Carob pod: A new substrate for citric acid production by Aspergillus niger

The production of citric acid from carob pod extract byA. niger in surface fermentation was investigated. A maximum citric acid concentration (85.5 g/L), citric acid productivity (4.07 g/L/d), specific citric acid production rate (0.18 g/g/d), and specific sugar uptake rate (0.358 g/g/d) was achieved at an initial sugar concentration of 200 g/L, pH of 6.5, and a temperature of 30°C. Other kinetic parameters, namely, citric acid yield, biomass yield, specific biomass production rate, and fermentation efficiency were maximum at pH 6.5, temperature 30°C, and initial sugar concentration 100 g/L. The external addition of methanol into the carob pod extract at a concentration up to 4% (v/v) improved the production of citric acid.     

TG and DSC investigation of the dehydration of the extra large pore aluminophosphate molecular sieve VPI-5 and related materials

The dehydration of a series of VPI-5 and H3 samples, synthesized under various conditions, as well as the solid state transformation of VPI-5 to AlPO₄-8 have been investigated using combined TG-DTG-DSC and high-resolution solid state³¹P-NMR. The TG curves show a quasi-continuous release of water, the total loss being characteristic for each sample. Complete dehydration is achieved when the samples are heated from 20°C to about 150°C at various beating rates. Besides the main dehydration effect, several weak endothermic peaks are observed. These generally non-reproducible modulated peaks, recorded at high heating rates, are presumably due to the interactions of the water molecules leaving the channels of VPI-5 with the randomly positioned fragments stemming from the destruction of the water triple helix assemblage. The non-isothermal kinetic parameters of the dehydration have been evaluated from the TG and DTG curves recorded at low heating rates. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Enantioselective oxidation of olefins catalyzed by chiral copper bis(oxazolinyl)pyridine complexes: a reassessment

Copper complexes of chiral tridentate pybox ligands synthesized using a modified procedure have been studied as catalysts for the enantioselective allylic oxidation of olefins. A variety of olefins have been used in this reaction. Using 5 mol% of a Cu(II) complex of the tridentate pybox ligand, phenylhydrazine, and tert-butyl perbenzoate as oxidant in acetone, optically active allylic benzoates were obtained up to 94% ee in few hours. It was also observed that the use of molecular sieves in the reaction did not alter the enantioselectivity. Temperature was found to be very crucial in rate of the enantioselective allylic oxidation of olefins. Using EPR spectra, it has been shown that the Cu(II) species is reduced to Cu(I) by phenylhydrazine and phenylhydrazone, but the reduction with the former is faster in comparison to the latter. It was concluded that the rate enhancement was not specific to the presence of phenylhydrazine or phenylhydrazone, but both were equally responsible provided acetone was used as a solvent.     

Non-isothermal thermokinetic of cement hardening

Thermokinetic analysis of cements hydration under nonisothermal conditions was performed. The influence of the application moment, intensity and duration of heat effect on the velocity and completeness of the character of hydration was estimated.     

Physico-chemical aspects of polyethylene processing in an open mixer. Part 23: Mechanisms and kinetics of trans-vinylene group consumption

There are many potential reactions for trans-vinylene groups in oxidizing polyethylene melts. The main possibilities are reactions with peroxy radicals, molecular oxygen, hydroperoxides and peracids. These different reactions can all contribute to the removal of trans-vinylene groups to some extent. This is especially so, for the reactions with hydroperoxides that have been found to be the dominant reactions with vinylidene and vinyl groups in the low temperature range. The reaction with peroxy radicals is thought to be as important relatively as with vinylidene groups. Therefore, the importance of the reaction is decreasing with increasing temperature. However, the most characteristic reaction for trans-vinylene groups can be detected without any doubt only in the advanced stages of processing. It is mechanical stress induced oxygen addition to the double bond. The discussion shows that the reaction should be important from the beginning of processing. The reaction cannot operate with vinyl and vinylidene groups, which are not part of the polyethylene main chain. After oxygen addition to the trans-vinylene group, the “ene” reaction yields an allylic hydroperoxide so that the double bond is not immediately removed. It is acid catalyzed hydroperoxide decomposition that leads to chain scission with aldehyde formation at the new chain ends.     

Use of Ag(II) as a removable template in porphyrin chemistry: diol cleavage products of [meso-tetraphenyl-2,3-cis-diolchlorinato]silver(II)

The use of Ag^II as a removable template in synthetic porphyrin chemistry is described. Mild procedures for the insertion of Ag^II into chlorins and the demetallation of the [chlorinato]Ag^II complexes are delineated. The UV-vis spectra of the novel [chlorinato]Ag^II complexes are discussed. The diol cleavage products of [meso-tetraphenyl-2,3-diolchlorinato]silver(II) under a number of conditions are characterized and compared to those resulting from the cleavage of the corresponding free base diol chlorin or its Ni^II complex, highlighting the unique templating effect of Ag^II. The scopes and limits of electrospray ionization mass spectrometry (ESI-MS) for the analysis of Ag^II chlorins is described. The use of Ag^II as a templating metal is superior over Ni^II or Zn^II for the preparation of free base pyrrole-modified porphyrins along metal templated pathways.     

Kinetic parameters of the In(III)/In(I) electrode reaction in bromide medium

The electrode kinetic parameters of the In(III)/In(I) couple in acidic 4M bromide solution have been determined by means of the rotating disc electrode technique.

---

Die elektrochemisch-kinetischen Parameter des In(III)/In(I)-Redoxsystems in Bromidlösung (Kurze Mitteilung)

Zusammenfassung Die elektrochemisch-kinetischen Parameter am In(III)/In(I)-Redoxsystem wurden in saurer 4-M-Bromidlösung mittels der rotierenden Scheibenelektrode bestimmt.

     

Chemical Reactions and Kinetics of the Carbon Monoxide Coupling in the Presence of

The chemical reactions and kinetics of the catalytic coupling reaction of carbon monoxide to diethyl oxalate were studied in the presence of hydrogen over a supported palladium catalyst in the gaseous phase at the typical coupling reaction conditions. The experiments were performed in a continuous flow fixed-bed reactor. The results indicated that hydrogen only reacts with ethyl nitrite to form ethanol, and kinetic studies revealed that the rate-determining step is the surface reaction of adsorbed hydrogen and the ethoxy radical (EtO-). A kinetic model is proposed and a comparison of the observed and calculated conversions showed that the rate expressions are of rather high confidence.     

Kinetic analysis of thermogravimetric data

Four many curves methods, viz. calculation techniques based on Eqs (30), (31), (34) and (36), respectively, for deriving kinetic parameters from several TG curves recorded with different heating rates are tested on two sets of theoretical TG curves. The maximum reaction rate temperature and conversion, as well as the approximate formulae used for their calculation are discussed. Some aspects of the kinetic compensation effect are analysed. The final conclusion is that the use of the many curves methods is not reasonable.     

Oxidation of mandelic acid derivatives catalysed by Bi(0)/O2 systems: mechanistic considerations

Mandelic acid and some aryl substituted derivatives were oxidised under molecular oxygen and a catalytic amount of Bi(0). The corresponding aldehydes and/or the carboxylic acids were obtained selectively depending on the nature of the substituent. Aldehydes and α-keto acids were oxidised under the same Bi(0)/O₂ system and α-keto acids were proposed as intermediates in the formation of benzoic acid derivatives.