煤中有机硫形态结构和热解过程硫变迁特性的研究

利用热解 质谱并结合固定床热解反应装置，对煤中有机硫的形态主其对加氢热解过程 变迁特性的影响，进行了较系统的研究。结果表明，煤中有机硫的形态结构在褐煤中主要以脂肪族、芳香族硫化物为主，而在 煤中则主要以各种不同芳构化程度的噻吩结构为主，初步表明煤中有机硫形态结构随煤变质程度的变迁呈较强的连续递变性。煤热解过程中硫在呼产物中的变迁和分布与煤中有机硫的形态结构特点密切相关。较高芳构化噻吩结构不完全的氧     

Superoxes,high temperature universal phases in (GC)2

Most of the common classes of organic compounds chromatograph normally on Superoxes. There is no tailing or adverse effect from excessively different activity different activity coefficients. Superoxes are therefore universal phases for gas chromatography. This is also expressed by a wide useful temperature range from ～50° to ～300°. High MW Superox-4 has a MAOT about 20° higher than the lower MW Superox-0.1. Several applications illustrating the versatility of Superox phases in (GC)² are presented.     

Pure Organic Phase Phenol Biosensor Based on Tyrosinase Entrapped in a Vapor Deposited Titania Sol‐Gel Membrane

A novel amperometric biosensor was constructed for the determination of phenols in pure organic phase. This biosensor was fabricated by immobilizing tyrosinase in a titania sol‐gel membrane which was obtained with a vapor deposition method. This method was facile and avoided the calcination step needed in conventional titania sol‐gel process. The titania sol‐gel membrane could effectively retain the essential water layer around the enzyme molecule needed for maintaining its activity in organic phase. The experimental parameters such as solvent and operating potential were optimized. At ?100 mV this biosensor showed a good amperometric response to phenols in pure chloroform without any mediator and rehydration of the enzyme. For catechol determination the sensor exhibited a fast response of less than 5 seconds. The sensitivity of different phenols was as follows: catechol > phenol > p‐cresol. Additionally, the apparent Michaelis‐Menten constants of the encapsulated tyrosinase to catechol, phenol and p‐cresol were found to be 0.15±0.003, 0.17±0.008 and 0.21±0.004 mM, respectively. The biosensor had also good reproducibility and stability. This work provided a promising platform for the construction of pure organic phase biosensors and the determination of substrates with poor water solubility.     

The impact of polystyrene resins in solid-phase organic synthesis

Summary A major objective of the DIVERSOMER^® technology is to provide pure and characterized compounds for biological testing in order to prevent false negatives in our libraries. On several occasions, analysis of the final products by¹H-NMR and MS, has revealed by-products from the polystyrene solid support. Subsequently, three alternative methods were studied to remove polystyrene by-products; (i) prewashing of the resin prior to execution of the synthesis; (ii) pretreatment of the resin with the cleavage conditions consistent with the solid-phase synthesis reaction scheme; and (iii) parallel purification.     

Recognition of guests bearing donor and acceptor hydrogen bonding groups by heteroditopic calix[4]arene receptors

The synthesis of new hosts specifically designed for the recognition of neutral guests bearing donor-acceptor hydrogen bonding groups is described. These hosts are characterized by the presence of two distinct binding region in close proximity: the rigid π-donor cavity and the H-bond donor N-methylene-N′-phenylureido group inserted onto the upper rim of the calix[4]arene skeleton. The binding abilities of these receptors were investigated toward a series of neutral ditopic organic molecules in CDCl₃ solution by ¹H NMR spectroscopy. The results obtained show that rigidity of the calix[4]arene apolar cavity is the control element in determining efficiency. In fact, compared with the more rigid 2, host 10, where the rigidity of the cone structure is maintained by hydrogen bonding of the OH of the lower rim, a decrease of efficiency of almost one order of magnitude was observed. The cooperative effect of the two binding region of host 2 was verified with different classes of ditopic guests. Good efficiency in the recognition of urea derivatives and dimethylsulfoxide was achieved.     

离线超临界流体萃取和气相色谱/质谱联用对实验室内空气中气相有机污染物的测试

通过团体吸附剂富集，再用超临界ＣＯ２脱附后用气相色谱及质谱技术对实验室内空气中气相有机污染物进行了考察。文中对采样和萃取条件进行了优化，并与热脱附所得结果做了比较。结果表明在２２ＭＰａ，８０℃时，用甲醇改性的超临界ＣＯ２进行萃取的结果优于热脱附法。该法鉴定出气相有机污染物中５２个组分，占色谱峰总面积的９９．６％。     

气相色谱法测定饮料酒中的低沸点有机酸

在非质子极性溶剂-二甲基乙酰胺中,室温下用碘乙烷与C_1—C_6脂肪酸及乳酸的四甲基铵盐反应制备各酸相应的乙酯。乙酯在15%的邻苯二甲酸二壬酯与6%的土温-80混合固定液填充柱上获得满意分离。用本法测定饮料酒中的低沸点有机酸含量,简便、快速、准确。     

Molecular Recognition and Crystal Energy Landscapes: An X‐ray and Computational Study of Caffeine and Other Methylxanthines

We introduce a new approach to crystal‐packing analysis, based on the study of mutual recognition modes of entire molecules or of molecular moieties, rather than a search for selected atom–atom contacts, and on the study of crystal energy landscapes over many computer‐generated polymorphs, rather than a quest for the one most stable crystal structure. The computational tools for this task are a polymorph generator and the PIXEL density sums method for the calculation of intermolecular energies. From this perspective, the molecular recognition, crystal packing, and solid‐state phase behavior of caffeine and several methylxanthines (purine‐2,6‐diones) have been analyzed. Many possible crystal structures for anhydrous caffeine have been generated by computer simulation, and the most stable among them is a thermodynamic, ordered equivalent of the disordered phase, revealed by powder X‐ray crystallography. Molecular recognition energies between two caffeine molecules or between caffeine and water have been calculated, and the results reveal the largely predominant mode to be the stacking of parallel caffeine molecules, an intermediately favorable caffeine–water interaction, and many other equivalent energy minima for lateral interactions of much less stabilization power. This last indetermination helps to explain why caffeine does not crystallize easily into an ordered anhydrous structure. In contrast, the mono‐ and dimethylxanthines (theophylline, theobromine, and the 1,7‐isomer, for which we present a single‐crystal X‐ray study and a lattice energy landscape) do crystallize in anhydrous form thanks to the formation of lateral hydrogen bonds.     

PREPARATION OF CUO/γ-Al2O3 CATALYSTS FOR CATALYTIC COMBUSTION VOCS VIA PLASMA

CuO/γ-Al2O3 catalysts were prepared by plasma treatment and conventional impregnation methods. The catalytic combustion of two kinds of volatile organic compounds (VOCs), toluene and benzene, were carried out over these CuO/γ-Al2O3 catalysts. The surface properties of these catalysts were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The experimental results showed that in catalytic combustion the activity of the CuO/γ-Al2O3 catalyst prepared via plasma was much higher than that of the CuO/γ-Al2O3 catalyst prepared by conventional impregnation method. XRD results showed that an enhanced dispersion had been achieved with the plasma treatment. SEM results indicated that the size became much smaller and the surface became more uniform with the plasma treatment.