Sharp estimates in terms of moduli of smoothness for compound cubature rules

Summary In 1980 Dahmen-DeVore-Scherer introduced a modulus of continuity which turns out to reflect invariance properties of compound cubature rules effectively. Accordingly, sharp error bounds are derived, the existence of relevant counterexamples being a consequence of a quantitative resonance principle, established previously.     

A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

Electron spin resonance of diluted solid solutions of MnO2 in Y2O3

Electron spin resonance spectra of Mn²⁺ in diluted solid solutions of MnO₂ in Y₂O₃ have been studied at room temperature for Mn concentrations between 0.20 and 2.00 mol%. Isolated Mn²⁺ ions in sites with two different symmetries were observed, as well as Mn²⁺ ions coupled by the exchange interaction. The relative concentration of isolated to coupled Mn²⁺ ions decreases with increasing manganese concentration. The results are consistent with the assumption that the manganese ions occupy preferentially the C₂ symmetry sites. A theoretical calculation based on this model yields an effective range of the exchange interaction between Mn²⁺ ions of 0.53 nm, of the same order as that of Mn²⁺ ions in CaO.     

CsI(Tl)晶体中反冲Cs和I核Quenching?Factor的测量

许多实验对用CsI(Tl)闪烁晶体作为探测器来寻找和探测暗物质的可行性进行了研究.本工作利用8MeV单能中子轰击CsI(Tl)晶体探测器来研究Cs核和I核的QuenchingFactor.在数据处理中,运用脉冲形状甄别(PSD)方法来分辨反冲核信号和本底信号.实验结果表明,在7keV到132keV的能区中,Quench ingFactor随着反冲核能量的减少而增加.在探测暗物质的实验中,这一性质对于CsI(Tl)晶体探测器获得较低的能量阈值是很有利的.     

超临界流体触媒作用下石墨-金刚石转变

 研究了超临界流体CO₂在石墨-金刚石转变中的触媒作用。实验中，采用Ag₂O作为流体触媒的先驱材料，在7.7 GPa压力下，Ag₂O在1 200 ℃分解成Ag和O₂，O₂与石墨套管在高温高压下反应形成CO₂超临界流体。研究结果表明，在7.7 GPa和1 500 ℃以上温度条件下，石墨在CO₂流体触媒的作用下可转变为金刚石晶体，在1 500～1 700 ℃温度范围内合成出的金刚石具有完好的八面体形貌，与天然金刚石的生长特征非常相似。     

空心阴极灯激发的微波等离子体炬原子/离子荧光光谱研究--钙的原子/离子荧光光谱

用强短脉冲供电技术的空心阴极灯作激发源、微波等离子体炬作原子／离子化器，建立了原子／离子荧光光谱实验装置。详细研究了微波等离子体功率、观察高度、空心阴极灯电流等因素对原子／离子荧光信号强度的影响，测量了系统对Ca的原子／离子荧光光谱的检出限。     

Charge transport in a polypeptide chain

Charge transport is one important example of signal transduction in a protein which is responsible for action at a distance, and is a fundamental process in biochemical action. A model is presented in which electronic effects interact with motional processes to combine into a bifunctional model. This model is investigated with new detailed molecular dynamics calculations and successfully explains such action at a distance. Received 1st February 2002 / Received in final form 26 May 2002 Published online 13 September 2002     

静磁场伴随有静电场存在

阐述检测物体是否产生了电场的方法；通过实际检测证实立方体永磁体既产生了负静电场，也产生了正静电场，并测定了具体的场强．     

时间分辨光子计数系统的研究和应用

对由SPCM-AQR-14和MCS组成的时间分辨光子计数系统进行了研究,分析了SPCM和MCS的工作原理及主要特性.利用该系统对磷光物质和洋葱的延迟发光进行了测量,对它们的光子计数率曲线进行拟合,发现其光强衰减符合双曲线规律.     

A novel and efficient synthesis of porphine

meso-Tetra(n-hexyloxycarbonyl)porphyrin was found to be converted into porphine, the mother compound of porphyrins, in a 77% yield when heated in aqueous sulfuric acid at 180 °C over 30 min under an inert atmosphere. The observation demonstrates that the substituted porphyrin serves as a novel and useful precursor for porphine.