A comparative study of two polymorphs of L‐aspartic acid hydrochloride

Two polymorphs of L‐aspartic acid hydrochloride, C₄H₈NO₄⁺·Cl⁻, were obtained from the same aqueous solution. Their crystal structures have been determined from single‐crystal data collected at 100 K. The crystal structures revealed three‐ and two‐dimensional hydrogen‐bonding networks for the triclinic and orthorhombic polymorphs, respectively. The cations and anions are connected to one another via N—H...Cl and O—H...Cl interactions and form alternating cation–anion layer‐like structures. The two polymorphs share common structural features; however, the conformations of the L‐aspartate cations and the crystal packings are different. Furthermore, the molecular packing of the orthorhombic polymorph contains more interesting interactions which seems to be a favourable factor for more efficient charge transfer within the crystal.     

Mixed Aggregates of 1-Methoxyallenyllithium with Lithium Chloride

A combined computational and ¹³C NMR study was used to investigate the formation of mixed aggregates of 1-methoxyallenyllithium and lithium chloride in tetrahydrofuran (THF) solution. The observed and calculated chemical shifts, as well as the calculated free energies of mixed aggregate formation (MP2/6-31+G(d)), are consistent with the formation of a mixed dimer as the major species in solution. Free energies of mixed dimer, trimer, and tetramer formation were calculated by using the B3LYP and MP2 methods and the 6-31+G(d) basis set. The two methods generated different predictions of which mixed aggregates will be formed, with B3LYP/6-31+G(d) favoring mixed trimers and tetramers in THF solution, and MP2/6-31+G(d) favoring mixed dimers. Formation of the sterically unhindered mixed dimers is also consistent with the enhanced reactivity of these compounds in the presence of lithium chloride. The spectra are also consistent with some residual 1-methoxyallenyllithium tetramer, as well as small amounts of higher mixed aggregates. Although neither computational method is perfect, for this particular system, the calculated free energies derived using the MP2 method are in better agreement with experimental data than those derived using the B3LYP method.     

An original approach for Raman spectroscopy analysis of radioactive materials and its application to americium‐containing samples

An approach for Raman measurements of highly radioactive samples is presented here. The innovative part of this approach lies in the fact that no single part of the Raman equipment is in direct contact with the radioactive sample, as the sample is sealed in an alpha‐tight capsule. Raman analysis is effectively performed through the optical‐grade quartz window closing the capsule. This allows performing micro‐Raman measurements on radioactive samples with no limitations on the laser source wavelength, polarisation mode, spectrometer mode and microscope mode (provided the focal length of the microscope objective is greater than the thickness of the quartz window and with sub mg samples). Some example results are shown and discussed. In particular, some spectral features of americium‐containing oxide nuclear fuel specimens are presented. Raman spectra clearly reveal in these specimens the presence of abundant oxygen defects induced in the fcc fluorite lattice by trivalent americium. In order to complete the analysis the Raman spectrum of pure americium dioxide was also measured with a lower energy excitation source compared with previous research. The current results seem to be consistent with the possible occurrence of a photolysis process induced by the Raman laser, resulting in the formation of hyperstoichiometric americium sesquioxide Am₂O_{3 + z}. Such a photolytic process is deemed to be unavoidable when visible lasers are used as excitation sources for the Raman analysis of americium dioxide. © 2015 The Authors Journal of Raman Spectroscopy Published by John Wiley & Sons, Ltd.     

Heavy Chains: Synthesis,Reactivity and Decomposition of Interpnictogen Chains with Terminal Diaryl Bismuth Fragments

In this work, we report the preparation of multiple interpnictogen chain compounds with three consecutive pnictogen atoms and terminal Ar₂Bi fragments (Ar=Ph, Mes). Symmetrical compounds of the form Ar₂Bi−E(tBu)−Bi₂Ar ( 1 : Ar=Ph, E=P; 2 : Ar=Ph, Mes, E=As) as well as ternary interpnictogen compounds of the form Ar₂Bi−E¹(tBu)−E²tBu₂ (Ar=Ph, Mes; 4 : E¹=P, E²=As; 5 : E¹=P, E²=Sb; 6 : E¹=As, E²=P) were prepared. The decomposition in solution at room temperature and under the influence of light was studied for compounds 1 – 6 . The reactivity of 1_Ph and 2_Ph with the small N-heterocyclic carbene 1,3,4,5-tetramethylimidazol-2-ylidene (Me₂IMe) was also studied. In the case of 1_Ph , the formation and consecutive decomposition of Me₂IMe=PtBu ( 8 ) was observed in solution. Hence, it was shown that 1_Ph can react as a “masked phosphinidene”. In the case of 2_Ph , no reaction with Me₂IMe was observed. All isolated compounds were analysed by NMR and IR spectroscopy, mass spectrometry, elemental analysis and single-crystal X-ray diffraction.     

[2+3] Amide Cages by Oxidation of [2+3] Imine Cages – Revisiting Molecular Hosts for Highly Efficient Nitrate Binding

The pollution of groundwater with nitrate is a serious issue because nitrate can cause several diseases such as methemoglobinemia or cancer. Therefore, selective removal of nitrate by efficient binding to supramolecular hosts is highly desired. Here we describe how to make [2+3] amide cages in very high to quantitative yields by applying an optimized Pinnick oxidation protocol for the conversion of corresponding imine cages. By NMR titration experiments of the eight different [2+3] amide cages with nitrate, chloride and hydrogen sulfate we identified one cage with an unprecedented high selectivity towards nitrate binding vs. chloride (S=705) or hydrogensulfate (S>13500) in CD₂Cl₂/CD₃CN (1 : 3). NMR experiments as well as single-crystal structure comparison of host-guest complexes give insight into structure-property-relationships.     

A Macrocyclic Furan with Accessible Oxidation States: Switching Between Aromatic and Antiaromatic Global Ring Currents

Macrocyclic furans are predicted to switch between global aromaticity and antiaromaticity, depending on their oxidation states. However, the macrocyclic furans reported to date are stabilized by electron withdrawing groups, which result in inaccessible oxidation states. To circumvent this problem, a post-macrocyclization approach was applied to introduce methylene-substituted macrocyclic furans, which display an extremely low oxidation potential of −0.23 vs. Fc/Fc⁺, and are partially oxidized in ambient conditions. Additional oxidation to the dication results in aromaticity switching to a global 30πe⁻ aromatic state, as indicated by the formation of a strong diatropic current observed in the ¹H NMR spectrum. NICS and ACID calculations support this trend and provide evidence for a different pathway for the global current in the neutral and dicationic states. According to these findings, macrocyclic furans can be rendered as promising p-type materials with stable oxidation states.     

Ru掺杂对Fe催化剂上酚类化合物加氢脱氧影响的密度泛函理论研究北大核心CSCD

采用密度泛函理论(DFT)计算研究了苯酚、邻甲酚、愈创木酚在不同结构Ru-Fe(211)表面上吸附活化性能和加氢脱氧反应路径.结果表明,Ru掺杂能促进H2分子在Fe(211)表面上解离,提高加氢脱氧反应速率.酚类在1Ru_(ads)-Fe(211)表面上吸附比在1Ru_(sub)-Fe(211)表面上更稳定,苯酚和邻甲酚脱羟基步骤能垒分别降低0.13和0.28 eV,有利于生成芳烃.愈创木酚在1Ru_(sub)-Fe(211)表面上加氢脱氧优势路径是先脱甲氧基生成苯酚,苯酚再加氢脱氧生成产物苯(速控步骤能垒1.16 eV);而在1Ru_(ads)-Fe(211)表面上愈创木酚先脱羟基再脱甲基生成苯酚的路径更具有动力学优势(速控步骤能垒1.21 eV).计算结果表明Ru掺杂方式影响Fe催化剂对酚反应分子的吸附稳定性以及加氢脱氧反应路径和性能.与1Ru掺杂Fe(211)催化剂相比,增加Ru原子数形成4Ru_(ads)-Fe(211),能够进一步提高酚类反应物的吸附强度,但导致加氢脱氧反应能垒升高.因此,在Fe催化剂上以表面吸附的形式掺杂少量贵金属Ru更利于酚类加氢脱氧生成芳烃.     

Histone deacetylase (HDAC) inhibitor curcumin upregulates mitochondrial uncoupling protein1 (UCP1) and mitochondrial function in brown adipocytes,in-silico study and screening natural drug library

Mitochondrial dysfunction has been associated with diverse pathological conditions globally. Specifically, in adipose tissues, mitochondrial dysfunction is the primary cause of obesity and obesity-related illnesses. An existing drugs such as atorvastatin and other lipid-lowering drugs demonstrated adverse effects and initiated other diseases. Thus, we need to explore new methods to prevent and treat obesity. In this study, we used the cell screening method to identify several natural compounds that increase adipocyte UCP1 gene expression. The identified drug Curcumin was evaluated in cell models and the In-silico model. We found curcumin is an active compound of turmeric belonging to Zingiberaceae (ginger family), which activates the Nrf2 mechanism. Curcumin potentially endorses the expression of UCP1 in the brown adipocyte in vitro cellular model. Curcumin plays an important role that modulating mitochondrial function and improving mitochondrial DNA quantification, ATP production, and cell viability. We have established an efficient in vitro cell experiment system to study the metabolic regulation of UCP1. The in-silico model revealed curcumin-UCP1 interaction. Curcumin, via enhancing mitochondrial activity, could be a helpful therapeutic molecule against metabolic disorders or obesity-related diseases. Curcumin will be the subject of more research in both human and murine models, which will provide novel therapeutic pathways for the treatment of metabolic illnesses by modulating the control of mitochondrial function.     

New Luminescent Lanthanide Tetrakis-Complexes NEt4[LnL4] Based on Dimethyl-N-Benzoylamidophosphate

New lanthanide dimethyl-N-benzoylamidophosphate (HL) based tetrakis-complexes NEt₄[LnL₄] (Ln³⁺=La, Nd, Sm, Eu, Gd, Tb, Dy) are reported. The complexes are characterized by means of NMR, IR, absorption, and luminescent spectroscopy as well as by elemental, X-Ray, and thermal gravimetric analyses. The phenyl groups of the four ligands of the complex anion are directed towards one side, while the methoxy groups are directed in the opposite side, which makes the complexes under consideration structurally similar to calixarenes. The effect of changing the alkali metal counterion to the organic cation NEt₄⁺ on the structure and properties of the tetrakis-complex [LnL4]^- is analyzed. The complexes exhibit bright characteristic for respective lanthanides luminescence. Rather high intensity of the band of ⁵D₀→⁷F₄ transition, observed in the luminescence spectrum of NEt₄[EuL₄], is discussed based on theoretical calculations.     

Earth-abundant Metal-catalyzed Reductive Amination: Recent Advances and Prospect for Future Catalysis

Nitrogen-containing compounds, as an important class of chemicals, have been used widely in pharmaceuticals, materials synthesis. Transition metal-catalyzed reductive amination of an aldehyde or a ketone with ammonia or an amine has been proved to be an efficient and practical method for the preparation of nitrogen-containing compounds in academia and industry for a century. Given the above, several effective methods using transition metals have been developed in recent years. Noble transition metals like Pd, Pt, and Au-based catalysts have been predominately used in reductive amination. Because of their high prices, strict official regulations of residues in pharmaceuticals, and deleterious effects on the biological system, their industrial applications are severely hampered. With the increasing sustainable and environmental problems, the Earth-abundant transition metals including Ti, Fe, Co, Ni, and Zr have also been investigated for the reductive amination reaction and showed great potential to the advancement of sustainable and cost-effective reductive amination processes. This critical review will mainly summarize the work using Earth-abundant metals. The effects of different transition metals used in catalytic reduction amination were discussed and compared, and some suggestions were given. The last section highlights the catalytic activities of bi- and tri-metallic catalysts. Indeed, this latter family is very promising and simultaneously benefits from increased stability, and selectivity, compared to monometallic NPs, due to synergistic substrate activation. Few comprehensive reviews focusing on Earth-abundant transition metals catalyst has been published since 1948, although several authors reported some summaries dealing with one or the other part of this aspect. It is hoped that this critical review will inspire researchers to develop new efficient and selective earth-abundant metal catalysts for highly, environmentally sustainable reductive amination methods, as well as improve the pharmaceutical industry and related chemical synthesis company traditional method with the utilization of the green method widely.