Single Supplier Scheduling for Multiple Deliveries

The problem of scheduling the production and delivery of a supplier to feed the production of F manufacturers is studied. The orders fulfilled by the supplier are delivered to the manufacturers in batches of the same size. The supplier's production line has to be set up whenever it switches from processing an order of one manufacturer to an order of another manufacturer. The objective is to minimize the total setup cost, subject to maintaining continuous production for all manufacturers. The problem is proved to be NP-hard. It is reduced to a single machine scheduling problem with deadlines and jobs belonging to F part types. An O(NlogF) algorithm, where N is the number of delivery batches, is presented to find a feasible schedule. A dynamic programming algorithm with O(N ^F /F ^F–2) running time is presented to find an optimal schedule. If F=2 and setup costs are unit, an O(N) time algorithm is derived.     

Preparation and characterization of biodegradable magnetic carriers by single emulsion-solvent evaporation

This paper describes a single emulsion-solvent evaporation protocol to prepare PEGylated biodegradable/biocompatible magnetic carriers by utilizing hydrophobic magnetite and a mixture of poly(D,L lactide-co-glycolide) (PLGA) and poly(lactic acid-block-polyethylene glycol) (PLA-PEG) (26:1 by mass) polymers. We characterized the magnetic microspheres in terms of morphology, composite microstructure, size and size distribution, and magnetic properties. Results show that the preparation produces magnetic microspheres with a good spherical morphology, small size (mean diameter of 1.2–1.5 μm) by means of large size distributions, and magnetizations up to 20–30 emu/g of microspheres.     

Three-dimensional photofabrication with femtosecond lasers for applications in photonics and biomedicine

A status report on rapidly advancing femtosecond laser technology, three-dimensional (3D) microstructuring by multiphoton illumination technique, is given. Taking its origin from multiphoton microscopy, this technique is now becoming an important microfabrication tool. In our work we apply near-infrared Ti:sapphire femtosecond laser pulses (at 800/780 nm) for 3D material processing. When tightly focused into the volume of a photosensitive material (or photoresist), they initiate 2PP process by, for example, transferring liquid into the solid state. This allows the fabrication of any computer generated 3D structure by direct laser “recording” into the volume of photosensitive material. 2PP of photosensitive materials irradiated by femtosecond laser pulses is now considered as enabling technology for the fabrication of 3D photonic crystals and photonic crystal templates. In particular, 2PP allows one to introduce defects at any desired locations, which is crucial for the practical applications. Recently, we studied possible applications of 2PP technique in biomedicine. 2PP is a very interesting technique for the fabrication of drug delivery systems, scaffolds for tissue engineering, and medical implants. These and other biomedical applications of 2PP will be reviewed.     

Lactic acid‐ and carbonate‐based crosslinked polymeric micelles for drug delivery

Our objective was to synthesize and evaluate lactic acid‐ and carbonate‐based biodegradable core‐ and core‐corona crosslinkable copolymers for anticancer drug delivery. Methoxy poly(ethylene glycol)‐b‐poly(carbonate‐co‐lactide‐co‐5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxane‐2‐one) [mPEG‐b‐P(CB‐co‐LA‐co‐MAC)] and methoxy poly(ethylene glycol)‐b‐poly(acryloyl carbonate)‐b‐poly(carbonate‐co‐lactide) [mPEG‐b‐PMAC‐b‐P(CB‐co‐LA)] copolymers were synthesized by ring‐opening polymerization of LA, CB, and MAC using mPEG as an macroinitiator and 1,8‐diazabicycloundec‐7‐ene as a catalyst. These amphiphilic copolymers which exhibited low polydispersity and critical micelle concentration values (0.8–1 mg/L) were used to prepare micelles with or without drug and stabilized by crosslinking via radical polymerization of double bonds introduced in the core and interface to improve stability. mPEG₁₁₄‐b‐P(CB₈‐co‐LA₃₅‐co‐MAC_2.5) had a higher drug encapsulation efficiency (78.72% ± 0.15%) compared to mPEG₁₁₄‐b‐PMAC_2.5‐b‐P(CB₉‐co‐LA₃₉) (20.29% ± 0.11%).¹H NMR and IR spectroscopy confirmed successful crosslinking (～70%) while light scattering and transmission electron microscopy were used to determine micelle size and morphology. Crosslinked micelles demonstrated enhanced stability against extensive dilution with aqueous solvents and in the presence of physiological simulating serum concentration. Furthermore, bicalutamide‐loaded crosslinked micelles were more potent compared to non‐crosslinked micelles in inhibiting LNCaP cell proliferation irrespective of polymer type. Finally, these results suggest crosslinked micelles to be promising drug delivery vehicles for chemotherapy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Determining binding constants for 1:1 and 1:2 inclusion complexes of ester betulin derivatives with (2-hydroxypropyl)-β-cyclodextrin by affinity capillary electrophoresis

The complexation of ester betulin derivatives with (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD) was studied by mobility shift affinity CE. Electrophoretic mobility for triangular peaks was calculated using the parameter a₁ of the Haarhoff–Van der Linde function instead of the peak top time. Dependences of the viscosity corrected electrophoretic mobility on HP-β-CD concentration were not described on the basis of only complexes with 1:1 stoichiometry due to the fact that these binding curves did not reach a plateau. However, the dependences were well described taking into account both 1:1 and 1:2 complexes. The presence of higher order equilibria was also revealed by x-reciprocal plots. The values of apparent binding constant logarithm, obtained for the first time, for 1:1 and 1:2 HP-β-CD complexes of betulin 3,28-diphthalate and betulin 3,28-disuccinate with 95% confidence interval limits in brackets are the same within error and are equal to 4.85 (4.73–4.95), 8.56 (7.75–8.82), 4.92 (4.86–4.97), and 8.54 (8.23–8.72) at 25°C, respectively. These values for 1:1 and 1:2 HP-β-CD complexes of betulin 3,28-disulfate at 25°C are 4.61 (4.57–4.64) and 7.11 (6.57–7.34), respectively. The binding constants for betulin 3,28-disulfate agree with the previously obtained results from the separation in the thermostatted capillary segment.     

Triazine Dendrimers for Drug Delivery: Evaluation of Solubilization Properties,Activity in Cell Culture,and In Vivo Toxicity of a Candidate Vehicle

Three criteria are evaluated to assess the potential of a dendrimer based on triazines, 1, for use as a vehicle for drug delivery. These criteria are: (1) its ability to solubilize small hydrophobic guests as measured spectrophotometrically; (2) its ability to deliver a drug in vitro as evaluated using a gene reporter assay; and (3) its in vivo toxicity in mice as determined by autopsy and screens of liver and kidney function. Vehicle 1 solubilizes pyrene to a similar extent to dendrimers based on poly(arylether)s, 4, encapsulating approximately 0.2 molecules of pyrene per dendrimer. This activity is approximately 10-fold greater than that of the more polar poly(propyleneimine) and poly(amidoamine) dendrimers, 2 and 3. Gas-phase computational models reveal that both 1 and 4 have cores that are accessible to solvent, suggesting that these dendrimers can occupy much greater volumes than 2 and 3 whose cores are confined toward the interior of the structure. Electrostatic potential maps can be used to rationalize differences in solubilization between 1 and 4. Precipitation results from mixing cationic 1 with the anionic indomethacin, but not with methotrexate, suggesting that the composition of the drug may dictate the scope of delivery applications. Dendrimer 1 solubilizes 10-hydroxycamptothecin and a novel bisindolemethane; approximately four and five molecules of drug per dendrimer are solubilized, respectively. In cell-culture experiments using a luciferase reporter gene assay, the dendrimer:bisindolemethane conjugate shows comparable activity to the bisindolemethane delivered in aqueous DMSO, suggesting that the dendrimer does not preclude delivery of the molecule to an intracellular target. Preliminary toxicology studies of 1 in mice show that this molecule has no adverse toxicity to the kidneys or the liver in single doses delivered intraperitoneally up to 10?mg/kg.     

Fusion Wheat Histone H4 Protein Increases Transfection Efficiency of Non-viral DNA Vector

The lack of efficient and non-toxic gene delivery, preferably with non-viral DNA vectors, is generally regarded as a major limitation for gene therapy. In this study, a wheat histone H4 gene was cloned from Triticum aestivum, sequenced, modified and expressed in E. coli. The wheat histone H4 gene and reconstructed H4TL gene encoded wheat histone H4 and a recombinant protein of 141 amino acids with an approximate molecular weight of 15500. Gel electrophoresis mobility shift assays demonstrated that the purif...