Inclusion of molybdenocene dichloride (Cp2MoCl2) in 2-hydroxypropyl- and trimethyl-β-cyclodextrin: Structural and biological properties

Organometallic-cyclodextrin inclusion compounds were obtained by the treatment of molybdenocene dichloride (Cp₂MoCl₂) with the modified cyclodextrins (CDs) heptakis-2,3,6-tri-O-methyl-β-CD (TRIMEB) and 2-hydroxypropyl-β-CD (HPβCD) in aqueous solution. The products were isolated by liophilisation and characterised in the solid-state by powder XRD, thermogravimetric analysis, Raman and FTIR spectroscopy, and ¹³C CP MAS NMR spectroscopy. The results are consistent with inclusion of Cp₂MoCl₂, rather than hydrolysis products such as [Cp₂Mo(H₂O)X]⁺ (X = Cl, OH) or [Cp₂Mo(H₂O)₂]²⁺. The pure non-included metallocene Cp₂MoCl₂ and its inclusion compounds with unmodified β-CD, TRIMEB and HPβCD were screened for their potential antiproliferative and cytotoxic activity, in both human cancer and healthy cell lines. Inclusion in CD was found to enhance the cytotoxic effect of Cp₂MoCl₂, with the TRIMEB adduct displaying the highest anti-tumour activity, along with the lowest toxicity towards non-neoplastic cells.     

Two-photon absorption in quadrupolar pi-conjugated molecules: influence of the nature of the conjugated bridge and the donor-acceptor separation

Quadrupolar-type substitution of pi-conjugated chromophores with donor and acceptor groups has been shown to increase their two-photon absorption (TPA) response by up to two orders of magnitude. Here, we apply highly correlated quantum-chemical calculations to evaluate the impact of the nature of conjugated bridge and the charge-transfer distance on that enhancement. We compare chromophores with phenylenevinylene-, thienylenevinylene-, polyene-, and indenofluorene-type backbones substituted by dimethylamino and cyano groups. In all compounds, we find a strongly TPA-active A(g) state (either 2A(g) or 3A(g)) in the low-energy region, as well as a higher lying TPA-active state (mA(g)) at close to twice the energy of the lowest lying one-photon allowed state; the smaller energy detuning in the mA(g) states results in very large TPA cross sections delta. We also investigate the influence of the degree of ground-state polarization on TPA. Independent of the nature of the backbone and the donor-acceptor separation, delta displays the same qualitative evolution with a maximum before the cyanine-like limit; the highest TPA cross sections are calculated for distirylbenzene- and polyene-based systems.     

5,7′-(亚甲胺基)-二-8-羟基喹啉的合成及其理论研究

以4-甲基苯磺酸作催化剂、用三乙胺调节pH值约为9的条件下, 由5-甲酰基-8-羟基喹啉和5-氨基-8-羟基喹啉合成了新的5,7′-(亚甲胺基)-二-8-羟基喹啉, 利用IR, UV, ¹H NMR, MS确认了分子结构, 比较研究了其光致发光特性, 运用Gaussian 98量子化学程序包, 采用B3LYP密度泛函(DFT)的方法, 在6-31G(d,p)水平上对分子的几何构型进行结构优化; 并对目标化合物的稳定结构通过计算预测其振动光谱, 计算结果与实验值基本相符.     

Structure-property modelling of complex formation of strontium with organic ligands in water

The method of substructural molecular fragments based on representation of the molecular graph by ensembles of fragments and involving calculations of those contributions to the given property is applied to the modelling of stability constants of the complexes of strontium(II) with organic ligands in water. Reliability of predictions of developed structure-property models was examined using three different test sets of structurally diverse ligands. The obtained models have been used for generation and screening of combinatorial library of virtual ligands. Some hypothetical efficient Sr(II) binders were suggested.     

A comparative study of the thermal reactivities of some transition metal oxalates in selected atmospheres

A comparative investigation has been made of the nonisothermal, solid-state thermal decompositions of the oxalates of six divalent transition metals (cations: manganese, iron, cobalt, nickel, copper and zinc) in alternative flowing atmospheres, inert (N₂, CO₂), reducing (H₂) and oxidizing (air). Derivative thermogravimetry (DTG) and differential scanning calorimetry (DSC) response peak maxima, providing a measure of reaction temperatures, have been used to determine salt reactivities and thus to characterize the factors that control the relative stabilities of this set of chemically related reactants. Two trends were identified. Trend (1): in the inert and reducing atmospheres, the decomposition temperature (salt stability) increased with rise in enthalpy of formation of the divalent transition metal oxide, MO. It is concluded that the rupture of the cation-oxygen (oxalate) bond is the parameter that determines the stability of salts within this set. Trend (2): the diminution of decomposition temperatures from values for reactions in inert/reducing atmosphere to those for reactions in an oxidizing atmosphere increased with the difference in formation enthalpy between MO and the other participating oxide (MO_3/2 or MO_1/2). The change of cation valence tended to promote reaction, most decompositions in O₂ occurred at lower temperatures, but the magnitude of the effect varied considerably within this set of reactants. Observed variations in stoichiometric and kinetic characteristics with reaction conditions are discussed, together with the mechanisms of thermal decompositions of these solid oxalates.This approach to the elucidation of crystolysis reaction mechanisms emphasizes the value of comparative investigations within the group of chemically related reactants. Previous isothermal kinetic studies had been made for each of the reactants selected here. From these, much has been learned about the form of the (isothermal) solid-state yield-time curves, often interpreted to provide information about the geometry of interface development for the individual rate processes. However, identification of the controls of reactivity, reaction initiation (nucleation) and advance (nucleus growth), is much more difficult to characterize and less progress has been made towards elucidation of the interface chemistry. The trends of reactivity changes with salt compositions, identified here, offer a complementary approach to that provided by the study of single salts. Much of the recent literature on thermal decompositions of solids has been concerned with individual reactants, but many results and conclusions are not presented in the widest possible perspective. Comparisons between systematically related reactants are identified here as providing a chemical context for the elucidation of the chemical steps that participate in interface reactions. The article advocates the use of a more chemical approach in investigations of crystolysis (solid-state chemical) reactions.     

A novel phosphoramidite method for automated synthesis of oligonucleotides on glass supports for biosensor development

Two protocols for functionalization of glass supports with hexaethylene glycol (HEG)-linked oligonucleotides were developed. The first method (standard amidite protocol) made use of the 2-cyanoethyl-phosphoramidite derivative of 4,4′-dimethoxytrityl-protected HEG. This was first coupled to the support by standard solid-phase phosphoramidite chemistry followed by extension with a thymidylic acid icosanucleotide. Stepwise addition of the linker phosphoramidite graduated at 1% (relative to the total sites available) perstep at 50°C resulted in an optimal yield of immobilized oligonucleotides at a density of 2.24 × 10¹⁰ strands/mm². This observed loading maximum lies well below the theoretical maximum loading owing to nonspecific adsorption of HEG on the glass and subsequent blocking of reactive sites. Surface loadings as high as 3.73 × 10¹⁰/mm² and of excellent sequence quality were achieved with a reverse amidite protocol. The support was first modified into a 2-cyanoethyl-N,N-diisopropylphosphoramidite analog followed by coupling with 4,4′-dimethoxytrityl-protected HEG. This protocol is conveniently available when using a conventional DNA synthesizer. The reverse amidite protocol allowed for control of the surface loading at values suitable for subsequent analytical applications that make use of immobilized oligonucleotides as probes for selective hybridization of sample nucleic acids of unknown sequence and concentration.     

Microwave-assisted conversion of N-substituted oxazolidin-2,4-diones into α-hydroxyamides

N-Substituted oxazolidin-2,4-diones have been synthesized in a novel one-pot reaction by reacting cyanohydrins stepwise with 1,1′-carbonyldiimidazole and primary amines followed by acidic hydrolysis of the intermediate 4-imino-oxazolidin-2-ones. Their microwave-assisted conversion into α-hydroxyamides was accomplished by treatment with catalytic amounts of sodium methoxide in methanol.     

Mechanism of the 2-ethyl-3-hydroxy-6-methylpyridinium 2-nitroxysuccinate reduction in nitrite-generating systems

1. Download : Download high-res image (99KB)
2. Download : Download full-size image

     

Pd(PPh3)2Cl2-CuCl体系催化有机高价碘杂环化合物与末端炔烃的化学选择性交叉偶联反应

以有机高价碘杂环化合物1,2为底物,在Pd(PPh3)2Cl2-CuCl催化剂存在下与末端炔烃进行交叉偶联反应,实验发现该反应为--化学选择性反应,控制反应体系的物料比、温度及反应时间可以分别得到单偶联或双偶联产物,从而证实了有机高价碘杂环化合物的碘盐在进行交叉偶联反应时的反应活性比sp2的碘化物高.     

An alternative efficient redox couple for the dye-sensitized solar cell system

A series of new cobalt complexes [Co(LLL)(2)X(2)] were synthesized and evaluated as redox mediators for dye-sensitized nanocrystalline TiO(2) solar cells. The structure of the ligand and the nature of the counterions were found to influence the photovoltaic performance. The one-electron-transfer redox mediator [Co(dbbip)(2)](ClO(4))(2) (dbbip = 2,6-bis(1'-butylbenzimidazol-2'-yl)pyridine) performed best among the compounds investigated. Photovoltaic cells incorporating this redox mediator yielded incident photon-to-current conversion efficiencies (IPCE) of up to 80%. The overall yield of light-to-electric power conversion reached 8 % under simulated AM1.5 sunlight at 100 W m(-2) intensity and more than 4% at 1000 W m(-2). Photoelectrodes coated with a 2 microm thick nanoporous layer and a 4 microm thick light-scattering layer, sensitized with a hydrophobic ruthenium dye, gave the best results.