基于三维简并四波混频的PDT光敏剂HA瞬态光栅特性研究

竹红菌甲素(hypocrellin A,HA)具有丰富的激发态特性,有可能在新型光动力疗法(PDT)光敏剂、激光染料和新型光电器件方面有一定的应用前景。利用瞬态光栅技术研究了竹红菌甲素分别在不同极性和粘度溶剂中以及溶剂本身的瞬态光栅特性,把其瞬态光栅的超快过程归结为竹红菌甲素质子转移形成的过渡态TS*的衰减,得出过渡态TS*瞬态光栅的寿命为10.5 ps。竹红菌甲素分子的质子转移过渡态TS*瞬态光栅寿命不受溶剂极性和粘度的影响。     

掺铥氟磷玻璃的结构、热学性质和光谱性质

制备了不同Al(PO3)3含量的掺铥系列氟磷玻璃,研究了其结构、热稳定性和光谱性质。随着Al(PO3)3含量的增加,该系列玻璃的密度降低,折射率增加,差热分析表明,转变温度、析晶起始温度、析晶峰温度和熔化温度增加。Al(PO3)3摩尔浓度在7%~9%时析晶稳定性最佳。采用归一化的拉曼光谱分析了材料的结构和声子状况,对于该系列氟磷玻璃,Al(PO3)3含量的增加不会影响声子能量,但使声子密度增大。测试了样品的吸收光谱,Tm3 的3H6→3F4在第三通信窗口的L波段有明显吸收。与在其它玻璃基质中相比,Tm3 的3F4能级对应能量偏高,3H4能级对应能量偏低,使得3H4→3F4跃迁波长较大,接近于增益迁移光纤放大器的放大波长。扎得奥菲而特(Judd-Ofelt)理论分析表明随着Al(PO3)3含量增加,离子强度参量Ω2增大,Ω6保持相对稳定,Tm3 的能级寿命降低。     

有机/无机复合功能材料倒脊型波导热光开关

利用溶胶-凝胶技术自主合成了一种具有优良光学特性和高热稳定性的有机/无机复合芯层材料.这种功能材料的分子中含有有机柔性侧链,可形成环氧交联.与无机SiO2-TiO2体系相比,具有较高的热光系数(量级为10-4/K),以及更好的成膜性和可加工性.通过与实验室自行配制的P(MMA-GMA)包层材料相匹配,设计制备了基于这种有机/无机复合功能材料的倒脊型波导马赫-曾德尔型热光开关.器件的波导与热电极性能良好.插入损耗为10dB,驱动功率15mW,开关时间小于1ms,消光比15dB.     

Spintronic properties of the Ti2CoB Heusler compound by density functional theory

The electronic structure and magnetic properties of the Ti₂CoB Heusler compound with a high-ordered CuHg₂Ti structure were investigated using the self-consistent full potential linearized augmented plane wave (FPLAPW) method within the density functional theory (DFT). Spin-polarized calculations show that the Ti₂CoB compound is half-metallic ferromagnetic with a magnetic moment of 2 μ_B at the equilibrium lattice constant, a=5.74 Å. The Ti₂CoB Heusler compound is ferromagnetic below the equilibrium lattice constant and ferrimagnetic above the equilibrium lattice constant. A large peak in majority-spin DOS and an energy gap in minority-spin DOS are observed at the Fermi level, yielding a spin polarization of 100%. A spin polarization higher than 90% is achieved for a wide range of lattice constants between 5.6 and 6.0 Å.     

两亲性壳聚糖基聚合物碳点的合成及其在载药方面的应用

通过水热法合成了系列具有高荧光量子产率（42.9%）辛基化壳聚糖基两亲性聚合物碳点荧光材料。利用红外光谱、紫外吸收光谱、光电子能谱、透射电镜、X射线衍射及荧光光谱对聚合物碳点进行了表征。以阿霉素为模型药物,研究了聚合物碳点对阿霉素的载药性能。当辛基取代度为76.42%时,其最大载药量和包封率分别为49.6%与47.4%。在磷酸盐缓冲液中,载药纳米胶束呈前期快速释放,后期缓慢释放的双相特征。将载药纳米胶束与鼻咽癌细胞作用,发现其存活率随着载药纳米胶束加入量的增加而降低,说明该纳米胶束对鼻咽癌细胞有一定的抑制作用。总之,该聚合物碳点材料在药物载体与荧光示踪方面有潜在的应用价值。     

Tunable charge density wave in TiS_3 nanoribbons

Recently, modifications of charge density wave(CDW) in two-dimensional(2D) show intriguing properties in quasi-2D materials such as layered transition metal dichalcogenides(TMDCs). Optical, electrical transport measurements and scanning tunneling microscopy uncover the enormous difference on the many-body states when the thickness is reduced down to monolayer. However, the CDW in quasi-one-dimensional(1D) materials like transition metal trichalcogenides(TMTCs) is yet to be explored in low dimension whose mechanism is likely distinct from their quasi-2D counterparts.Here, we report a systematic study on the CDW properties of titanium trisulfide(TiS_3). Two phase transition temperatures were observed to decrease from 53 K(103 K) to 46 K(85 K) for the bulk and 15-nm thick nanoribbon, respectively,which arises from the increased fluctuation effect across the chain in the nanoribbon structure, thereby destroying the CDW coherence. It also suggests a strong anisotropy of CDW states in quasi-1D TMTCs which is different from that in TMDCs.Remarkably, by using back gate of-30 V ～ 70 V in 15-nm device, we can tune the second transition temperature from110 K(at-30 V) to 93 K(at 70 V) owing to the altered electron concentration. Finally, the optical approach through the impinging of laser beams on the sample surface is exploited to manipulate the CDW transition, where the melting of the CDW states shows a strong dependence on the excitation energy. Our results demonstrate TiS_3 as a promising quasi-1D CDW material and open up a new window for the study of collective phases in TMTCs.     

Triboelectrification of granular insulating materials as affected by dielectric barrier discharge (DBD) treatment

The aim of this paper is to point out the influence of dielectric barrier discharge treatment on tribocharging of granular insulating materials. Particles of Polyvinyl Chloride (PVC) and Polypropylene (PP) were subjected to an AC dielectric barrier discharge (DBD) plasma treatment in ambient airprior to tribocharging in a vibratory device. The charge to mass ratio was measured for treated and untreated materials. Electrostatic separation of a mixture of granular materials (PVC and PP) to measure the effectiveness of DBD treatment was evaluated by processing treated and untreated PVC/PP granular mixtures in a free-fall electrostatic separator. The obtained results clearly indicate that DBD has the capability to influence surface charging proprieties of polymer granular materials. In case of short treatment time, typically less than 3 s, a marked increase in the charge to mass ratios was observed for both PVC (about 35%) and PP (roughly 45%). In the same way, the quantity of DBD-treated materials, recovered after electrostatic separation, was increased by about 104% and 30% for PVC and PP, respectively, as compared to untreated case. The DBD treatment time is a key factor to increase the tribo electric effect.     

恐龙不同部位化石的激光拉曼光谱

应用波长为785nm的激光拉曼光对来自武定九厂地区的两个不同部位的恐龙化石样品研究测试,首次在1000 cm-1~1800 cm-1波数段得到碳氢物质的拉曼峰图谱。在该波数范围内,颈椎化石和尾椎化石都有强、弱两类特征峰。它们的强特征峰与源地关系不大,即同一地区的化石特征峰并不很相似。弱拉曼峰与围岩的拉曼峰相似。恐龙化石的强拉曼峰来源于生物遗体分解剩下的碳氢类物质成分,弱拉曼峰源于石化过程中外部填充物质的成分。     

激光等离子体推进技术研究新进展

随着激光技术的发展，激光等离子体推进技术越来越来呈现出其独特的优势，现在已成为当前科学研究和推进领域的研究热点之一．文章对激光等离子体推进技术的应用以及目前的研究进展进行了总结．     

小角X射线散射应用研究若干进展

文章从小角X射线散射（small-ande X-ray scattering，SAXS）的理论分析出发，结合国内外SAXS理论和应用研究的最新动态，总结了文章作者所在的研究小组近年来在SAXS技术用于材料微结构表征方面的研究成果。主要包括以下三个方面的内容：（1）有机／无机杂化材料中电子密度波动的研究；（2）弦长度分布函数材料的周期结构的研究；（3）纳米粉末晶化过程的研究。