent Turn‐On Sensor for Detecting Fluoride Ions in Totally Aqueous Media and Its Imaging in Live Cells

Owing to the considerable significance of fluoride anions for health and environmental issues, it is of great importance to develop methods that can rapidly, sensitively and selectively detect the fluoride anion in aqueous media and biological samples. Herein, we demonstrate a robust fluorescent turn‐on sensor for detecting the fluoride ion in a totally aqueous solution. In this study, a biocompatible hydrophilic polymer poly(ethylene glycol) (PEG) is incorporated into the sensing system to ensure water solubility and to enhance biocompatibility. tert‐Butyldiphenylsilyl (TBDPS) groups were then covalently introduced onto the fluorescein moiety, which effectively quenched the fluorescence of the sensor. Upon addition of fluoride ion, the selective fluoride‐mediated cleavage of the Si? O bond leads to the recovery of the fluorescein moiety, resulting in a dramatic increase in fluorescence intensity under visible light excitation. The sensor is responsive and highly selective for the fluoride anion over other common anions; it also exhibits a very low detection limit of 19 ppb. In addition, this sensor is operative in some real samples such as running water, urine, and serum and can accurately detect fluoride ions in these samples. The cytotoxicity of the sensor was determined to be Grade I toxicity according to United States Pharmacopoeia and ISO 10993‐5, suggesting the very low cytotoxicity of the sensor. Moreover, it was found that the senor could be readily internalized by both HeLa and L929 cells and the sensor could be utilized to track fluoride level changes inside the cells.     

Electrogenerated acetonitrile anions/tetrabutylammonium cations: an effective catalytic system for the synthesis of novel chromeno[3′,4′:5,6]pyrano[2,3-d]pyrimidines

An efficient and convenient synthesis of novel chromeno[3′,4′:5,6]pyrano[2,3-d]pyrimidines is described, using the electrogenerated anion of acetonitrile as the base in the presence of tetrabutylammonium fluoride as an effective supporting electrolyte in a one-pot, three-component condensation of barbituric acid, an aromatic aldehyde or isatin, and 4-hydroxycoumarin. The reaction is carried out in an undivided cell containing an iron electrode as the cathode and a Pt electrode as the anode, at a constant current at room temperature.     

纳米储能纤维复合过滤膜的制备及性能

以静电纺丝技术制备的同轴聚甲基丙烯酸十八烷基酯(PSMA)/聚对苯二甲酸乙二酯(PET)纳米储能纤维为支撑层,经聚偏氟乙烯(PVDF)涂覆成膜和溶剂化处理,制备了一种低压高水通量的纳米储能纤维复合过滤膜(NFCM),其中以水或乙醇为凝固溶液的复合过滤膜分别记为NFCM@H2O或NFCM@EtOH.分析并讨论了不同溶剂处理方式对NFCM力学性能和表面形貌的影响,表征了膜的纯水通量和抗污性能,用扫描电子显微镜(SEM)观察了膜的横断面形貌.结果表明,PSMA/PET纳米储能纤维具有明显的吸放热行为,熔融温度和热焓值分别为36.5℃和10.7J/g,NFCM的熔融温度和热焓值分别为36℃和2.7J/g.NFCM的形貌结构、纯水通量和截留率与溶剂处理方式相关,NFCM@EtOH膜的水通量介于100~1400L/(m2·h)之间,而NFCM@H2O膜的水通量仅在40~220L/(m2·h)之间.NFCM的拉伸强度由初始0.925MPa(PVDF)提高到4.28MPa以上.NFCM中的相变材料对膜过滤性能有重要影响,并在过滤温度低于50℃时具有减缓作用.     

Strong Stokes and Upconversion Luminescence from Ultrasmall Ln3+‐Doped BiF3 (Ln=Eu3+, Yb3+/Er3+) Nanoparticles Confined in a Polymer Matrix

Heavy metal fluorides like BiF₃ as a host for lanthanide ions are of interest as bismuth is the only heavy metal that is nontoxic. In this work, we report the synthesis of highly water‐dispersible ultrasmall BiF₃ nanoparticles about 6 nm in size within a poly(vinyl pyrrolidone) matrix by a hydrothermal method. Microscopy analysis reveals that the nanoparticles are well separated and confined within the polymer network. These nanoparticles were found to be excellent hosts for lanthanide (Ln³⁺) ions. Through suitable Ln³⁺ doping, BiF₃ exhibits strong emissions in the visible region upon both UV and near infrared (NIR) excitations. The non‐toxicity of both bismuth and PVP can be advantageous for the potential use of BiF₃ nanoparticles in drug delivery and bioimaging.     

The Research of Sulfuric Acidic Recycling of Aluminum Industry Fluorine-containing Waste Products

The article presents the method of recycling aluminum industry fluorine-containing waste products to produce hydrogen fluoride. We carried out the estimate of the thermodynamic parameters of sulfuric acidic recycling of fluorine-containing waste products. We considered the necessity of waste products preliminary oxidizing roast stage to reduce carbonic constituent due to the interaction between carbonic constituent blocks of the sulfuric acid and waste products. We also carried out the researches for kinetic characteristics and to determine the optimal conditions for the to recycle sulfuric acidic in the fluorine-containing waste products.     

Research of Fluorination Process of Rutile Concentrate

The brief review of industrial technologies of titanium-containing concentrates processing has been carried out. Drawbacks of the existing titanium manufacture schemes are shown and the necessity of the essentially new fluoride technologies development has been proved. The reactions proceeding during the fluorination of rutile concentrate with element fluoride are described in the given work. The thermodynamic research of the process has been carried using ASTRA software. Dependence of mass concentration change of titanium tetrafluoride has been investigated in products of reaction on the temperature of the process, and the choice of optimum excess of fluoride has been proved.     

Chemo- and Site-Selective Electro-Oxidative Alkane Fluorination by C(sp3)−H Cleavage

Electrochemical fluorinations of C(sp³)−H bonds with a nucleophilic fluoride source have been accomplished in a chemo- and site-selective fashion, avoiding the use of electrophilic F⁺ sources and stoichiometric oxidants. The introduced metal-free strategy exhibits high functional group tolerance, setting the stage for late-stage fluorinations of biorelevant motifs. The synthetic utility of the C(sp³)−H fluorination was reflected by subsequent one-pot arylation of the generated benzylic fluorides.