近红外光谱监测体外循环手术中脑组织氧合状况的研究

体外循环手术中,为防止因脑氧供需失衡导致脑缺氧,就要实时监测患者局部脑组织的氧合状况,以根据其变化调整生理参数或采取应急手段。用该研究小组自行研制的近红外仪器(使用一个双波长的近红外光源和两个近红外检测器)监测心脏手术中患者的脑氧,可以求出局部脑组织血红蛋白浓度的变化,并根据稳态空间分辨光谱(SRS)算法求出局部脑组织的氧饱和度(rSO₂)。体外循环中用监护仪监测患者的混合静脉血氧饱和度(SvO₂)等生理参数。测得的血红蛋白浓度变化容易受到干扰,而rSO₂的抗干扰性能较好。rSO₂在整个手术过程中都可以监测到,而SvO₂只能在体外循环过程中监测到。多数患者rSO₂和SvO₂存在正向相关性,但二者的相关系数并不很高。这是因为SvO₂是大静脉的血氧饱和度,而测得的rSO₂反映局部脑组织的氧合状况,二者的生理意义不同。实验结果表明,体外循环手术中rSO₂可以反映患者脑组织氧合状况的变化,而仅仅监测SvO₂是不够的。     

Isotope Zusammensetzung Der Mineralwässer Der Mongolei

Abstract

The isotopic composition (D, ¹⁸O, ⁸⁷Sr, ³He) of thermal and mineral waters of Mongolia is discussed. The Sr-isotope ratio depends on the rock's contact. Near the Chubsugul-lake ³He-/⁴He-values are high. A certain similarity between the waters of Mongolia and those of East Siberia can be derived from the obtained data.     

The Suitability and Usage of 18O and Chloride as Natural Tracers for Bank Filtrate at the Middle River Elbe

Abstract

Flow times and infiltration behaviour are very important for water extraction from riverbank filtration. Both the chloride content and the isotopic composition of oxygen (δ¹⁸O) were found to be suitable indicators for the conditions encountered in the middle course of the River Elbe near Torgau. The ranges for Elbe water were measured to be 20–43 mg Cl/l (1995-97) and -11 to -8.5‰ δ¹⁸O (1993-97). Both methods permitted flow-time spectra at two adjacent sampling profiles incorporating river and production wells to be obtained, indicating the preferred flow paths and the vertical extension of the riverbank filtrate plume in the aquifer. However, since the differences between the mean values for river water and regional groundwater were too small the percentage of river water abstracted from production wells could not be calculated.     

Analytical predictions of shapes of laminar diffusion flames in microgravity and earth gravity

Flame shape is an important observed characteristic of flames that can be used to scale flame properties such as heat release rates and radiation. Flame shape is affected by fuel type, oxygen levels in the oxidiser, inverse burning and gravity. The objective of this study is to understand the effect of high oxygen concentrations, inverse burning, and gravity on the predictions of flame shapes. Flame shapes are obtained from recent analytical models and compared with experimental data for a number of inverse and normal ethane flame configurations with varying oxygen concentrations in the oxidiser and under earth gravity and microgravity conditions. The Roper flame shape model was extended to predict the complete flame shapes of laminar gas jet normal and inverse diffusion flames on round burners. The Spalding model was extended to inverse diffusion flames. The results show that the extended Roper model results in reasonable predictions for all microgravity and earth gravity flames except for enhanced oxygen normal diffusion flames under earth gravity conditions. The results also show trends towards cooler flames in microgravity that are in line with past experimental observations. Some key characteristics of the predicted flame shapes and parameters needed to describe the flame shape using the extended Roper model are discussed.     

Analytic equation of state for solids with multi-exponential potential based on analytic mean field potential approach and applied to the epsilon phase of solid oxygen

The thermodynamic properties of the ε phase of solid oxygen are studied by using the analytic mean field approach （AMFP）. Analytic expressions for the Helmholtz free energy, internal energy and equation of state of solid oxygen have been derived based on the multi-exponential potential. The formulism for the case of double-exponential （DE） model is applied to the ε phase of solid oxygen. Its four potential parameters are determined through fitting the experimental compression data of the ε phase of solid oxygen. Numerical results of the pressure dependence of the volume calculated by using the AMFP are in good agreement with the original experimental data. This suggests that the AMFP is a useful approach to study the thermodynamic properties of the ε phase of solid oxygen. Furthermore, we predict the variation of the volume, lattice parameters and intermolecular distances with pressure, and some thermodynamic quantities versus volume, at several higher temperatures.     

基于实时Linux的极向场电源主控制系统的设计

为了满足极向场电源控制系统严苛的实时响应的要求,选择实时Linux系统作为系统平台,采用一个开放源代码的、基于C/C++的Eclipse可扩展的开发平台作为开发工具,完成极向场电源主控制系统的设计,实现了在一个控制周期内(1ms)对极向场电源系统的12套本地控制器的实时通信和实时控制。对极向场电源主控制系统的高速通信和实时控制、稳定可靠等关键问题给出了可行的实践性的解决方法。经实验测试,该设计运行稳定,能满足极向场电源控制系统的实时需求。     

兰州重离子加速器控制系统DSP组件设计

针对重离子加速器部分电源的控制要求,进行了分析研究,提出并实现了一种实时、高效、多功能的控制系统。该系统基于数字信号处理器（DSP）和两片现场可编程门阵列（FPGA）芯片相结合的核心处理构架,在系统后端利用PXI总线接口配合FPGA来与工控机箱中的系统控制器和其他控制组件进行大批量数据交互;系统前端利用直接数字频率合成器、模数转换器和数模转换器等器件结合DSP和FPGA中的控制算法及相应控制机制来实现对不同电源控制参数的处理和功率的输出;平台中两组光纤模块也与FPGA相配合实现对同步触发事例等实时数据的收发和调试。     

基于氧气A吸收带的baseline拟合距离反演算法

目标红外被动测距的实现同气体及其波段的选取密切相关。氧气A吸收带具有独特的谱线结构,对于火箭羽流或者高温辐射体的距离探测,氧气A吸收带是最佳的距离反演通道。利用该特点,详细研究了逐线积分算法(LBLRTM),并设计了氧气A带吸收系数及标准光谱计算软件;利用A吸收带吸收光谱带外数据,采用多项式拟合方法,实现基线(baseline)拟合,进而得到带平均透过率;在不同的距离条件下,将两种带平均透过率进行对比,误差在1.9%左右,拟合精度较高,该方法为后续距离的精确反演提供了理论依据。     

高氧空位浓度对金红石TiO2导电性能影响的第一性原理研究

采用基于密度泛函理论的平面波超软赝势方法研究了 纯的和不同高氧空位浓度金红石型TiO_2-x (x=0, 0.083, 0.125, 0.167, 0.25)超胞的能带结构分布、态密度分布.同时, 采用局域密度近似+U方法调准了带隙.结果表明, 高氧空位浓度越高, 金红石型TiO₂的最小带隙越变窄、电子有效质量越减小, 自由电子浓度越高, 电子迁移率越低、电导率越低.计算结果与实验结果的变化趋势相符合. 关键词： 高氧空位 2')" href="#">金红石型TiO₂ 电导率 第一性原理     

基于简单碰撞理论煤粉燃烧动力学模型的研究-PART Ⅲ:氧气可达比表面积

根据不同温度下氧分子平均自由程的大小,比较了小孔、中孔和大孔中三种扩散速率与煤焦表面燃烧速度的大小.研究表明2000 K以内,颗粒表面分子扩散速率比氧化反应速率大1个数量级以上,过度扩散速率不小于氧化速率.温度小于1200K时,燃烧速率比Knudsen扩散速率小1～5个数量级,扩散孔径小于15～28 nm,反应主要在内外表面进行;1200～1600K时,燃烧速率与Knudsen扩散速率相当,扩散临界孔径28～38 nm,反应在外表面及浅层内表面进行;温度1600K以上时,Knudsen扩散速率比燃烧速率小1个数量级,孔径38～50 nm以下内表面上碳的氧化速度受扩散控制.煤焦的氧化主要发生在Knudsen扩散临界孔径10～50 nm以上的氧气可达表面上.