垂直上升管内液体横掠流动传热特性研究

本文对单相水和单相油横掠流动时的平均换热特性进行了实验研究,对试验的结果进行了分析和讨论,并对实验数据进行关联,得到了垂直上升管内单相水和单相油横掠流动时的换热准则关系式。结果表明,狭窄空间条件下的液体横掠柱体时的流动换热对液相Re数的依赖,较大空间条件下的流动换热相比明显减小,并对单相水和单相油横掠流动时的换热性能进行了比较。     

A density functional theory computational study of the role of ligand on the stability of CuI and CuII species associated with ATRP and SET‐LRP

Atom transfer radical polymerization (ATRP) and single electron‐transfer living radical polymerization (SET‐LRP) both utilize copper complexes of various oxidation states with N‐ligands to perform their respective activation and deactivation steps. Herein, we utilize DFT (B3YLP) methods to determine the preferred ligand‐binding geometries for Cu/N‐ligand complexes related to ATRP and SET‐LRP. We find that those ligands capable of achieving tetrahedral complexes with Cu^I and trigonal bipyramidal with axial halide complexes with [Cu^IIX]⁺ have higher energies of stabilization. We were able to correlate calculated preferential stabilization of [Cu^IIX]⁺ with those ligands that perform best in SET‐LRP. A crude calculation of energy of disproportionation revealed that the same preferential binding of [Cu^IIX]⁺ results in increased propensity for disproportionation. Finally, by examining the relative energies of the basic steps of ATRP and SET‐LRP, we were able to rationalize the transition from the ATRP mechanism to the SET‐LRP mechanism as we transition from typical nonpolar ATRP solvents to polar SET‐LRP solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4950–4964, 2007     

Study on the Photophysical Process in N-Phenyl Phenothiazine and N-(2-Pyridine) Phenothiazine

By the measurements of the solvent and temperature effects of the fluorescence emission spectra and lifetime of N-phenyl phenothiazine (PHZ) and N-(2-pyridine) phenothiazine (PYZ),the existence of strongly twisted intramolecular charge transfer (TICT) state in PYZ emission spectra is proved.The exciplex formed by PHZ, PYZ and dimethyl terephthalate (DMTP) is investigated, and moreover, the transient absorption spectra of positive and negative ions as the results of the dissociation of the exciplex in the polar solvents is observed through the flash photolysis.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Numerical analysis of roughness effect on microtube heat transfer

Roughness effect on the heat transfer and pressure loss performances of microscale tubes and channels are investigated through a finite element CFD code. Surface roughness is explicitly modelled through a set of random generated peaks along the ideal smooth surface. Different peak shapes and distributions are considered; geometrical parameters are representative of tubes in the diameter range from 50 to 150 μm. The use of a fine enough mesh allows the direct computation of tube performances under the assumption of incompressible fully developed flow. As a result, a significant increase in Poiseuille number is detected for all of the configurations considered, while the effect of roughness on heat transfer rate is smaller and highly dependent on the tube shape.     

Logarithmic asymptotics of solutions of the large deviation problem for the boltzmann equation with small transfer of momentum

For the Boltzmann equation with small transfer of momentum, we derive a system of nonlinear integral-differential equations describing the logarithmic asymptotics of the solution to the Cauchy problem in the domain at the distanceO(1) from the support of the initial condition.Translated fromMatematicheskie Zametki, Vol. 64, No. 1, pp. 73–94, July, 1998.This research was partially supported by INTAS-RFBR under grant No. 95-91 in the case of the first author, and by INTAS under grant No. 96-0698 in the case of the second author.     

Synthesis and characterization of functional gradient copolymers of allyl methacrylate and butyl acrylate

Functional spontaneous gradient copolymers of allyl methacrylate (A) and butyl acrylate (B) were synthesized via atom transfer radical polymerization. The copolymerization reactions were carried out in toluene solutions at 100 °C with methyl 2‐bromopropionate as the initiator and copper bromide with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst system. Different aspects of the statistical reaction copolymerizations, such as the kinetic behavior, crosslinking density, and gel fraction, were studied. The gel data were compared with Flory's gelation theory, and the sol fractions of the synthesized copolymers were characterized by size exclusion chromatography and nuclear magnetic resonance spectroscopy. The copolymer composition, demonstrating the gradient character of the copolymers, and the microstructure were analyzed. The experimental data agreed well with data calculated with the Mayo–Lewis terminal model and Bernoullian statistics, with monomer reactivity ratios of 2.58 ± 0.37 and 0.51 ± 0.05 for A and B, respectively, an isotacticity parameter for A of 0.24, and a coisotacticity parameter of 0.33. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5304–5315, 2006     

Interactions between kinetic and radiative processes inside moving absorbing fluids

The aim of this paper is to present several features of the couplings occurring between radiative transfer and the kinetics of a moving dielectric. After determining how the velocity field affects the apparent thermo-optical properties of matter, the energy transport problem is investigated in instationary regime and the general form of transient radiative transfer equation inside a moving medium is built. Then, the model is applied to the particular case of turbulent flows: a system of two equations for mean and fluctuating radiative energies is presented, and the resolution of this system is finally carried out.     

Application of the stabilization method to interacting resonances

The stabilization method is applied to the case of interacting resonances in the photo-dissociation of van der Waals clusters composed by a rare gas atom bound to a dihalogen molecule. The study of an illustrative two-dimensional model consisting in a T-shaped NeI₂ molecule shows the adequacy of the method whenever the projection of the stabilization wave functions on the assumed prepared initial state is accounted for. The agreement of the fragmentation cross-sections with some previous results using the effective resolvent method and accurate close-coupling calculations is excellent. The method reveals its utility as a complementary tool since allows, through the analysis of the stabilization wave function in terms of zero-order levels, a precise characterization of the resonant states involved. Received 5 April 2002 / Received in final form 24 May 2002 Published online 19 July 2002