Study on Dyeing Properties of Functional Acrylic Fiber

Anti‐mite acrylic fiber is a new type of functional fiber which incorporates a small amount of anti‐mite agent. Basic dye can be used in the dyeing of the functional acrylic fiber. Compared with the dyeing properties of conventional fibers, the dyeing properties of the functional acrylic fiber have new characteristics such as different dyeing temperature, time, amount of leveling agent and pH level due to the rough surface and larger size of micro‐channels in the functional fiber structure that helps basic dye molecules to diffuse into the fiber.     

A Preliminary Study on Preparation of the Aromatic/Aliphatic Co‐polyurea as Spun Fibers

Aromatic‐aliphatic co‐polyurea has been synthesized from 4,4 prime‐diphenylmethane diisocyanate (MDI), m‐phenylene diamine (m‐PDA), and 1,6‐diaminohexane (HDA) in DMAc by solution polymerization. The chemical structure of the co‐polyurea has been characterized by ¹H‐NMR. The thermal properties of the copolymers were measured by DSC and TGA. The co‐polyurea solutions were spun into fibers by means of wet spinning. The effects of coagulation conditions on the morphologies and mechanical properties of the co‐polyurea as spun fibers are discussed.     

Diffusion Mechanism of As‐spun Polyacrylonitrile Fiber in a Dimethyl Sulfoxide‐Water Coagulation Bath

In this paper, the diffusion mechanism of as‐spun PAN fiber was investigated in dimethyl sulfoxide‐water by determining the dynamic compositions of the fibers and the diffusion coefficients of solvent and nonsolvent during coagulation. The diffusion process could be divided into two stages. Results showed that the first stage of the diffusion process was the most important during the whole process, which was fundamental to further study on the formation mechanism. Also, compared with wet spinning, the dry‐jet wet spinning method had the advantage of mild coagulating at a high jet‐stretch. At high concentrations, the diffusion coefficients increased and the ratio of solvent diffusion coefficient to nonsolvent diffusion coefficient decreased; an increasing temperature resulted in the increase of both diffusion coefficients with a decrease in their ratios. To some extent, for the PAN‐DMSO‐water system, the more the ratios D_s*/D_n* tended to 1, the more the cross‐section shapes of as‐spun PAN fiber tended to be circular.     

13C-NMR Sequence Analysis. XVIII. Tacticity of Poly(D,L-β-amino Acids)

D, L-Cis-2-aminocyclobutane-1-carboxylic acid NCA, D, L-cis-and trans-2-aminocyclohexane-1-carboxylic acid N-carboxyanhydride (NCA) and D, L-cis-2-aminocyclohexane-1-carboxylic acid NCA were polymerized under various conditions. The ¹³C-NMR spectra of the resulting β-polyamides measured in trifluoro-acetic acid show splittings of all signals reflecting diads and triads. Poly-D, L-3-aminobutyric acid obtained by anionic polymerization of D, L-4-methyl acetidinone does not display tacticity effects in its ¹³C-NMR spectrum. Hence it is concluded that tacticity effects are observable only if both α- and β-carbons have a substituent. Furthermore, it was found that the reaction conditions do not have a strong influence on the stereospecificity of the NCA-polymerization. In all cases nearly random sequences of D and L-units were obtained.     

Relationship between Reactivity Ratios and Configuration for Donor—Acceptor Type Copolymers

For binary copolymers from an acrylic monomer (acceptor type, M¹) and an aromatic-substituted monomer (donor type, M₂) a linear relation between log (r₂/r¹) and the probability of “coisotactic” alternating addition is observed. This can be a proof for the influence of monomer polarity on the copolymer configuration.     

Microwave‐assisted Chemical Reactions

Microwave (MW) radiation has been used in chemical analysis and chemical synthesis. MW heating under controlled conditions offers distinct advantages over conventional heating. The reactions are carried out in environmentally clean and safe solvents and in many cases, reactions can be carried out under solvent‐free conditions. This method of synthesis has grown rapidly and found its use in various sectors. This paper reviews some of the reactions that have been accelerated with higher yields under MW irradiation. The application of MW‐assisted synthesis in the medicinal and pharmaceutical industries will be emphasized.     

Effects of Ultra-sonification Assisting Polyethylene Glycol Pre-treatment on the Crystallinity and Accessibility of Cellulose Fiber

In order to prepare the advanced cellulosic super-absorbent polymer with high grafting level, we tried the novel ultrasound wave assisting polyethylene glycol (PEG) pre-treatment method to decrease the crystallinity and increase the accessibility of cellulose fiber. The effects of ultrasonification assisting PEG method on the crystallinity and swelling capacity of cellulose fiber were investigated. To optimize the experimental condition, the Taguchi method was employed in the treatment process. The influence factors such as ultrasonic wave power, ultrasonic wave time and PEG molecular weight relative to the crystallinity of cellulose fiber were studied systematically. The degree of crystallinity of cellulose fiber was measured by wide-angle X-ray diffraction (WAXD). The morphology of cellulose fiber was observed by environment scanning electron microscopy (ESEM). The effects of pre-treatment variables on the water absorbency and water retention values of cellulose fiber were also investigated. The research results revealed that, under the optimal experimental condition (ultrasonic powder, 500 W; ultrasonic time, 150 s; PEG molecular weight, 600 g/mol), the crystallinity of cellulose fiber decreased from 72.16 to 42.95%. Accordingly, the absorbency of cellulose fiber increased from 1.436 to 2.063 g/g, and the water retention value increased from 47.21 to 113.4%. However, the morphology of cellulose fiber did not change thoroughly compared with the original cellulose fiber. It can be hypothesized that the original inter- and intra-macromolecular hydrogen bonds in cellulose network were weakened, resulting from the high level dispersion of PEG within cellulose network without breaking the surface morphology of fiber.     

Effect of Polycondensation Reaction Conditions on the Properties of Thermotropic Liquid‐Crystalline Copolyester

In this study a range of wholly aromatic copolyesters based on kink m‐acetoxybenzoic acid (m‐ABA) monomer (33 mol%) and equimolar‐linear p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA) and terephthalic acid (TPA) monomers (67 mol%) have been synthesized by melt polycondensation reaction process at 280°C and 260°C for different time intervals. Characterization of copolyesters were performed by solution viscosity measurement, wide–angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), hot‐stage polarized light microscopy, proton‐nuclear magnetic resonance analysis (¹H‐NMR). According to the results obtained, copolyesters showed thermotropic liquid crystalline behavior in an appropriate temperature range. The copolyesters were prepared in high yields. It was observed that the intrinsic viscosities of the copolyesters are increased regularly with increasing polymerization time and temperature. All the copolyesters were soluble in a trifluoroacetic acid/dichloromethane (30:70 v/v) except the copolyesters which were synthesized at 280°C in 5 h. According to the WAXD results; the degree of crystallinity of copolyesters were found to be between 5–15%. DSC and hot stage polarized light microscopy results showed that all the copolyesters are melt processable and a significant molecular interaction exist in a very broad temperature range (160°C and 165°C) in the nematic mesophase. The T_g values are increased with an increasing polycondensation reaction time and temperature and they were observed between 93–126°C. Fibers prepared by a hand‐spinning technique from the polymer melt exhibit well‐developed fibrillar structure parallel to the fiber axis.     

Preparation,Characterization and Electromagnetic Shielding Effectiveness of Conductive Polythiophene/Poly(ethylene terephthalate) Composite Fibers

Conductive polythiophene (PTh)/poly(ethylene terephthalate) (PET) composite fibers were prepared by polymerization of thiophene in the presence of PET fibers in acetonitrile medium using FeCl₃. The effects of polymerization conditions such as oxidant/monomer mol ratio and polymerization temperature and time on PTh content and surface electrical resistivity of PTh/PET composite fiber were investigated in detail. It was observed that the usage of preswelled PET fibers in dichloromethane increased the PTh content and decreased surface resistivity of composite fiber. Composite fiber having the highest PTh content (5.7%) and the lowest surface resistivity (80 kΩ) was obtained at 20°C with 1.25 M FeCl₃ and 0.42 M thiophene concentrations. The washing effects of laundering detergent and dry cleaning liquid on surface resistivity of composite fibers were investigated. The electromagnetic shielding effectiveness (EMSE) and relative shielding efficiency by absorption and reflection of composite fibers were measured in the radio and microwave frequency range. The results show that the EMSE values decreased with increasing frequency from radio waves to microwaves with an attenuation of 21 dB to 4 dB.     

Rheological Behavior of Dope Solutions of Poly(acrylonitrile‐co‐itaconic acid) in N,N‐dimethylformamide: Effect of Polymer Molar Mass

The rheological behavior of dope solutions of poly(acrylonitrile‐co‐itaconic acid) or poly(AN‐co‐IA) is important from the point of view of deriving the spinning conditions for good quality special acrylic fibers. The viscosity of the resin dope is dictated by the polymer concentration, molar mass, temperature and shear force. The dynamic shear rheology of concentrated poly(AN‐co‐IA) polymer dope solutions in N, N‐dimethylformamide, in the molar mass (M¯_v) range of 1×10⁵ to 1×10⁶ g/mol, was investigated in the shear rate (γ′) range of 1×10¹ to 5×10⁴ min^?1. An empirical relation between η and M¯_v was found to exist at constant shear rate. The dope viscosity was dependent on the molar mass and the shear rate at a given temperature (T) and concentration. The polymer molar mass index of dope viscosity (m) was calculated as functions of concentration (c), shear rate and temperature. The m values increased with shear rate and temperature. A master equation relating m, with shear rate and temperature was derived for a given dope concentration. At higher shear rates, m tends to the value of 3.4, which is close to the molar mass index of viscosity reported for molten thermoplastics. m increased significantly with shear rate and nominally with temperature, while an increase in concentration decreased it. The onset of shear thinning of the dope shifted to a lower shear rate regime with an increase in polymer concentration and the molar mass. For a given value of molar mass, the increase in viscosity of the dope solution with polymer concentration was dependent on the shear rate.