ZrO2对Mn—O／γ—Al2O3催化剂中表面氧性能的影响

用ＴＰＤ－ＭＳ和ＴＰＲ技术研究了Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３和Ｍｎ－Ｏ／ＺｒＯ＋γ－Ａｌ２Ｏ３催化剂中表面氧的脱附、还原性能和再生氧化恢复性能，并用ＸＲＤ对催化剂的固相结构进行了表征。结果表明，Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３或Ｍｎ－Ｏ／ＺｒＯ２＋γ－Ａｌ２Ｏ３催化剂上存在ＭｎＯ２、Ｍｎ２Ｏ３和少量Ｍｎ３Ｏ４物种。ＺｒＯ２的存在不影响Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３的ＴＰＲ的ＴＰＤ的特征峰，但使ＭｎＯ２的量明显增加，     

Matrix separation of palladium and iridium by the cellulose anion exchanger Cellex T and the subsequent determination of palladium at theμg/g-level

The preconcentration and separation of palladium and iridium from base metals is studied with cellulose (Cellex T) and styrene-divinylbenzene (Varion AT 400) anion exchangers. In spite of lower capacity of Cellex T to chloride complexes of Pd and Ir, it allowed to get a higher preconcentration factor. Yields of 92–99% are achieved for Pd and 96–97% for Ir from the solutions containing great excess of base and heavy metals. Graphite furnace atomic absorption spectrometry is used for the final measurements. The procedure has been applied to the determination of palladium in natural samples.     

The furan approach to oxacycles. Part 5: Synthesis of a chiral butenolide, building block towards biologically interesting natural products

We describe an efficient new approach for the synthesis of a chiral butenolide that is based on the oxidation of a chiral furan ring with singlet oxygen in the presence of Hünig’s base, followed by Luche reduction and in situ lactonization.     

Electrophysical properties of titanates of alkaline-earth metals

Results on oxygen-ion, electron, and proton conduction and oxygen penetrability of titanates of alkaline-earth metals doped with acceptor admixtures are briefly reviewed. The applicability of these materials in electrochemical devices, in particular, as oxygen-penetrable membranes, is considered. The focus is on the studies carried out at the Institute of High-Temperature Electrochemistry, Ural Branch, Russian Academy of Sciences.     

一例可分离的双核铁氢自由基阳离子

成功分离得到了一例双核铁氢自由基阳离子盐cis-[Fe₂Cp₂（μ-H）（μ-PPh₂）（CO）₂]^·+[Al（OC（CF₃）₃）₄]^-（cis-1^·+[Al（OC（CF₃）₃）₄]^-）晶体，并使用单晶X射线衍射、电子顺磁共振、红外光谱、紫外-可见光谱以及密度泛函理论对它进行了表征和理论计算。电子顺磁共振和密度泛函理论计算分析表明，自由基的自旋密度主要均等分布于2个铁原子上。     

固体电解质La2-xCaxMo1.7W0.3O9-δ(0≤x≤0.2)的合成、表征及电性能

在氧离子导体La₂Mo_1.7W_0.3O₉的基础上，采用固相法合成了La位掺杂的Ca系列新型氧化物La_2-xCa_xMo_1.7W_0.3O_9-δ(0≤x≤0.2)。通过XRD、Raman和XPS等手段对化合物结构进行表征，交流阻抗谱测试其电性能。结果表明：掺杂离子Ca²⁺的半径小于基质离子La³⁺的半径导致晶格收缩；Ca的掺杂在La₂Mo_1.7W_0.3O₉自身内置氧空位的基础上增加了额外的氧空位，提高了氧离子导体的电导率，550 ℃电导率由0.79 × 10^-4 S·cm^-1 (x=0.0)增加到1.5 × 10^-4 S·cm^-1 (x=0.16，0.2)，电导率增加89.9%。     

蒙旦树脂化学组成的研究

采用阴离子交换色谱和硅胶－氧化铝柱色谱对云南寻甸蒙旦树脂（ＸＤＳＺ）、潦浒蒙旦树脂（ＬＨＳＺ）、昭通蒙旦树脂（ＺＴＳＺ）和吉林舒兰蒙旦树脂（ＳＬＳＺ）进行了族组分的分离。树脂游离酸，树脂结合酸，树脂烃和树脂醇在各树脂中的百分含量分别为ＸＤＳＺ１１．８６，８．７６，１２．３０，４５．９９；ＬＨＳＺ１５．８９，１３．９１，４．９０，４５．９９；ＳＬＳＺ２５．４６，８．０７，１７．４０，３６．２２；ＺＴ     

Strukturen ladungsgestörter oder räumlich überfüllter Moleküle. 15. Tetracyanethen-Natrium-Dimethoxyethan

Structures of Charge-Perturbed or Sterically Overcrowded Molecules. 16. Tetracyanoethylene Sodium Dimethoxyethane The Single crystal structure of [(NC)₂C? C(CN)₂?·Na⊕(H₃CO? CH₂CH₂? OCH₃)]∞ reveals two formula units within the triclinic (P1 ) unit cell. The tetracyanoethylene radical anions are arranged along parallel double layers, which are shifted relative to each other, and in between which are interspersed the sodium counter cations and their dimethoxyethane ligands. The distances within the double layers amount to 300 pm and the ones between them to 385 pm. The six-fold coordinated Na⊕ centers are surrounded by four radical anions with contact distances Na…?N between 250 and 254 pm as well as by a twofold solvent ligand with Na…?O of 238 and 241 pm. Due to the electron transfer to the acceptor molecule, its (NC)₂C-halves twist by 8° and the bond lengths of the N?C? C subunits, bent by each 3°, are shortened up to 2 pm. The structural parameters are compared to those of the analogous potassium salt [TCNE^?K^⊕DME], of the dianion , of the sodium salts [(NC)₃C^?Na^⊕]∞ as well as [(NC)₂C? C(CHCH)₂? C(CN)₂^?Na^⊕]_∞ and, in addition, are discussed based on geometry-optimized MNDO calculations.     

Hydrothermal Synthesis, Crystal Structure, and Characterization of a Novel Terbium（Ⅲ） Coordination Polymer Bridged by 5-Sulfoisophthalate Trivalent Anions

Introduction Recently, several efforts have been made for thestudy of coordination polymers assembled from lantha-nide ions and aromatic polycarboxylate ligands becauseof their intriguing structural diversity and potentialapplications in several fields, s…     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.