Multi-cracks problem for piezoelectric materials strip subjected to dynamic loading

This paper analyses and models the dynamic interaction among permeable multi-cracks in a piezoelectric strip under anti-plane shear waves by the Schmidt method. The Fourier transform is applied and then two pairs of triple integral equations can be solved using the Schmidt method. The results show that the stress and the electric displacement intensity factors of cracks depend on not only the crack length and the piezoelectric coefficient, but also the thickness of the piezoelectric strip, the distance between multi-cracks and the frequency of incident wave.     

Elasticity in nanocrystalline Nd2Fe14B+αFe magnetic composites

The dynamic Young modulus (E) of magnetic Nd₂Fe₁₄B+αFe nanocomposites is investigated with mechanical spectroscopy techniques (vibrating reed configuration, f≈1.5 kHz <10⁻⁶). Reduced values of E are obtained (88–152 GPa) as compared with that predicted by the rule of mixtures for the composite (164 GPa). Three contributions to this reduction are briefly discussed: a large volume fraction of the specimen with grain boundary like structure; internal pores, resulting from the high cooling rate during processing (10⁶ K/min) and magneto-mechanical effects. Even when porosity is identified as the principal cause of modulus reduction, magnetic effects are also detected.     

Glass-forming liquids,anomalous liquids,and polyamorphism in liquids and biopolymers

Summary Glass formation in nature and materials science is reviewed and the recent recognition of polymorphism within the glassy state, polyamorphism, is discussed. The process by which the glassy state originates during the continuous cooling or viscous slowdown process, is examined and the three canonical characteristics of relaxing liquids are correlated through the fragility. The conversion of strong liquids to fragile liquids by pressure-induced coordination number increases is discussed, and then it is shown that for the same type of system it is possible to have the same conversion accomplished via a first-order transition within the liquid state. The systems in which this can happen are of the same type which exhibit polyamorphism, and the whole phenomenology can be accounted for by a recent simple modification of the van der Waals model for tetrahedrally bonded liquids. The concept of complex amorphous systems which can lose a significant number of degrees of freedom through weak first-order transitions is then used to discuss the relation between native and denatured hydrated proteins, since the latter have much in common with plasticized chain polymer systems. Finally, we close the circle by taking a short-time-scale phenomenon given much attention by protein physicists,viz., the onset of an anomaly in the Debye-Waller factor with increasing temperature, and showing that for a wide variety of liquids, including computer-simulated strong and fragile ionic liquids, this phenomenon is closely correlated with the experimental glass transition temperature. This implies that the latter owes its origin to the onset of strong anharmonicity in certain components of the vibrational density of states (evidently related to the boson peak) which then permits the system to gain access to its configurational degrees of freedom. The more anharmonic these vibrational components, the closer to the Kauzmann temperature will commence the exploration of configuration space and, for a given configurational microstate degeneracy, the more fragile the liquid will be. Paper presented at the I International Conference on Scaling Concepts and Complex Fluids, Copanello, Italy, July 4–8, 1994.     

含氰基的酚醛树脂及其碳纤维复合材料

含氰基的酚醛树脂，具有优异的耐高温性能和高温下的机械强度，在３１５℃下性能变化甚小；不着火，发烟量低，有良好的加工成型性能。热固化过程中氰基成三嗪环而交联，没有小分子脱出，是一类具有广泛发展前景的新型热固性树脂。     

Thermoanalytical procedures to identify the morphology of polycrystalline materials

Polypropylenes of differing morphologies were examined by differential thermal analysis. The problems of reordering during the programmed heating are discussed. Four potential procedures by which the reordering could be inhibited are considered, and three of these are experimentally assessed. Their advantages and deficiencies are identified. Two pretreatments, an etching and a crosslinking, are recognised as able to qualitatively characterise the initial morphology, with a preference for the former. A test to identify the occurrence of reordering is identified. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

An efficient lasing action from pyrromethene 556 dye-doped organically modified silicates

Organically modified solid-state silicates (ORMOSILS) doped with a new laser dye 1,3,5,7,8-pentamethylpyrromethene-2,6-disulfonate-BF₂ complex (pyrromethene 556) have been synthesized by a sol-gel method and the compositional effects on pore characteristics, fluorescence and lasing properties have been investigated. It is found that the use of dimethylsulfoxide and γ-glycidoxypropyltrimethoxysilane could greatly change the structure properties of sol-gel derived ORMOSILS cage, and thus the fluorescence and lasing properties of the materials could improve significantly. A successful laser oscillation from this dye-doped ORMOSILS sample has been achieved upon pumping with a Q-switched frequency-doubled Nd:YAG laser at 532 nm. A slope efficiency of 54% with a useful lifetime greater than 10,000 shots has been demonstrated at a pump repetition rate of 1 Hz and a pump intensity of 1 J/cm² by using the new ORMOSILS cage on our newly designed laser system. Our results have shown that it is possible to obtain a high-efficiency with a long-lifetime for a compact new laser device by low cost dye-doped solid-state ORMOSILS.     

High spin chemistry underlying organic molecular magnetism: Topological symmetry rule as the first principle of spin alignment in organic open-shell systems of π-conjugation and their ions

This review paper deals with an overview of molecule-based magnetism as a rapidly developing interdisciplinary field, topological symmetry rule as the first principle of spin alignment in organic open-shell systems in the ground state, the proposal of organic through-bond 1D and 2D ferro- and superparamagnets and the detection of the first organic high-spin molecule, m-phenylenebis(phenylmethylene) in the quintet ground state (S = 2), followed by extended organic high-spin systems with π-conjugation such as aromatic hydrocarbons having S = 3, 4, 5. The paper also describes a theoretical approach to the understanding of electronic spin structures of organic high-spin molecules by invoking both Heisenberg and Hubbard model Hamiltonians, weakly interacting intramolecular high-spin systems from both experimental and theoretical sides, the spin density distribution of the first organic high-spin molecule in terms of electron- nuclear multiple resonance spectroscopy and the detection and characterization of ionic high-spin hydrocarbons, emphasizing the establishment of high spin chemistry underlying organic molecular magnetism.     

High-T c superconducting magnetic bearings for rotation-based devices

Summary A Modified-Melt-Powder-Melt-Growth (MMPMG) technique has been developed for the preparation of melt-textured Y-Ba−Cu−O pellets. To test their performances, the samples were characterized with respect to their microstructure, pinning strength and interaction force with permanent magnets. A superconducting magnetic bearing was built and integrated in a levitating flywheel system for energy storage. Paper presented at the “VII Congresso SATT?, Torino, 4–7 October 1994. Under a Fondazione Confalonieri grant.     

Nitrated polynuclear aromatic hydrocarbons in ambient air in Italy. A brief overview

When nitrated polynuclear aromatic hydrocarbons (NPAH) were recognised as long‐term toxic compounds and were also identified in several anthropogenic emissions and among the by‐products of photochemical smog they became objects of investigation in ambient air in both polluted and clean environments. In Italy the first investigations focussing on atmospheric NPAH were performed in the early eighties and encompassed both the canyon streets and dwelling areas of Rome. Because NPAH were indicated as markers of vehicle emission, new investigations were performed in other cities and also in rural and (nominally) unpolluted locations. In general, the first measurements of NPAH were episodic and could not be assumed to be strictly representative of the sites investigated. In contrast, nowadays consistent data bases on NPAH have been built up and are discussed in the technical literature, so that both neat concentrations and the yearly timed variation of the most important NPAH congeners have been measured in Italian air. Although concentrations of NPAH in air are usually much lower than those of PAH, owing to their very high potency in inducing mutations and tumours NPAH are regarded as having an important health impact on populations living in Italian urban areas. In this regard the genotoxicity of atmospheric aerosols is partly associated with nitrofluoranthenes and nitropyrenes whereas nitronaphthalenes and methylnitronaphthalenes seem to contribute to that of the gaseous organic fraction. Several civic and regional administrations are introducing control of atmospheric NPAH among ways of improving air quality in cities.