蛋白质组学中质谱分析前的预富集研究进展

回顾了近年来生物质谱分析鉴定蛋白质及多肽前的预富集方法研究进展,其中包括固相微萃取富集方法、靶上富集方法、电洗脱富集方法以及磷酸化蛋白质/肽段的富集方法,总结和归纳了各种方法所具有的优缺点,引用文献59篇。     

污垢热阻动态监测装置及其传热计算方法的研究

介绍了污垢热阻动态监测装置的构成及特点.根据传热学基本原理,对该套装置进行了光滑管对流换热性能测试,结果表明两侧流体热平衡最大偏差小于10%,实验结果与经验公式计算的Nu数相吻合,其最大偏差小于l0%.用该装置进行换热表面污垢的动态自动监测,可以得出准确可靠的实验结果.     

咪唑啉纤维树脂分离富集/ICP-MS测定矿石中的痕量铂(Ⅳ)

本文提出了咪唑啉纤维树脂分离富集/ICP-MS测定矿石中痕量铂(Ⅳ)的方法。实验考察了影响咪唑啉纤维树脂分离富集痕量Pt(Ⅳ)的酸度、流速、洗脱液的组成、体积等因素,结果发现:在20%的王水介质中,Pt(Ⅳ)能定量吸附于树脂上并与大量其它金属分离;被吸附的Pt(Ⅳ)可用5%硫脲-1%HCl溶液定量洗脱,ICP-MS测定Pt(Ⅳ)的回收率为87%~102%。所建立的方法应用于硫镍矿管理样分析,其测定结果与推荐值吻合。     

Controlled Release of the Dithiocarbamate Ligand From A Polypyrrole Polymer. A Basis For On-Line Electrochemicalycontrolled Derivatisation

Abstract

The development of a novel on-line derivatisation scheme is described. the scheme involves use of a conducting polymeric material into which the derivatising agent is incorporated. the properties of the polymer enable electrochemical controlled release of the reagent into flowing solutions.     

Preliminary study on aerosol particle addition calibration method for on-line quantitative analysis of airborne radioactive particles with ICP-MS

An ambient aerosol concentration enrichment system coupled with ICP-MS for real-time monitoring of airborne radioactive particles is now under development. ICP-MS is very sensitive to sample introduction conditions, so it is necessary to develop an easy-use calibration method for on-line quantitative analysis in field application. In this paper, a calibration method using standard solution instead of monodisperse particles was established and validated preliminarily. First of all, four parameters for the method were determined experimentally, including: uptake flow rate and nebulisation efficiency of the Microconcentric nebuliser, nebulisation/transport efficiency of Aridus Desolvating Sample Introduction System, and Relative Sensitivity Factor between ¹⁵⁹?Tb and ¹⁷⁴?Yb. Then, monodisperse terbium nitrate particles were generated by a commercial Vibrating Orifice Aerosol Generator. Continuous aerosols of ytterbium nitrate droplets were nebulised from standard solution. They were mixed together, desolvated through the membrane dryer and introduced into ICP-MS for on-line analysis of terbium nitrate particles. The air sampled from nuclear environment was also introduced into ICP-MS to investigate the effect of flow rate on instrument responses. Finally, atom numbers of ¹⁵⁹?Tb in discrete terbium nitrate particles were determined using the calibration method and compared to the calculated value. Results show that when air flow rate increase from 10?mL?min^?1 to 100?mL?min^?1, the ratio of ¹⁵⁹?Tb ion count to ¹⁷⁴?Yb ion intensity keeps constant although instrument sensitivity decreases by a factor of 25. The relative standard deviation of ¹⁵⁹?Tb atom number measured is better than 18%. The discrepancy with the calculated value could be attributed to the over-estimation of atom number in the particles generated by VOAG because there was some liquid leakage in the VOAG.     

An improved method for the determination of S-Carboxymethyl-L-cysteine in biological fluids with precolumn derivatization and on-line clean-up

Summary In order to follow levels of S-Carboxymethyl-L-cysteine in biological fluids for a period as long as three half-lives after drug administration during pharmacokinetic studies, an improved method for its determination had to be developed. Like the previous one, this method uses a protein precipitation step followed by an O-Phthalaldehyde derivatization step and then an HPLC on-line clean-up. This latter was obtained by means of a switching valve system, including a Nucleosil CN 5 m (3 cm × 4.6 mm i.d.) precolumn and a Spherisorb ODS 5 m (15 cm×4.6 mm i.d.) analytical column. The sensitivity limit was improved to 0.1 g/ml in plasma samples and 0.2 g/ml in urine samples.This method was applied in studies comparing single (0.75 g) and repeated (0.75 g tid) oral administration of the drug to 30 elderly patients and 20 healthy volunteers. Results showed that the half-life was 40% longer in elderly patients than in healthy volunteers, and that area under the plasma concentration versus time curve (AUC) values in elderly patients were twice those obtained with young subjects.     

Preconcentration of samples in sandwich tanks for continuous thin-layer chromatography

It is demonstrated that horizontai sandwich tank with two cover plates can be used to preconcentrate sample solutions. Narrow sharply-defined starting zones are obtained just outside the smaller cover plate when the series of spots of the sample solution are applied on the thin layer and predeveloped with a volatile solvent. After evaporation of the solvent, the whole area of the TLC-plate is covered with two plates and developed with a suitable solvent.     

Determination of an opiate pentapeptide by on-line reversed phase preconcentration and ligand exchange chromatography with spectrofluorometric detection

Summary In order to study the occurrence of the opiate pentapeptide -[D-Ala^2,4, Tyr⁵] CM-5-NH₂ in the 10^–9–10^–5 M concentration range, we have developed a new method consisting of extraction of the peptide from its buffered aqueous medium onto a reversed phase cartridge of 50 L void volume, followed by on-line injection onto a Cu(II) modified silica gel column. The acetonitrile-rich mobile phase allows detection of the natural fluorescence of the peptide at the picomole level.     

On-Line Separation and Preconcentration of Trace Metals in Biological Samples Using a Microcolumn Loaded with PAN-Modified Nanometer-Sized Titanium Dioxide,and Their Determination by ICP-AES

A flow injection analysis system incorporating a microcolumn of nanometer-sized TiO₂ loaded with 1-(2-pyridylazo)-2-naphthol (PAN) has been used for the development of an on-line multi-element method for simultaneous separation and preconcentration and subsequent determination of Cu²⁺, Co²⁺, Cr³⁺, Y³⁺, Yb³⁺ and Bi³⁺ by ICP-AES. Effects of pH, sample flow rate and volume, elution conditions, adsorption capacity and interfering ions on analyte recovery were examined. The adsorption capacity of nanometer-sized TiO₂ loaded with PAN was 4.73, 18.57, 3.81, 6.14, 4.52 and 20.35mgg^–1 for Cu²⁺, Cr³⁺, Y³⁺, Yb³⁺, Co²⁺ and Bi³⁺, respectively. The method has been applied to the analysis of trace elements in standard reference biological samples, and the results are in good agreement with the certified values.     

一种可实现薄膜厚度在线测量的方法

介绍了一种测量固体薄膜厚度的光学方法。该方法具有测量速度快、可实现在线测量等特点。为解决薄膜生产过程中厚度在线检测问题,构造了一套软硬件实验系统,利用该系统进行实验的结果表明:在10~100μm厚度范围,测量误差小于10%,满足实际生产需要。