Surface‐enhanced Raman scattering characteristics of CuO : Mn/Ag heterojunction probed by methyl orange: effect of Mn2+ doping

Interest in the synthesis of hybrid substrates for surface‐enhanced Raman scattering (SERS) has surged recently. Hereof, in the present work, a hybrid SERS substrate CuO : Mn/Ag heterojunction has been synthesised. To accomplish this, the nanostructred Ag island film and CuO : Mn nanoparticles are synthesised by vacuum thermal evaporation method and sol–gel method respectively, and thereafter, a heterojunction between the CuO : Mn and Ag is fabricated by adsorption of CuO : Mn (10^‐3 m in ethanol) on Ag island film. Further, the SERS sensitivity of CuO : Mn/Ag heterojunctions has been studied by probing methyl orange. We observed that with Mn‐doping in the lattice of CuO, the SERS signal is enhanced considerably because of ferromagnetic ordering in CuO : Mn. DFT/B3LYP/6‐311 G(d, p) method is used to calculate the energy of HOMO and LUMO level of methyl orange. Copyright © 2016 John Wiley & Sons, Ltd.     

Enhancement of Fe3O4/Au Composite Nanoparticles Catalyst in Oxidative Degradation of Methyl Orange Based on Synergistic Effect

Enhancement of Fe₃O₄ /Au nanoparticles (Fe₃O₄ /Au NPs ) catalyst was observed in the oxidative degradation of methyl orange by employing H₂O₂ as oxidant. To evaluate the catalytic activity of Fe₃O₄ /Au nanoparticles, different degradation conditions were investigated such as the amounts of catalyst, H₂O₂ concentration and pH value. Based on our data, methyl orange was degraded completely in a short time. The enhanced catalytic activity and increased oxidation rate constant may be ascribed to synergistic catalyst‐activated decomposition of H₂O₂ to •OH radical, which was one of the strong oxidizing species. Besides, Fe₃O₄ /Au nanoparticles have exhibited satisfying recycle performance for potential industrial application.     

Electrochemical Study of 2,4‐Dinitrophenylhydrazine as Derivatization Reagent and Aldehydes at Carbon Glassy Electrode

A selective method based on derivatization with 2,4‐dinitrophenylhydrazine (DNPH) is described for the determination of several carbonyl compounds. The factors affecting the derivatization reaction of aldehyde and DNPH were investigated. The product of the derivatization reaction has been characterized by UV/Vis spectrophotometry, NMR, infrared spectroscopy and cyclic voltammetry. Then, an electrochemical study for the determination of aldehyde‐2.4‐dinitrophenylhydrazone was performed at glassy carbon electrode (GCE) using square wave voltammetry (SWV). After the optimization of experimental parameters, the limits of detection (at 3σ ) obtained for all aldehyde‐2,4‐DNPH were varied from 15.82 to 78.39 μmol L⁻¹ and relative standard deviations were between 1.8 and 4.5%. Finally, the proposed method was applied to determine the aldehydes concentration in drinking water and orange juice samples with satisfactory results.     

加热方式及原料配比对介孔CeO_2结构及其光催化性能的影响

以P123(聚环氧乙烷-聚环氧丙烷-聚环氧乙烷三嵌段共聚物)为模板剂,Ce(NO_3)_3为反应原料,通过考察加热方式、加热温度、原料配比等因素,合成了结构性能较好、表面羟基含量较高的介孔CeO_2材料。利用XRD,N_2吸附-脱附,TEM,Raman,FT-IR等技术对合成样品的结构性能进行了表征,结果表明,当P123与Ce(NO_3)_3物质的量之比为1∶10,在110℃水热下合成的CeO_2结构性能最好。以酸性橙7(AO7)为探针分子,对合成介孔CeO_2的光催化性能进行评价。光催化结果证明,由于表面羟基含量较高、介孔及氧缺位的形成,所合成结构性能较好的CeO_2,利用可见光可彻底催化降解溶液中的AO7。     

Comparison of sample preparation methods for the ICP-AES determination of minor and major elements in clarified apple juices

Inductively coupled plasma atomic emission spectrometry (ICP-AES) was used for the determination of minor and major elements present in apple juices. Prior to ICP-AES measurement, samples were diluted with nitric acid or digested in a microwave assisted digestion system. The differences in the measured element concentrations after application of different types of sample preparation procedures are discussed. The direct measurement compared to closed microwave dissolution was found to be the best sample preparation procedure. Prior to the measurements the ICP-AES method was validated and optimized for the determination of elements in apple juices. For diluted apple juice samples the lowest limits of detection (LOD) were obtained for Ba and Cd (< 20 μg L^{− 1}), moderate ones for Cu, Mn, Ni, Fe, Ag, Ca, Cr, Zn, Mg, and Sr (20–100 μg L^{− 1}), and the highest LODs for K, Pb, Na, and Al (> 110 μg L^{− 1}). The results obtained for the repeatability (< 0.9%), the intermediate precision (< 4.5%), the day-to-day reproducibility (< 5.2%), and the overall uncertainty of measurement (approx. 4–7%) for all elements analyzed demonstrated the good applicability of the proposed method. Differences in major element content in fresh and commercial apple juice are discussed.     

粒径可控的纳米铁酸铋的制备及其光催化性能

采用改进的聚丙烯酰胺凝胶法制备了BiFeO3纳米颗粒,利用热重-差热、红外光谱及X射线衍射等手段研究了干凝胶的热分解及BiFeO3的成相过程.结果表明,在600℃煅烧可制备出高纯的BiFeO3纳米颗粒.同时发现,随着双丙烯酰胺含量的增加,所得样品晶粒尺寸逐渐减小,从而制备出平均粒径约52～110nm的系列BiFeO3颗...     

单斜BiVO4可见光催化降解甲基橙的形貌效应

以硝酸铋和偏钒酸铵为无机源,NaOH为pH值调节剂,三嵌段共聚物P123为表面活性剂,采用醇-水热法制备了多种形貌的单斜BiVO4.利用X射线衍射、N2吸脱附、扫描电子显微镜、X射线光电子能谱和紫外可见光漫反射等技术表征了其物化性质,并考察了这些BiVO4样品在可见光照射下降解甲基橙的催化活性.结果表明,表面活性剂和溶...     

稀土Ce掺杂对ZnO结构和光催化性能的影响

采用共沉淀-焙烧法合成了一系列不同含量的稀土Ce掺杂的ZnO光催化剂. 利用傅里叶变换红外(FT-IR)光谱、粉末X射线衍射(XRD)、扫描电镜(SEM)、紫外-可见(UV-Vis)光谱、光致发光(PL)谱等技术对所制备的光催化剂进行了系列表征. 以酸性橙II脱色降解为模型反应, 考察了掺杂不同含量的铈及不同焙烧温度对ZnO的物理结构和光催化脱色性能的影响. 结果表明: 掺入质量分数(w)为2%的铈可以明显改善氧化锌表面状态, 有利于产生更多的表面羟基; 同时可以抑制光生电子与光生空穴(e^-/h⁺)的复合, 显著提高光催化脱色活性和光催化稳定性; 焙烧温度对光催化剂的晶体结构、表面性能和光催化活性产生较大影响, 500 °C的焙烧处理使样品的结晶度较高, 同时催化剂颗粒粒径较细, 表面具有丰富的羟基. 但过高的焙烧温度(600-800 °C)将导致催化剂的物理结构发生恶化, 降低光催化性能.     

静电自组装制备纳米TiO2/SiO2光催化材料

采用静电自组装方法制备了纳米TiO2/SiO2光催化材料。采用巯丙基三甲氧基硅烷偶联剂对SiO2进行干法改性,采用双氧水/冰醋酸将偶联剂巯基基团氧化为磺酸基基团。在正负电荷的吸引下,带负电荷的SiO2与带正电荷的钛聚合阳离子自发地组装在一起,经一定温度热处理得到纳米TiO2/SiO2光催化材料。采用XRD、FTIR、PL、UV-Vis DRS、SEM和ICP等对材料进行了分析和表征。采用甲基橙溶液评价材料的光催化性能。结果表明:SiO2促使锐钛矿的形成,抑制锐钛矿向金红石的转变,减小TiO2的晶粒尺寸,使得TiO2光吸收波长发生蓝移。TiO2与SiO2通过Si-O-Ti键发生结合。采用静电自组装方法制备的材料中TiO2的含量高于传统方法,导致材料的光催化性能有所提高。     

Enhanced Visible‐Light‐Induced Photoelectrocatalytic Degradation of Methyl Orange by CdS Sensitized TiO2 Nanotube Arrays Electrode

In this work, CdS sensitized TiO₂ nanotube arrays (CdS/TiO₂NTs) electrode was synthesized with the CdS deposition on the highly ordered titanium dioxide nanotube arrays (TiO₂NTs) by sequential chemical bath deposition method (S‐CBD). The as‐prepared CdS/TiO₂NTs was characterized by field‐emission scanning electron microscopy (FE‐SEM) and X‐ray diffraction (XRD). The results indicated that the CdS nanoparticles were effectively deposited on the surface of TiO₂NTs. The amperometric I‐t curve on the CdS/TiO₂NTs electrode was also presented. It was found that the photocurrent density was enhanced significantly from 0.5 to 1.85 mA/cm² upon illumination with applied potential of 0.5 V at the central wavelength of 253.7 nm. The photoelectrocatalytic (PEC) activity of the CdS/TiO₂NTs electrode was investigated by degradation of methyl orange (MO) in aqueous solution. Compared with TiO₂NTs electrode, the degradation efficiencies of CdS/TiO₂NTs electrode increased from 78% to 99.2% under UV light in 2 h, and from 14% to 99.2% under visible light in 3 h, which was caused by effective separation of the electrons and holes due to the effect of CdS, hence inhibiting the recombination of electron/hole pairs of TiO₂NTs.