Synthesis of silk-like FeS2/NiS2 hybrid nanocrystals with improved reversible oxygen catalytic performance in a Zn-air battery

The development of highly active and stable reversible oxygen electrocatalysts is crucial for improving the efficiency of metal-air battery devices. Herein, an efficient liquid exfoliation strategy was designed for producing silk-like FeS₂/NiS₂ hybrid nanocrystals with enhanced reversible oxygen catalytic performance that displayed excellent properties for Zn-air batteries. Because of the unique silk-like morphology and interface nanocrystal structure, they can catalyze the oxygen evolution reaction (OER) efficiently with a low overpotential of 233 mV at j = 10 mA cm^?2. This is an improvement from the recently reported catalysts in 1.0 M KOH. Meanwhile, the oxygen reduction reaction (ORR) activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals showed an onset potential of 911 mV and a half-wave potential of 640 mV. In addition, the reversible oxygen electrode activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals was calculated to be 0.823 V, based on the potential of the OER and ORR. Further, the homemade rechargeable Zn-air batteries using FeS₂/NiS₂ hybrid nanocrystals as the air-cathode displayed a high open-circuit voltage of 1.25 V for more than 17 h and an excellent rechargeable performance for 25 h. The solid Zn-air batteries exhibited an excellent rechargeable performance for 15 h. This study provided a new method for designing interface nanocrystals with a unique morphology for efficient multifunctional electrocatalysts in electrochemical reactions and renewable energy devices.     

Kinetic studies of nickel speciation in model solutions of a well-characterized humic acid using the competing ligand exchange method

Publications on the binding characteristics of metals with humic acid (HA) are sparse. Here we investigated the release of nickel from Ni(II)-HA complexes using model solutions of three different [Ni(II)]/[HA] mole ratios at three different pH values; we also compared the results with those of [Ni(II)]/[FA] complexes from previous work in this laboratory. Ligand exchange kinetics using the competing ligand exchange method (CLEM) were studied using two different techniques: graphite furnace atomic absorption spectrometry (GFAAS) with Chelex 100 resin as the competing ligand, and adsorptive cathodic stripping voltammetry (AdCSV) with dimethylglyoxime as the competing ligand to measure the rate of dissociation of Ni(II)-HA complexes. The results of the kinetic studies showed that as the [Ni(II)]/[HA] mole ratio was decreased, the rate of dissociation of Ni(II)-HA complexes decreased, and the proportion of free Ni²⁺ ions plus very labile nickel complexes decreased while the proportion of the less labile kinetically distinguishable components increased. Generally, the rate of dissociation of Ni(II)-HA complexes was slower than that of Ni(II)-FA complexes. Studies on the validity of the kinetic model showed that the concentrations of chemical species varied in a reasonable way with pH and the [Ni(II)]/[HA] mole ratios, indicating that the kinetically distinguishable components have chemical significance and the kinetic model is valid.     

Overproduction of riboflavin by anArthrobacter sp. mutant resistant to 5-fluorouracil

Effects of pH and dissolved oxygen concentration on batchwise riboflavin production by a 5-fluorouracil (5-FU)-resistant mutant ofArthrobacter sp. were investigated. The reaction was carried out in a jar fermentor. The optimal pH of culture medium was around 7.3. Dissolved oxygen concentration was almost constant during fermentation at 600 rpm of agitation rate. Production of riboflavin reached a maximum of 160 mg/L after 70 h fermentation under the agitation rate of 600 rpm, aeration rate of 1.0 L/min, and pH 7.0.     

Structure and properties of nonclassical polymers

Utilizing an extended Hubbard-type Hamiltonian which incorporates both nearest-neighbour Coulomb repulsion and exchange interactions, we have studied the energy dispersion of the lowest elementary excitation from the ferromagnetically aligned state of quasi one-dimensional alternant hydrocarbon networks. It was found that the main effect of the long range Coulomb interaction may be thought of as a renormalization (screening) of the on-site Hubbard integral. This implies an enhancement of the kinetic exchange term and impairs the stability of the ferromagnetic state towards single spin inversions. However, for physically relevant values of the parameters entering the model Hamiltonian, the collective spin excitation represents a magnon, whose energy band lies above the reference value pertaining to the magnetically saturated configuration.Dedicated to Prof. Dr. Adolf Neckel on the occasion of his 60th birthday     

Exact electronic properties in the classically forbidden region of a metal surface

We derive exact properties of the inhomogeneous electron gas in the asymptotic classically forbidden region at a metal–vacuum interface within the framework of local effective potential energy theory. We derive a new expression for the asymptotic structure of the Kohn–Sham density functional theory (KS‐DFT) exchange‐correlation potential energy v_xc(r) in terms of the irreducible electron self‐energy. We also derive the exact asymptotic structure of the orbitals, density, the Dirac density matrix, the kinetic energy density, and KS exchange energy density. We further obtain the exact expression for the Fermi hole and demonstrate its structure in this asymptotic limit. The exchange‐correlation potential energy is derived to be v_xc(z → ∞) = ?α_KS,xc/z, and its exchange and correlation components to be v_x(z → ∞) = ?α_KS,x/z and v_c(z → ∞) = ?α_KS,c/z, respectively. The analytical expressions for the coefficients α_KS,xc and α_KS,x show them to be dependent on the bulk‐metal Wigner–Seitz radius and the barrier height at the surface. The coefficient α_KS,c = 1/4 is determined in the plasmon‐pole approximation and is independent of these metal parameters. Thus, the asymptotic structure of v_xc(z) in the vacuum region is image‐potential‐like but not the commonly accepted one of ?1/4z. Furthermore, this structure depends on the properties of the metal. Additionally, an analysis of these results via quantal density functional theory (Q‐DFT) shows that both the Pauli W_x(z → ∞) and lowest‐order correlation‐kinetic W(z → ∞) components of the exchange potential energy v_x(z → ∞), and the Coulomb W_c(z → ∞) and higher‐order correlation‐kinetic components of the correlation potential energy v_c(z → ∞), all contribute terms of O(1/z) to the structure. Hence correlations attributable to the Pauli exclusion principle, Coulomb repulsion, and correlation‐kinetic effects all contribute to the asymptotic structure of the effective potential energy at a metal surface. The relevance of the results derived to the theory of image states and to KS‐DFT is also discussed. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Kinetic model of a DC oxygen glow discharge

A simple kinetic model predicting the concentration of oxygen atoms, metastable singlet molecules O₂(a ¹) and negative ions O — in the positive column of a DC glow discharge is developed. The calculated O and O₂(a ¹) concentrations are compared to previously reported measurements for pressuresp=0.2–2 Torr and discharge currentsI=10–80 mA. The electron density calculated from the continuity equationj=n _e e v _d agrees well with experiment. The rate coefficients for electron impact processes used in the balance equations of O, O₂(a ¹), and O^– were taken from the literature as a function of the reduced electric fieldE/N forE/N=40–80 Td. A reasonable agreement is obtained between the model and the experiment with a set of 10 reactions for the production and destruction of the above-mentioned species     

Flow injection system with in-line Winkler's procedure using 16-way valve and spectrofluorimetric determination of dissolved oxygen in environmental waters

Flow injection spectrofluorimetry with in-line Winklers procedure was developed for the dissolved oxygen (DO) determination. 2-Thionaphthol reacted with iodine produced by Winkler’s method to form fluorescence inactive disulfide compound. To automate the process completely, a 5-channel flow system with a newly designed 16-way valve was assembled. The system consisted of a dispersion coil (DC), a precipitate formation coil (PFC), a precipitate dissolving coil (PDC), and extraction coil (EC). A calibration can be constructed by using a standard iodine solution for dissolved oxygen. The calibration graph was linear over the range 1.2×10⁻⁴∼6.0×10⁻⁴ mol l⁻¹ iodine (1.96∼9.80 mg O l⁻¹)). The relative standard deviation (n=6) was below 0.3% for the 4×10⁻⁴ mol l⁻¹ iodine (6.27 mg O l⁻¹) determination. The sample throughput was 12/h.     

V-Ag-Ni系氧化物的表面氧性质与甲苯选择性氧化的催化性能

制备了一系列Ｖ，Ａｇ，Ｎｉ原子比不同的三元氧化物，应用ＴＰＤ－ＭＳ技术研究了样品表面氧的性质，并测定了甲苯选择性氧化生成苯甲醛的催化活性。实验结果表明，样品表面存在有多种吸附的氧物种。在脱附温度＜９００℃：当Ｎｉ含量对Ａｇ（或Ｖ）的原子比为０．２５或０．５０时，仅在低温处出现有表面的Ｏ＾－和Ｏ＾２＾－两种氧物种的脱附峰；当Ｎｉ含量对Ａｇ（或Ｖ）的原子比增高到＞０．７５时，除有表面的Ｏ＾－和Ｏ＾２＾     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

A High Sensitivity Detection Method of Singlet Oxygen and Superoxide Anion

This paper, for the first time, reports a method that can be used as a highly sensitive probe for singlet oxygen (^1O2) and superoxide anion (O2^-) in vitro or in vivo. FCLA(3,7-dihydro-6-{4-[2-(N‘-(5-fluoresceinyl)thioureido)ethoxy]phenyl}-2-methylimidazo{1,2-a}pyrazin-3-one sodium salt), a chemiluminescence (CL) analysis reagent, has been reported to sensitively react with ^1O2 and O2^- to emit photons with a spectral peak of 525nm. In this work,when human serum albumin (HSA) was added into FCLA solution to enhance the CL intensity,approximately 20 times, compared to that without HSA. The enhanced CL had the same 525 nm spectral peak, identical to that without HSA. By gradually reducing the molecular oxygen content in the solution, we find that the auto-oxidation of oxygen molecules dissolved in the solution plays an important role in the CL process. Based on these experimental evidences, we propose a novel and highly sensitive detection method of ^1O2 and O2^- which may have a great potential in chemical and medical applications.