BiOI/Bi_2WO_6对甲基橙和苯酚的光催化降解及光催化机理(英文)

采用简单的沉积方法制备了不同碘化氧铋含量的BiOI/Bi2WO6光催化剂,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HR-TEM)、紫外-可见漫反射光谱(UV-Vis DRS)和BET比表面积测量对其进行了表征。在紫外和可见光的照射下,使用甲基橙和苯酚的光催化降解评价了BiOI/Bi2WO6催化剂的光催化性能。结果表明:与商业P25和纯Bi2WO6相比,13.2%BiOI/Bi2WO6光催化剂具有更高的紫外和可见光催化性能。这明显增加的光催化活性主要归功于光生电子和空穴在Bi2WO6和BiOI界面上的有效转移,降低了电子-空穴对的复合。基于BiOI和Bi2WO6的能带结构,提出了光生载流子的一种转移过程。自由基清除剂的实验表明,·OH,h+,·O2-和H2O2,特别是h+,共同支配了甲基橙和苯酚的光催化降解过程。     

改进的微波辅助无溶剂法提取薄荷和陈皮中的挥发油组分

An improved solvent free microwave extraction, in which a kind of microwave absorption medium （carbonyl iron powder） was used, was applied to the extraction of essential oil from dried menthol mint and orange peel without addition of any solvent and pretreatment. It took much less time of extraction （30 min） than microwave-assisted hydrodistillation （90 min） and conventional hydrodistillation （180 min）. The kinds of chemical compositions in essential oil extracted by different methods were almost the same and such improved solvent free microwave extraction can be a feasible way in extraction of essential oil from dried plant materials.     

Properties and Photoelectrocatalytic Behaviour of Sol-Gel Derived TiO2 Thin Films

Titanium dioxide (TiO₂) thin films have been prepared on indium doped tin oxide (ITO) glass by sol-gel dip-coating method. Properties of the films were determined as a function of heat-treatment by X-ray diffraction, scanning electron microscopy and photoelectrochemical tests. The films heat-treated at higher temperatures show better crystallinity and photoresponse. The microscopic structure on the film after heat-treatment is attributed to the incorporation of organic polymer into the precursor solution. The performance of the electrodes treated at different temperature on photoelectrocatalytic degradation of methyl orange was investigated. The effect of applied potential and the ability of the electrode to be repeatedly used in photoelectrocatalytic degradation were also evaluated.     

萃取分光光度法测定废烟末中的尼古丁

本文在ｐＨ４．５的乙酸－乙酸钠缓冲溶液中，使烟碱与甲基橙生成稳定的黄色络合物，然后用二氯甲烷萃取。于λｍａｘ＝４３５ｎｍ处测定有机相的吸光度，烟碱浓度在０－６５μｇ／５ｍＬ范围内符合比尔定律，摩尔吸光系数为９．８％１０＾３Ｌ．ｍｏｌ＾－＾１．ｃｍ＾－＾１。方法快速，简便，应用于烟草中烟碱的定量分析，其加标回收率在８１－１０９％之间，相对标准偏差小于４．１％。     

Determination of fluoride in complex liquid matrices by electrothermal atomic absorption spectrometry with in-furnace oxygen-assisted ashing

A new chemical method is reported for the determination of total fluoride in complex liquids and suspensions, such as fruit juices, urine, serum and blood. It is based on the formation of the A1F radical in a graphite furnace afterin situ oxygen-assisted ashing of the untreated sample. The absorbance of this radical is measured at 227.45 nm. The method is relatively easy to use and provides a low detection limit (14 ng/ml) and reasonable reproducibility (5–10%).     

疏水相互作用对阳离子聚电解质与染料键合的影响

用平衡渗析法研究了阳离子聚电解质PAm·MG 和P(St-Am·MG)与甲基橙(MO)及P(St-Am·MG)与MO的同系物乙基橙(EO)、橙武Ⅳ(O-Ⅳ)在25、35、45和55 ℃下相互作用的热力学. 由K1otz方程, 求得键合常数K_1和热力学参数ΔG、ΔH及ΔS. 含疏水基的P(St-Am·MG)与MO的键合能力比不含疏水基的PAm·MG 强. P(St-Am·MG)与不同染料作用时, 键合程度为O-Ⅳ>EO>MO, 即染料的疏水性越强, 与高聚物的作用程度越大.键合体系加入脲或甲醇, 疏水相互作用受到破坏, 导致高聚物与染料之间的键合受到削弱.     

荧光可逆调控研究CdTe量子点-吖啶橙-小牛胸腺DNA的相互作用及分析应用

水相合成了谷胱甘肽(GSH)修饰的CdTe 量子点(QDs). 在PH＝7.4的Tris-HCl缓冲溶液中, 吖啶橙(AO)通过静电引力吸附到GSH-CdTe QDs 的表面, 与GSH-CdTe QDs形成了基态复合物, 导致GSH-CdTe QDs的荧光猝灭. 在GSH-CdTe QDs-AO体系中加入小牛胸腺DNA (ctDNA), ctDNA诱导AO从GSH-CdTe QDs表面脱落嵌入其双螺旋结构中, 导致GSH-CdTe QDs的荧光恢复. 根据GSH-CdTe QDs荧光的猝灭和恢复, 实现了量子点荧光的可逆调控. ctDNA引起GSH-CdTe QDs-AO体系荧光恢复强度与ctDNA浓度成良好的线性关系, 检出限为0.13 ng•mL^－1, 据此提出了简便快捷、准确、高灵敏测定ctDNA的新方法. 还结合共振瑞利散射(RRS)光谱、吸收光谱和原子力显微镜照片研究了GSH-CdTe QDs-AO-ctDNA三者之间的相互作用, 对相互作用机理进行了讨论并提出了相应的作用模型.     

Enhanced Visible‐Light‐Induced Photoelectrocatalytic Degradation of Methyl Orange by CdS Sensitized TiO2 Nanotube Arrays Electrode

In this work, CdS sensitized TiO₂ nanotube arrays (CdS/TiO₂NTs) electrode was synthesized with the CdS deposition on the highly ordered titanium dioxide nanotube arrays (TiO₂NTs) by sequential chemical bath deposition method (S‐CBD). The as‐prepared CdS/TiO₂NTs was characterized by field‐emission scanning electron microscopy (FE‐SEM) and X‐ray diffraction (XRD). The results indicated that the CdS nanoparticles were effectively deposited on the surface of TiO₂NTs. The amperometric I‐t curve on the CdS/TiO₂NTs electrode was also presented. It was found that the photocurrent density was enhanced significantly from 0.5 to 1.85 mA/cm² upon illumination with applied potential of 0.5 V at the central wavelength of 253.7 nm. The photoelectrocatalytic (PEC) activity of the CdS/TiO₂NTs electrode was investigated by degradation of methyl orange (MO) in aqueous solution. Compared with TiO₂NTs electrode, the degradation efficiencies of CdS/TiO₂NTs electrode increased from 78% to 99.2% under UV light in 2 h, and from 14% to 99.2% under visible light in 3 h, which was caused by effective separation of the electrons and holes due to the effect of CdS, hence inhibiting the recombination of electron/hole pairs of TiO₂NTs.     

Synthesis of Nano‐Sized Zinc Oxide Photocatalyst by Combustion Method

The objective of this research was to use combustion synthesis to create a nano‐sized ZnO photocatalyst using citric acid as the fuel and zinc nitrate as the oxidant. The starting materials were mixed in a stoichiometric ratio, and a slurry precursor with high homogeneity was formed. The precursor was ignited at room temperature, resulting in dry, loose, and voluminous ZnO powders. The powders, characterized by SEM, TEM and XRD, showed a particle size range of 40 to 80 nm with a wurtzite structure. The ZnO powders were introduced as a photocatalyst for the degradation of methyl orange, which was adopted as a model compound. UV light (6W) was used as the irradiation source to induce synthesized ZnO powders to perform catalytic activity. The photocatalytic reaction was executed in 40 mL of a 10 ppm methyl orange aqueous solution under 254 nm UV illumination. In this work, it was observed that both UV light and ZnO powders are needed for the photocatalytic reaction. In addition, it was found that increasing the amount of ZnO powder present in the MO (methyl orange‐C₁₄H₁₄N₃NaO₃S) solution did not correlate directly with an increase in photocatalytic ability. It was found that the scattering problem of UV light also needs to be considered. The optimized photocatalytic degradation ratio in this work reached 92.7%.