水介质中α,α-双(4-羟基香豆素-3-基)甲苯的洁净合成

在水介质中三乙基苄基氯化铵(TEBA)存在下, 芳醛与4-羟基香豆素反应为α,α-双(4-羟基香豆素-3-基)甲苯提供了一种快速、方便、高效和洁净的合成方法.     

负载型钙钛矿La0.8Sr0.2MnO3/SBA-15催化燃烧甲苯的研究

采用逐层负载-孔道内氨/水蒸气原位羟化法制备了一系列负载型钙钛矿La_0.8Sr_0.2MnO₃/SBA-15催化剂,用XRD、BET、TG-DTG、XPS、H₂-TPR等手段对催化剂的物性结构等进行了表征,并在常压连续流动固定床反应器上评价了该催化剂对甲苯催化燃烧的催化性能。结果表明,逐层负载-孔道内氨/水蒸气原位羟化法的使用有助于活性组分La_0.8Sr_0.2MnO₃进入SBA-15的孔道,并在SBA-15上形成钙钛矿结构。La_0.8Sr_0.2MnO₃/SBA-15上钙钛矿结构的形成和晶格氧的出现,可为催化剂提供较多的活性中心,有利于其催化燃烧甲苯的活性。     

甲苯中微量金属元素测定及特征分析

利用乙醇-水-稀硝酸乳化体系分散溶解甲苯样品,建立了电感耦合等离子体质谱(ICP-MS)同时测定甲苯中V、Cr、Mn、Fe、 Co、Ni、Cu、Zn、Ag、Cd及Pb等微量金属元素的新方法。采用有机进样系统,以Re多元素混标为内标元素,优化了仪器射频功率、载气流速、采样深度等仪器参数,以及乙醇-水比例和硝酸含量等样品前处理条件。结果表明,在最佳实验条件下,甲苯中多数微量金属元素的检出限均可达 ng/L级,各元素的线性关系良好(线性系数r=0.998 4~1.000);方法精密度较高,相对标准偏差(RSD)不大于8.0%;准确度和重现性较好,相对误差不高于10%。对不同厂家的甲苯样品进行分析,结果发现不同厂家样品的Zn、Mn与Co元素差异较大。该方法能够对不同厂家来源的甲苯进行区分,从而为实现海洋泄漏污染工业苯系物的鉴别提供一种新的辅助分析方法。     

以水、甲苯及其混合溶剂超临界萃取煤的研究

在半连续萃取装置上,以水、甲苯及其混合物为溶剂对黄县褐煤进行了非等温超临界萃取,考察了不同溶剂对萃取过程的影响。结果表明,以甲苯为溶剂的萃取率高于以水为溶剂的。以水为溶剂萃取物中的沥青烯和预沥青烯的H/C原子比高于以甲苯为溶剂的,而O/C原子比则低。在水中加入适量甲苯,能够明显改善萃取效果,大幅度提高萃取率。     

Multiple quantum NMR spectra of toluene and p‐bromotoluene partially aligned in a nematic phase

¹H multiple quantum (MQ) NMR spectra of toluene and p‐bromotoluene, partially aligned in a liquid crystalline solvent, were acquired using gradient‐assisted methods. The MQ spectra were analysed to give the dipolar couplings (D_ij) and these were used to determine the molecular shape and average orientation of the of the spin systems. Copyright © 2003 John Wiley & Sons, Ltd.     

A nuclear magnetic resonance study of toluene-polyisobutylene solutions. 2. Vrentas-Duda theory

The self-diffusion coefficients of toluene in polyisobutylene have been analyzed using the Vrentas-Duda free volume diffusion model. The diffusion coefficients were determined at different temperatures and concentrations, using the pulsed field gradient nuclear magnetic resonance technique. The data were satisfactorily described by the model and the size of the polymer jumping unit was extracted. Comparisons were made with the Fujita free volume theory and the Fujita free volume parameters were extracted from the Vrentas-Duda free volume parameters. From the diffusion data that now available, it can be concluded that for most polymers the jumping unit is about 1.5 times the polymer monomer molecular weight. The activation energy of the toluene diffusion in polyisobutylene is compared with the activation energies of other penetrants in the same polymer. The diffusion data presented in this work show that the energy per mole required to overcome the attractive forces which constrain a diffusing species to its neighbors should be considered to be zero, in order to be able to extract the free volume parameters (from viscosity and diffusion data) with an acceptable uncertainty. ©1995 John Wiley & Sons, Inc.     

Seletivitätsbestimmung von Katalysatoren zur Toluolentalkylierung durch Einsatz von Toluol-14C-7

Die bei der katalytischen Toulolentalkylierung mögliche Konkurrenzreaktion der Spaltung des aromatischen Kernes führt zu unerwünschten Verlusten an Aromaten und kann infolge ihrer starken exothermen Wärmetönung bei der technischen Realisierung des Verfahrens Schwierigkeiten bei der thermischen Beherrschung des Reaktors bewirken. Bereits in der Entwicklungsphase des Katalysators ist man somit auf ein Verfahren angewiesen, das es erlaubt, diese Ringspaltung sicher nachzuweisen und quantitativ zu bestimmen.

In der vorliegenden Arbeit wird eine Tracermethode unter Einsatz von Toluol-¹⁴C-7 beschrieben, die diese Forderung weitgehendst erfüllt.     

改性纳米ZSM-11分子筛及其催化苯与甲醇烷基化反应的性能

采用先NaOH溶液碱处理后用柠檬酸溶液酸处理的方法对纳米ZSM-11分子筛进行改性.采用X射线衍射(XRD)、N_2吸附-脱附、扫描电镜(FE-SEM)、NH_3-TPD和热重(TG)等技术对改性前后的样品进行表征,将得到的催化剂应用于苯与甲醇烷基化制甲苯反应,结果表明:采用经改性处理的纳米ZSM-11分子筛催化剂,在反应温度为350℃,压力为0.2 MPa,质量空速(WHSV)为6 h~(-1),苯与甲醇进料摩尔比为1∶1的条件下,苯与甲醇烷基化反应产物中甲苯选择性明显提高,苯转化率达到44.7%,甲苯和二甲苯总选择性达到97.4%,其中甲苯选择性为86.5%,甲苯收率为37.8%.     

Structure of the 1:1 complex of dimethyl sulfoxide with hydroquinone: Supramolecular architecture based on D-H⋯A hydrogen bonds (D = O,C; A = O, π)

The hydroquinone-dimethyl sulfoxide-toluene system was investigated by thermal and X-ray diffraction analyses. The crystal structure of the 1:1 complex of hydroquinone with dimethyl sulfoxide was determined. Crystal data: C₈H₁₂O₃S, M = 188.24, triclinic system, space group P1¯, unit cell parameters: a = 7.4202(2) Å, b = 8.4046(3) Å, c = 8.7340(3) Å; α = 100.830(1)°, β = 99.794(1)°, γ = 114.129(1)°; V = 469.35(4) ų, Z = 2, d _calc = 1.332 g/cm³, R1 = 0.028, T = 100 K. The molecules are linked in a supramolecular assembly via D-H...A hydrogen bonds (D = O, C; A = O, π).     

Elucidating the Stereochemistry of Enzymatic Benzylsuccinate Synthesis with Chirally Labeled Toluene

Benzylsuccinate synthase is a glycyl radical enzyme that initiates anaerobic toluene metabolism by adding fumarate to the methyl group of toluene to yield (R)‐benzylsuccinate. To investigate whether the reaction occurs with retention or inversion of configuration at the methyl group of toluene, we synthesized both enantiomers of chiral toluene with all three H isotopes in their methyl groups. The chiral toluenes were converted into benzylsuccinates preferentially containing ²H and ³H at their benzylic C atoms, owing to a kinetic isotope effect favoring hydrogen abstraction from the methyl groups. The configuration of the products was analyzed by enzymatic CoA‐thioester synthesis and stereospecific oxidation using enzymes involved in benzylsuccinate degradation. Assessment of the configurations of the benzylsuccinate isomers based on loss or retention of tritium showed that inversion of configuration at the methyl group occurs when the chiral toluenes react with fumarate.