Method for determination of methyl tert-butyl ether in gasoline by gas chromatography

A simple method for the determination of methyl tert-butyl ether (MTBE) in gasoline has been developed. The separation of MTBE from other analytes was controlled by the use of gas chromatography–mass spectrometry in the full scan mode using the characteristic primary, secondary and tertiary ions m/z 73, 57 and 43. The sample mass spectrum did not show any superimposition of other analytes. The separation from the common gasoline component 2-methylpentane was sufficient for reliable quantitation. An application of the developed conditions using gas chromatography with flame ionization detection was performed by the analysis of regular, euro super, super premium unleaded and ‘Optimax’ gasoline from petrol stations in the area of Frankfurt/Main, Germany. Regular unleaded gasoline shows an average MTBE content of 0.4% (w/w), whereas the MTBE content in euro super gasoline varies between 0.4 and 4.2% (w/w). The blending of MTBE to super premium has increased from 8.2% (w/w) in 1998 to 9.8% (w/w) on average in 1999. The recently introduced gasoline ‘Optimax’ shows an average MTBE content of 11.9% (w/w). The presented method might also be used for the analysis of other ethers, such as ethyl tert-butyl ether, which requires the use of another internal standard.     

不同热交联气氛对含氟聚芳醚近红外光学吸收的影响

光波导材料对于光通信及光互联产业的发展起着至关重要的作用,例如可用来制作波分复用系统中的光衰减器,热光开关,阵列波导光栅复用／解复用器,光滤波器等．聚合物材料由于其容易加工,与无机材料相比有相对较低的制作成本,而从众多光波导材料中脱颖而出．目前光通讯材料与器件的研究应用主要集中在1．3和1．55μm两个波长上,然而随着波分复用(WDM)技术的发展,     

新型含磷双酚A型共聚醚醚酮的合成与性能

新型含磷双酚A型共聚醚醚酮的合成与性能;溶液缩聚;含磷单体     

甲基取代的新型聚醚醚酮及其共聚物的合成、表征和性能研究

设计合成了一种甲基侧基取代的可溶性聚芳醚酮均聚物PETMDEK,同时合成了一系列不同比例的无规共聚物PETMDEK-PEDEK,考察了共聚组成对聚合物性能的影响.随着共聚物中可溶性PETMDEK组分的不断增加,其聚集态结构也发生变化,出现从结晶→液晶→结晶→无定形固体的转变,同时溶解性也由可溶向不溶转变.本文还侧重研究了PETMDEK组分摩尔分数为20%的无规共聚物的热致液晶行为.     

Cation-crown ether complex formation in water. II. Alkali and alkaline earth cations and 12-crown-4, 15-crown-5, and 18-crown-6

The stability constants and the partial molal volume and isentropic partial molal compressibility changes of complex formation between cations and crown ethers in water at 25°C are presented. The cations involved are Na⁺, K⁺, Rb⁺, Cs⁺, Ca²⁺, and Ba²⁺, and the crown ethers are 12-crown-4, 15-crown-5, and 18-crown-6. Values of V of complex formation have been discussed in terms of two simple models, one based on the scaled particle theory, and the others on the Drude-Nernst continuum model. The results indicate that the charge of the potassium cation in 18-crown-6 is especially well screened from the water. On this basis hydration numbers of complexed cations have been calculated. This shows that the size of the cation compared to the crown ether hole is important for the contacts between complexed cations and water.     

Solid state extrusion of thermoplastic elastomers 4

A solid state extrusion technique is applied as to produce oriented block copoly(ether ester) under various physical conditions. The morphology of the extruded samples is characterized in relation to the extrusion parameters and hard segment compositions of the polymer, using thermal analysis and X-ray methods. The lateral dimensions of the crystalline domains are found to be approximately 150 Å depending on the extrusion conditions. The statistics of the long range periodicity of the structure along the extrusion direction is in agreement with a one-dimensional two phase model, the crystalline portion of which does not vary much in thickness (35 – 45 Å). The unexpected increase in the long period and the thermal shrinkage suggest the existence of strained interlamellar amorphous chains (tie molecules). The observed variations in tensile properties are interpreted under the assumption that both the number of such tie molecules and their fully extended lengths are determined by the hard segment composition and the extrusion conditions. It is also argued that the increase in the glass transition temperature is not only a function of the composition of hard segments in the amorphous phase but also of the number of strained tie molecules.Herrn Dr. Dr. h. c. H. Hellmann zum 70. Geburtstag gewidmet.Part 3 cf. lit [11]     

From crown ethers to zeolites: Reaction of EtAlCl2 with crown ethers

In contrast to aluminum alkyls, alkyl aluminum halides such as EtAlCl₂ react with crown ethers to form cation-anion pairs which exhibit the liquid clathrate effect. Specifically, [12-C-4·AlCl₂][AlCl₃Et] and [18-C-6·AlCl₂][AlCl₃Et] have been isolated and characterized by X-ray diffraction techniques. The cations show aluminum in an octahedral environment made up of four of the oxygen atoms from the crown and two chlorine atoms. The 12-C-4 derivative crystallizes in the monoclinic space group P2₁/c with cell constants of a=7.497(4), b=22.121(8), c=12.339(5) Å, =94.99(3)^o, and Z=4 for =1.43 g cm^–3. Least-squares refinement based on 1413 observed reflections led to a final conventional R value of 0.093. The 18-C-6 complex belongs to the triclinic space group P1 with a=8.414(4), b=12.193(6), c=12.394(6) Å, =73.14(4), =86.07(4), =81.52(4)^o, and Z=2 for =1.45 g cm^–3. Refinement based on 2605 observed reflections led to R=0.063. The complex aluminum-containing species are related to a class of compounds called aluminoxanes.     

王冠高聚物担载四核钴羰基簇催化剂的醛化反应活性

本文用二苯并-18-冠-6高聚物作因相化载体,通过化学健合,合成了担载的四核钴羰基簇催化剂Crown-Co_4。,并对该催化剂进行了元素分析、红外光谱及X射线光电子能谱(XPS)等方面的测试分析;还考察了不同温度、不同极性溶剂及不同类型烯烃对醛化活性的影响。实验证明,该催化剂对直链端位烯烃的醛化活性高于均相的苯基-四核钴羰基簇催化利Ph-Co_4。。二苯并-18-冠-6高聚物载体能明显改善催化性能。     

冠醚B15C5萃取分离锂同位素的阴离子效应

本文研究了B15C5冠醚萃取锂盐时,不同阴离子对体系的同位素分离效应的影响。结果表明,阴离子在冠醚萃取过程中不仅对萃取络合物的稳定性有显著影响,而且阴离子半径及软度越大时,萃取体系的锂同位素分离系数(α_(LI))也越大。