Determination of cake thickness and porosity during cross-flow ultrafiltration on a plane ceramic membrane surface using an electrochemical method

The thickness and the porosity of a deposit during ultrafiltration experiments are determined using an electrochemical method. Twenty microelectrodes are mounted flush to a ceramic plane membrane and maps of deposit thickness are determined for three inlet/outlet distributors configurations. Combining an electrochemical method and a step transient method, the determination of the thickness and the porosity of a particles deposit is performed. These local thickness and porosity values are analyzed thanks to wall shear stress local measurements obtained in a previous work [Sep. Sci. Technol. 37 (10) (2002) 2251]. The results emphasize the heterogeneity of the deposit thickness, especially in zones of low wall shear stress. Furthermore, the porosity values of the deposit are ranged between 0.3 and 0.8 as a function of the location at the membrane surface.     

Silicalite-1膜反应器中的丙烷芳构化

在丙烷芳构化反应中，氢气起着相当重要的作用；根据理论分析，消除氢气将会有利于芳构化反应的进行。在Ｓｉｌｉｃａｌｉｔｅ－１沸石分子筛膜反应器，丙烷芳构化反应中的芳烃选择性提高了１０％－２０％。针Ｓｉｌｉｃａｌｉｔｅ－ｌ膜反应器与氧化铝膜反应器中的反应结果相比较，表明膜反应器效果不仅取决于膜的渗透选择性，而且还取决于膜的渗透率。     

拟多维高效液相色谱法分离纯化双峰驼精清中的活性蛋白

利用一种新的高效液相色谱洗脱技术，建立了 ｐＨ缓冲液／离子对二元洗脱模式，对双峰驼精清的两种提取物的反相柱上进行了分离，得到了较纯的活性蛋白组分。该法操作简单、快速、比常规ＨＰＬＣ有更高的选择性及峰容量，并可减少活性蛋白的失活。     

Convex programs with an additional reverse convex constraint

A method is presented for solving a class of global optimization problems of the form (P): minimizef(x), subject toxD,g(x)0, whereD is a closed convex subset ofR ⁿ andf,g are convex finite functionsR ⁿ . Under suitable stability hypotheses, it is shown that a feasible point is optimal if and only if 0=max{g(x):xD,f(x)f( )}. On the basis of this optimality criterion, the problem is reduced to a sequence of subproblemsQ _k ,k=1, 2, ..., each of which consists in maximizing the convex functiong(x) over some polyhedronS _k . The method is similar to the outer approximation method for maximizing a convex function over a compact convex set.     

Characterization of SiO2-P2O5-ZrO2 Sol-Gel/NAFION™ Composite Membranes

Composite membranes were prepared by (a) infiltrating NAFION with SiO₂-P₂O₅-ZrO₂ sol, and (b) recasting a film using NAFION solution containing SiO₂-P₂O₅-ZrO₂ sol. The membranes were characterized by Differential Thermal Analysis and ac-impedance spectroscopy as a function of relative humidity. The influences of the heat treatment (80°C–150°C) and cleaning on the electrical properties were investigated. The incorporation of SiO₂-P₂O₅-ZrO₂ gels into NAFION lead to improvements in its thermal stability and proton conductivity.     

以阴离子交换纤维素膜作基质室温燐光法测定痕量2,6-二氨基嘌呤的研究

本文对2,6-二氨基嘌呤(DAP)在不同的基质上和不同的重原子微扰剂存在下的室温燐光(RTP)强度进行比较,结果表明,NaI-NaAc是有效的重原子体系。适宜的固体基质为阴离子交换纤维素(二乙氨基乙基纤维素)膜(DEAE)和慢速定量滤纸。前者对酸度的变化具有较好的缓冲能力,本文提出了以DEAE为固体基质,测定痕量DAP的RTP法。     

高分子微泡的研究——Ⅰ.二烯丙基二(十二烷基)季铵盐的合成与聚合

本文合成了二烯丙基二(十二烷基)溴化铵(DADD),用超声波分散其水溶液而形成微泡。用γ射线、偶氮二异丁睛(AIBN)、过硫酸铵(APS)引发使微泡发生聚合,井对所得的微泡进行表征。实验结果证明:用γ射线引发能使微泡双分子膜发生全部聚合、而用AIBN,APS引发则只能发生部分聚合,聚合后,微泡的形状(态),渗透性行为、相转变温度等都未发生变化,但其稳定性却提高了,用断裂电镜证实了本文所合成的微泡是单室的双分子膜微泡。     

Immobilization of Glucose Oxidase on Cellulose／Cellulose Acetate Membrane and its Detection by Scanning Electrochemical Microscope （SECM）

Cellulose/cellulose acetate membranes were prepared and functionalized by introducingamino group on it, and then immobilized the glucose oxidase (Gox) on the functionalizd membrane.SECM was applied for the detection of enzyme activity immobilized on the membrane.Immobilized biomolecules on such membranes was combined with analysis apparatus and can beused in bioassays.     

分子印迹技术在样品前处理中的应用

分子印迹聚合物具有选择性高、稳定性好及制备简单的特点,可用于生物、医药、环境样品等复杂基体中痕量分析物的高选择性分离与富集,因此在样品前处理中的应用特别引人关注.本文介绍了分子印迹技术的基本原理,综述了分子印迹技术在样品前处理中应用的研究进展.