The use of the isotropic orientation factor in fluorescence resonance energy transfer (FRET) studies of the actin filament

A Dale-Eisinger style analysis (R. E. Daleet al., Biophys. J. 26, 161, 1979) is used to produce three-dimensional plots that display the limits on the average orientation factor k ² that is required to calculate molecular distances in F-actin from fluorescence resonance energy transfer measurements. Maxima and minima plots are generated for the transfer of energy from a donor to a single acceptor and for transfer to multiple acceptors that are related by F-actin helical symmetry. The analysis is performed in terms of dipole cone half-angles rather than depolarization factors, in order to facilitate the modeling of the multiple acceptor problem. Calculations are carried out under the restrictive condition of a single electric dipole moment per fluorophore. In addition, both surface and volume averaging of the donor and acceptor dipoles are considered. Comparisons between the plots show that for the multiple acceptor cases with F-actin symmetry, there is a great reduction in the range for maxima and minima limits on k ². The calculations also suggest guidelines for the choice of fluorescence label that will result in an average orientation factor occurring within acceptable limits, i.e., inside the limits for which k ²=2/3 may be employed. Thus, without having detailed knowledge of the mean donor or acceptor dipole relative orientations, the use of k ²=2/3 in radial coordinate studies of F-actin is more than reasonable and is fairly assured of being correct.     

Magnetic field effects on the crystal orientation and surface morphology of electrodeposited iron films

The effects of a magnetic field (5 T) on crystal orientation and surface morphology were investigated for iron films electrodeposited in ferrous aqueous solution. XRD measurements for the iron films showed that the preferred orientation parallel to the substrate was determined by the current density and not influenced by the magnetic field. By X-ray pole figure measurements, however, the crystal texture of the iron films electrodeposited at 10 mA cm^–2 and 30 mA cm^–2 was found to be controlled by the magnetic field. That is, the (110) planes were orientated in same direction of the magnetic field vector at angles of 30° and 35° to the direction normal to the substrate plane at 10 mA cm^–2 and 30 mA cm^–2, respectively. When the morphology was observed by SEM, iron grains at 30 mA cm^–2 changed from a triangular pyramid shape at 0 T to a complex star-like shape at 5 T.Presented at the 3rd International Symposium on Electrochemical Processing of Tailored Materials held at the 53rd Annual Meeting of the International Society of Electrochemistry, 15–20 September 2002, Düsseldorf, Germany     

Preparation,Thermal Behaviour,and Crystal Structure of MgAl<Subscript>2</Subscript>F<Subscript>8</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>

Summary.  Single crystals of MgAl₂F₈(H₂O)₂ have been obtained under hydrothermal conditions (250°C, 14 d) from a starting mixture of AlF₃ and MgAlF₅(H₂O)₂ in a 5% (w/w) HF solution. The crystal structure has been determined and refined from single crystal data (Fmmm (#69), Z = 4, a = 7.2691(7), b = 7.0954(16), c = 12.452(2) ?, 281 structure factors, 27 parameters, R(F ² > 2σ (F ²)) = 0.0282, wR(F ² all) = 0.0885). The obtained crystals were systematically twinned according to (010/100/001) as twinning matrix, reflecting the pseudo-tetragonal metric. The crystal structure is composed of perowskite-type layers built of corner sharing AlF₆ octahedra with an overall composition of AlF₄ ⁻ which are connected via common fluorine atoms of [MgF_4/2(H₂O)_2/1] octahedra. Group-subgroup relations of MgAl₂F₈(H₂O)₂ to WO₃(H₂O)_0.33 and to other M(II)M(III)₂ F₈(H₂O)₂ structures are briefly discussed. Above 570°C, MgAl₂F₈(H₂O)₂ decomposes under elimination of water into α-AlF₃, β-AlF₃, and MgF₂. Received October 29, 2001. Accepted (revised) December 6, 2001     

Structural studies of DMβCD/dihalogenated norcarane inclusion complexes

Inclusion complexes of 7,7-dibromonorcarane (1) and 7,7-dichloronorcarane (2) with 2,6-dimethyl--cyclodextrin (DMCD) have been synthesized. Their structures have been studied by chemical analysis, thermal behavior, IR spectra, UV absorptions and¹³C NMR spectra in DMSO solutions. The studies show that the orientation of (1) is different from that of (2) in the DMCD cavity.Presented at the 6th International Symposium on Molecular Recognition and Inclusion, Berlin, Germany, 10–14 September 1990.     

Crystalline orientation of the InN films prepared by atmospheric pressure halide chemical vapor deposition

The structural analysis of the hexagonal InN film prepared on a Si(100) substrate by the AP-HCVD technique using InCl₃ and NH₃ as starting materials were carried out by the X-ray pole figure analysis. The deposited films consist of the hexagonal InN pillar crystals. It was found that the pillar crystals, which have random rotation around the 100 axis, were grown at an angle of 70–90° to the substrate.     

(110)晶面全择优取向Cu镀层的制备及其条件优化

研究了添加剂聚乙二醇(PEG)、氯离子(Cl－)和电流密度对Cu的电沉积过程的影响, 着重探讨了制备(110)晶面全择优取向Cu镀层的电沉积条件及其形成机理. 循环伏安(CV)结果表明, PEG阻化Cu的电沉积, Cl－加快Cu的电沉积速率. XRD实验结果表明, PEG和Cl－在一定浓度范围有利于(110)晶面择优取向; 这两种不同特性的添加剂的协同作用可以制得(110)晶面全择优取向的较薄的Cu镀层; 所制备的全择优Cu镀层较稳定. 全择优取向Cu镀层形成的机理在于PEG和Cl－吸附过程联合起作用, 在不同晶粒的不同晶面进行选择吸附, 改变了晶面的生长速率及晶粒的快生长方向.     

The effect of methyl group on the mechanical properties of hydrophobic association hydrogel

Hydrophobic association hydrogels were fabricated via micellar copolymerization of acrylamide and hydrophobic monomers lauryl (meth)acrylate (LA or LMA) in an aqueous solution of sodium dodecyl sulfate. The effect of methyl groups of hydrophobic monomers on the crosslinking network structure and mechanical behavior of the gels was investigated on the basis of rubber elastic theory. It was found that the LMA-gel exhibited higher effective crosslink density and elastic modulus. The methyl groups of hydrophobic monomers limited the flexibility of the methacrylate backbone in the association domain, which resulted in the increment of chains constraints. With the increase of stretch rate, the dissipated energy of LMA-gel increased more highly than that of LA-gel. In addition, the methyl group hindered the movement of polymer chains, leading to the lower recovery efficiency of dissipated energy for LMA-gel. In contract, the LA-gel exhibited a rapid response to external force, and possessed better elasticity and self-recovery property. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1505–1512     

Contiguity relations for linearisable systems of Gambier type

We introduce the Schlesinger transformations for the Gambier, linearisable, equation and by combining the former construct the contiguity relations of the solutions of the latter. We extend the approach to the discrete domain obtaining thus the Schlesinger transformations and the contiguity relations of the solutions of the Gambier mapping. In all cases the resulting contiguity relation is a linearisable equation, involving free functions, and which can be related to the generic Gambier mapping.     

Salt effect on molecular orientation at air/liquid methanol interface

The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy(SFG-VS). We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.     

Characterizing polymer macrostructures by identifying and locating microstructures along their chains with the kerr effect

In this brief report, we demonstrate that Kerr effect measurements, which determine the excess birefringence contributed by polymer solutes in dilute solutions observed under a strong electric field, are highly sensitive to and capable of determining their microstructures, as well as their locations along the macromolecular backbone. Specifically, using atactic triblock copolymers with the same overall composition of styrene (S) and p-bromostyrene (pBrS) units, but with two different block arrangements, that is, pBrS₉₀-b-S₁₂₀-b-pBrS₉₀ (I) and S₆₀-b-pBrS₁₈₀-b-S₆₀ (II), which are indistinguishable by NMR, we detected a dramatic difference in their molar Kerr constants (_mK), in agreement with those previously estimated. Although similar in magnitude, their Kerr constants differ in sign, with _mK(II) positive and _mK(I) negative. In addition, S/pBrS random and gradient copolymers synthesized by reversible addition-fragmentation chain-transfer (RAFT) polymerization exhibit a heretofore unexpected enhanced enchainment of racemic (r) pBrS-pBrS diads. Comparison of their observed and calculated _mKs suggests that the gradient S/pBrS copolymers possess an unanticipated additional gradient in stereosequence that parallels their comonomer gradient, that is, as the concentration of pBrs units decreases from one end of the copolymer chain to the other, so does the content of r diads. This conclusion could only be reached by comparison of observed and calculated Kerr effects, which access the global properties of macromolecules, and not NMR, which is only sensitive to local polymer structural environments, but not to their locations on the copolymer chains. Molar Kerr constants are characteristic of entire polymer chains and are highly sensitive to their constituent microstructures and their distribution along the chain. They may be used to both identify constituent microstructures and locate them along the polymer chain, thereby enabling, for the first time, characterization of their complete macrostructures. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013