A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

Forms of vibrations and structural changes in liquid state

Summary The forms of vibrations and displacements of particles in amorphous structures have been investigated. The particles, moving on highly non-linear amplitude, are responsible for the creation of disordered structures of amorphous bodies. The non-linear oscillators, even if 'few' in concentration, are characterized by unpredictable trajectories in phase space. The non-linear oscillators are fully developed in the liquid state above the crossover temperature T_cr and between T_cr and T_g their number decreases. Under T_g they completely disappear. The interconnection between the linear oscillators in blocks plays the most important role in the characteristic time spectra in liquid state. Using the additive properties of elements polarizibilities, the number of acoustical units in individual blocks at T_cr is estimated to be about 600 units. The diameter of blocks at T_cr was estimated to be about 1.8 nm. Even if the non-linear high amplitude motions disappear at solidification, the remnants of structural irregularity remain and the disordered structure of glass is formed.     

新型陶瓷材料的光激励发光性质研究

针对以往电子俘获光存储材料存在的问题，利用高温固相反应发制备了一种Eu^2 掺杂的氟氧化物玻璃陶瓷，研究表明在该材料中具有光激励发光(PSL)特性，并可用于电子俘获光存储。XRD分析表明该材料含有大量的BaF2微晶。根据其与BaF2相似的发光特性，推断玻璃陶瓷的PSL有可能来源于微晶中Eu^2 的5d-4f发射。但是决定光激励发光过程中的电子(空穴)陷阱的存在方式、电子迁移途径都有待进一步探讨的问题。与传统的BaFCl：Eu相比，这种材料的光激励发光衰减速度较慢。     

Adsorption of polyamides and polyamide–silane mixtures at glass surfaces

The individual and combined adsorption behavior of polyamides and two different silanes to multicomponent glass surfaces was probed with a combination of x‐ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and static contact angle measurements. Samples were analyzed with and without solvent rinsing to separate the weakly bound (physisorbed) and more strongly bound (chemisorbed) species. High‐resolution XPS on N 1s revealed that the polyamides adsorb to the glass surfaces via protonated amine species at the acidic (OH) sites on the glass surface. Angle‐resolved XPS confirmed this by showing that the alkyl portion of the polymer is oriented away from the glass interface. In competitive coadsorption studies it was found that amino‐terminated silanes preferentially adsorb to the glass surface, relegating the polyamide to a physisorbed outer layer. When mercaptoterminated silanes were competitively coadsorbed the polyamide was preferentially adsorbed even when present at a concentration twenty times less than that of the silane. Altogether, this work reveals the strong interaction between surface silanols and amino‐functionalized organics. Copyright © 2003 John Wiley & Sons, Ltd.     

Structure inhomogeneities of medium-range order in fluorozirconate glasses

Images of cleaved surfaces were obtained for 53ZrF₄-20BaF₂-4LaF₃-3AlF₃-20NaF (ZBLAN) glasses and fused quartz using an NTMDT atomic force microscope. It is shown that the scatter of particle size depends on the cooling rate and is 21–48.5 Å for the cleaved surface of ZBLAN glass obtained by very fast cooling and 68–172 Å for the cleaved surface of ZBLAN after slow cooling. For cleaved fused quartz, the range is 25-18 Å.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

Effect of film thickness and supercooling on the performance of cholesteryl cinnamate liquid crystal capillary columns

Improved separations of the isomers of olefinic aliphatic insect pheromones were obtained on cholesteryl cinnamate glass capillary columns by operating in the supercooled temperature range of the liquid crystal. Capillary columns were prepared with varying film thickness of the stationary phase; choice of the correct film thickness ensured optimum retention for a wide range of compounds within the most effective temperature range of the liquid crystal. The deactivation procedures described made the liquid crystal columns suitable for separation of the geometric isomers of polar and nonpolar compounds.     

Structure and Magnetic Properties of Nickel–Zinc Ferrite Nanoparticles Prepared by Glass Crystallization Method

Summary. The magnetic and microstructure properties of Fe₂O₃–0.4NiO–0.6ZnO–B₂O₃ glass system, which was subjected to heat treatment in order to induce a magnetic crystalline phase (Ni_0.4Zn_0.6-Fe₂O₄ crystals) within the glass matrix, were investigated. DSC measurement was performed to reveal the crystallization temperature of the prepared glass sample. The obtained samples, produced by heat treatment at 765°C for various times (1, 1.5, 2, and 3 h), were characterized by X-ray diffraction, IR spectra, transmission electron microscopy, and vibrating sample magnetometer. The results indicated the formation of spinel Ni–Zn ferrite in the glass matrix. Particles of the ferrite with sizes ranging from 28 to 120 nm depending on the sintering time were observed. The coercivity values for different heat-treatment samples were found to be in the range from 15.2 to 100 Oe. The combination of zinc content and sintering times leads to samples with saturation magnetization ranging from 12.25 to 17.82 emu/g.     

Preparation and properties of rare-earth containing oxide fluoride glasses

The preparation of the rare earth containing oxide fluoride glasses LnF₃ (Ln; Y through Lu)-BaF₂-AlF₃-GeO₂ in which the nominal content of LnF₃ reached 60 mol% in maximum and their basic properties such as density, refractive index and glass transition temperature were investigated and summarized in detail. Especially, in order to discuss the local structure around the rare earth ion in the glass, the Judd-Ofelt analysis (discussion with Ω parameters) of the HoF₃-BaF₂-AlF₃-GeO₂ glasses was carried out. The unique fluorescent behavior and the magnetic properties of LnF₃-BaF₂-AlF₃-GeO₂ glasses (Ln = Tb and/or Sm) were also studied.     

Miniaturization of separation techniques using planar chip technology

Miniaturization of separation columns implies equally reduced vol- umes of injectors, detectors, and the connecting channels. Planar chip technology provides a powerful means for the fabrication of micron-sized structures such as channels. This is demonstrated by two examples. An optical absorbance detector chip exhibits the expected behavior of a 1 mm optical path length cell despite its volume of 1 nL. A capillary electrophoresis device allows integrated injections of 100 pL samples, efficiencies of 70,000 to 160,000 theoretical plates in 10 to 20 seconds, and external laser-induced fluorescence detection at any capillary length of choice between 5 and 50 mm.