Membrane introduction mass spectrometry

An overview of membrane introduction mass spectrometry (MIMS) is presented and comparisons are made with other direct sample introduction techniques. Special attention is given to the unique advantages and the limitations of newer variants on the MIMS technique, including affinity MIMS, reverse-phase and trap MIMS. The salient features of the interfaces used in MIMS are summarized and the various membrane materials commonly used are delineated. The applicability of MIMS is illustrated via discussion of

1. (i) bioreactor monitoring (represented by yeast fermentation),

2. (ii) environmental monitoring (illustrated by analysis of contaminated ground water samples) and

3. (iii) on-line chemical reaction monitoring (exemplified by the photolysis of aryl esters).

The applicability of MIMS to the analysis of environmental samples, including complex mixtures in water, air and soil, is noted.     

激光除锈过程的实时监测技术研究

对激光除锈过程中的实时监测技术进行了实验研究,结果表明:除锈过程中产生的声波强度会随着表面清洁度的变化而发生明显的变化,声波信号包含了除锈过程中的大量信息,可作为激光除锈实时监测的基本信号.     

Monitoring the packet gap of real-time packet traffic

Real-time packet traffic is characterized by a strict deadline on the end-to-end time delay and an upper bound on the information loss. Due to the high correlation among consecutive packets, the individual packet loss does not well characterize the performance of real-time packet sessions. An additional measure of packet loss is necessary to adequately assess the quality of each real-time connection. The additional measure considered here is the average number of consecutively lost packets, also called the average packet gap. We derive a closed form for the average packet gap for the multiclassG/G/m/B queueing system in equilibrium and show that it only depends on the loss behavior of two consecutive packets. This result considerably simplifies the monitoring process of real-time packet traffic sessions. If the packet loss process is markovian, the consecutive packet loss has a geometric distribution.     

New fluorescence probes for monitoring the kinetics of laser-initiated polymerization

Several new fluorescence probes useful for following photopolymerization have been characterized. Among these are probes which can be used in rapidly gelling monomer mixtures and for photochemical polymerization initiated by very high laser powers. Systems which can be used with polyolacrylates and either with visible initiators or with UV initiators are reported. © 1993 John Wiley & Sons, Inc.     

遥感傅里叶变换红外光谱的大气层析技术

遥感傅里叶变换红外光谱层析技术是一项新的气体分析技术，它可用于构造气体浓度峰图形，定量分析工业污染气体总释放量等方面，随着算法的不断优化，在重构气体在空间的分布方面，遥感傅里叶变换红外光谱层析技术正在不断成长。     

Automatic detection and identification of shocks in Gaussian state‐space models: a Bayesian approach

An automatic monitoring and intervention algorithm that permits the supervision of very general aspects in an univariate linear Gaussian state–space model is proposed. The algorithm makes use of a model comparison and selection approach within a Bayesian framework. In addition, this algorithm incorporates the possibility of eliminating earlier interventions when subsequent evidence against them comes to light. Finally, the procedure is illustrated with two empirical examples taken from the literature. Copyright © 2005 John Wiley & Sons, Ltd.     

在线滤波技术在光纤马赫-德尔交叉复用器中的应用

为构造出与理想梯形滤波器接近的滤波形状，在单级光纤马赫-德尔交叉复用器的基础上，引入在线滤波技术；通过增加干涉级数和调整2对干涉臂的干涉长度和耦合器的耦合比，实现了逼近宽带陡沿的滤波输出。通过与梯形滤波器傅里叶展开式的比较，计算得到了器件的最佳参数，器件的滤波性能以及温度稳定性相对于单级结构得到了明显提高。根据理论计算，成功制作出通道间隔为50GHz的样品器件。其输出为-0.5dB，带宽大于0.185nm，相邻通道隔离度大于30dB，满足了DWDM系统指标要求。     

分辨率为1pm的波长监测新方法

在亚毫米尺度金属包覆波导研究基础上，提出了一种波长监测的新方法.实验采用自由空间耦合技术，激发了波导中对波长变化十分灵敏的超高阶导模，并以此为探针，实现了1pm波长漂移的监测. 关键词： 波长监测 金属包覆波导 超高阶导模     

Progress in the quality assurance of environmental trace organic analysis

An overview is given on the stepwise learning programmes undertaken to identify the main sources of error associated with the determination of the mandatory organic contaminants in the marine monitoring programmes. Details are given on the preparation and use of LRMs and CRMs to maintain analytical control and quantify the laboratory errors in relation to the measurement of changes in the environment.     

In‐line monitoring of UV photopolymerization with a quartz crystal resonator

An in‐line monitoring device using a quartz crystal resonator for thin film polymerization was proposed, and its performance has been evaluated by implementing in the UV polymerization of 2‐hydroxyethyl methacrylate with a photoinitiator of 1‐chloroanthraquinone. Because the variation of resonant resistance of the resonator is proportional to the square root of viscosity change that is closely related to the polymerization degree, the resistance can be used as a measure of the polymerization degree. The resistance measurements were compared with the outcome of instrumental analyses of polymerization degree using an FTIR spectrometer and a gel permeation chromatograph. The experimental results showed that the resistance measurements were consistent with the experimental outcome of the instrumental analyses, and this indicates the effectiveness of the proposed device. Owing to the simplicity and availability of the resonator system, its wide utilization in the monitoring of a variety of film polymerization processes, including photoresistor application, is expected. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2428–2439, 2006