末端碳链长度对偶氮苯自组装膜结构的影响

The end-group dominated molecular orientation in the azobenzene self-assembled monolayers (SAMs), CnAzoC2SH (n=1-4), on gold was evaluated for the first time by grazing incidence reflection absorption FTIR spectroscopy (RA-FTIR). All these azobenzene SAMs have highly-organized and closely-parked structures, with the molecule tilting away gradually from surface normal direction with the increase of end group alkyl length.     

A process–structure–property study of anisotropic PMDA-ODA films

A practical methodology for the correlation and prediction of the process–property performance of advanced materials is developed. The model polymer studied is PMDA-ODA polyimide. The connecting link between the process and the properties is the structural state of the polymer. An essential ingredient for a quantitative characterization of the system is a knowledge of its phase state and intrinsic molecular properties. The intrinsic molecular properties define the limiting performance properties available to the polymer. Anisotropic films and sheets produced by five different fabrication processes are examined. Maps of the molecular symmetry axis, the orientation function, and the thickness distributions of two 50-in.-wide sheets fabricated differently are measured nondestructively for process comparison. Four other film fabrication processes are examined and their three-dimensional orientation states determined and correlated. A three-dimensional orientation function triangular plot permits simultaneous representation of the different fabrication processes on the same figure and allows the investigator to choose the most economic and efficient fabrication route. The structure–property study includes the structural correlation and intrinsic molecular property determination of the anisotropic coefficient of thermal expansion (CTE), the anisotropic mechanical moduli and compliances, and the anisotropic dielectric constants. 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 777–788, 1997     

Thermal diffusivity of polymer films by pulsed photothermal radiometry

We have developed a pulsed photothermal radiometry technique for determining the thermal diffusivity parallel to the surface of a polymer film that involves flashing a line-shaped laser beam on the surface of the sample at right angle to its length, and monitoring the temperature change with time at a distance from the line source using an infrared detector. Combining this with our previous laser-flash radiometry method for thermal diffusivity measurement perpendicular to the film surface, we can now measure the thermal diffusivity of a polymer film along all directions. These two techniques have been used to study uniaxially and biaxially oriented poly(ethylene terephalate) and uniaxially drawn ultrahigh molecular weight polyethylene films. For uniaxially oriented poly(ethylene terephalate), the thermal diffusivity along the draw direction is substantially higher than that in the transverse direction, which in turn, is slightly higher than that in the thickness direction. For a polyethylene film with a draw ratio of 200, the axial thermal diffusivity is extremely high, being about five times that of stainless steel. The anisotropy of the thermal diffusivity of this film exceeds 90. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1621–1631, 1997     

Crystalline orientation of the InN films prepared by atmospheric pressure halide chemical vapor deposition

The structural analysis of the hexagonal InN film prepared on a Si(100) substrate by the AP-HCVD technique using InCl₃ and NH₃ as starting materials were carried out by the X-ray pole figure analysis. The deposited films consist of the hexagonal InN pillar crystals. It was found that the pillar crystals, which have random rotation around the 100 axis, were grown at an angle of 70–90° to the substrate.     

Synthesis and characterization of aromatic polyamides containing alkylphthalimido pendent groups

A series of polyisophthalamides containing pendent phthalimido groups and flexible side spacers were prepared from four novel diacids and three commercial aromatic diamines. These polyamides were prepared in high yields and with high molecular weights by direct polycondensation with triphenyl phosphite and pyridine as condensing agents. The weight‐average and number‐average molecular weights, measured by gel permeation chromatography, were 70,000–137,000 and 47,000–86,000 g/mol, respectively. The novel polyamides were amorphous and readily soluble and showed glass‐transition temperatures of 150–240 °C, as measured by differential scanning calorimetry. Thermogravimetric analysis showed that the 10% weight‐loss temperatures in nitrogen were 355–430 °C, a significant improvement in thermal stability having been observed with the increase in the side‐chain length. A theoretical quantum mechanical study was successfully carried out to explain these results. Flexible and tough films, cast from polymer solutions, showed tensile strengths of 50–125 MPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3711–3724, 2002     

Relations between kinetic parameters of different column models for liquid chromatography applying core-shell particles

This article presents analytical solutions of the general rate model (GRM), the lumped kinetic model (LKM), and the simpler equilibrium dispersive model (EDM) for core-shell particles and linear adsorption isotherms. The solutions in the Laplace domain are applied to derive analytical expressions for the temporal moments of these models. The results provide relations between the model specific kinetic parameters by matching one or more of the temporal moments. Several case studies are considered for illustration. The results show that simpler models are in many cases as good as the most detailed GRM if their kinetic parameters fulfill the matching relations. Thus, it is possible to reliably predict elution profiles using the simpler models. The derived analytical expressions can also be utilized to efficiently estimate model parameters from experimentally observed elution profiles to further optimize core-shell particles and to identify suitable column sizes and operating conditions.     

自组装DNA吸附取向的表面增强拉曼光谱法研究

对金基体上自组装寡聚核苷酸探针杂交前后进行电化学非现场及现场表面增强拉曼光谱(SERS)研究.非现场SERS研究表明,杂交形成的dsDNA在基体表面以A型和B型两种构象同时存在,杂交过程可能伴随DNA链在基体表面吸附取向的变化.根据现场SERS研究结果可知,ssDNA及dsDNA的大多数SERS谱带强度随电极电位正移而降低,尤其是归属于碱基A的两种面外振动模式,谱带变化更为明显.利用SERS表面选择定则判断出随着电极电位由负向正变化,ssDNA及dsDNA螺旋吸附取向由垂直吸附向平躺吸附于金基体表面变化.     

Elaboration of ZnO Thin Films with Preferential Orientation by a Soft Chemistry Route

Microcrystalline ZnO films presenting well-defined and tunable orientation were obtained by spin coating of alcoholic sols by two different approaches, based on controlled hydrolysis-condensation of Zn-ethanolamine complexes. As-deposited films are formed by amorphous zinc oxide-acetate submicronic particles, which are transformed into oriented ZnO after thermal treatment. The orientation of ZnO depends on the synthesis method, and the solvent. While in ethanol and [Zn] = 0.05 mol·L^–1, films consist of rectangular platelets oriented with the (100) planes parallel to the substrate (a//n), the orientation of the particles changes to (c//n) for systems in 2-methoxyethanol (2-ME) and [Zn] = 0.75 mol·L^–1. A study of chemical factors that influence the orientation (precursor, solvent, MEA/Zn ratio, concentration, coating parameters, heat treatment) is presented.     

Thermal properties and structure of electrospun blends of PVDF with a fluorinated copolymer

We report the structure and thermal properties of blends comprising poly(vinylidene fluoride) (PVDF) and a random fluorinated copolymer (FCP) of poly(methyl methacrylate)‐random‐1H,1H,2H,2H‐perfluorodecyl methacrylate, promising membrane materials for oil–water separation. The roles of processing method and copolymer content on structure and properties were studied for fibrous membranes and films with varying compositions. Bead‐free, nonwoven fibrous membranes were obtained by electrospinning. Fiber diameters ranged from 0.4 to 1.9 μm, and thinner fibers were obtained for PVDF content >80%. As copolymer content increased, degree of crystallinity and onset of degradation for each blend decreased. Processing conditions have a greater impact on the crystallographic phase of PVDF than copolymer content. Fibers have polar beta phase; solution‐cast films contain gamma and beta phase; and melt crystallized films form alpha phase. Kwei's model was used to model the glass transition temperatures of the blends. Addition of FCP increases hydrophobicity of the electrospun membranes. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 312–322