稀土萃取分离过程自动控制研究现状及发展趋势

在简要描述稀土萃取分离生产过程的基础上,综述了目前国内外稀土萃取分离过程中稀土元素成分在线检测的方法、装置及其应用现状;稀土串级萃取分离生产过程的计算机流程模拟以及稀土萃取生产过程的自动控制方法、技术及其应用现状.指出了稀土元素组分含量的软测量方法,以综合生产指标为目标的稀土萃取分离生产过程优化控制方法以及由生产过程管理系统和过程控制系统两层结构组成的稀土萃取分离生产过程综合自动化系统已成为稀土萃取分离生产过程自动化未来发展的方向.     

键合4-(2-吡啶偶氮)-间苯二酚螯合树脂分离富集-火焰原子吸收法测定蔬菜中痕量镉(Ⅱ)

本文合成了Amberlite XAD-4键合4-(2-吡啶偶氮)-间苯二酚螯合树脂,并考察了其对痕量镉(Ⅱ)的吸附性能。探讨了溶液pH、洗脱剂和干扰离子等对镉(Ⅱ)分离富集的影响。树脂吸附容量为4.7mg/g,吸附的镉(Ⅱ)用5mL 2mol/L HNO3乙醇溶液洗脱,火焰原子吸收法测定。在最佳实验条件下,回收率为94.4%～97.9%,相对标准偏差在1.7%～2.7%之间。方法可用于蔬菜中镉(Ⅱ)的测定。     

Ion-Exchange Preconcentration and Separation of Trace mounts of Platinum and Palladium

ABSTRACT

The preconcentration and separation of platinum and palladium from weakly acidic solution (pH=4) were done on microcolumn packed with Cellex-T resin. Selective platinum elution from the column was performed with 0.01 mol/l glycine solution at pH=12, while for palladium elution 1.2 mol/l thiourea (pH=0.5) or 4.0 mol/l potassium thiocyanate (pH=1) may be used. As the detection technique was used either FAAS or GFAAS, depending on the concentration of studied metals in the eluate.     

Determination of Aluminum Traces in Hemodialysis and Tap Water Using Standard Method's Procedure Modified and Flow Injection Ionic Exchange Preconcentration

Abstract

A procedure for the spectrophotometric determination of aluminum traces in water using a flow injection (FI) preconcentration system has been proposed. The flow system was made up of a peristaltic pump, an injector‐commutator, and a minicolumn filled with 300.0 mg of Amberlite IR‐120 cationic exchange resin. After the preconcentration step, aluminum was eluted by a 4.0 mol l^?1 HCl solution. In a second stage, out of the flow system, the eluate was neutralized with a 4.0 mol l^?1 NaOH solution. The aluminum was submitted to the reaction with eriochrome cyanine to form a chelate in solution buffered to pH 5.85, according to the Standard Method's procedure with some modifications, and this was followed by spectrophotometric detection. Chemical and flow variables were studied in the preconcentration system. The precision of the proposed method was calculated for a solution containing 46.8 µg l^?1 of Al(III), when 40.0 ml of solution were preconcentrated (n=7), and their respective relative standard deviation (RSD) was 1.8%. The detection limit obtained was 1.7 µg l^?1 of Al(III) (sample volume=40.0 ml). The proposed method was successful in determining aluminum in water certified reference material.     

Determination of Iron (II) in Water by a Spectrophotometric Method After Preconcentration on an Organic Solvent-Soluble Membrane Filter

Abstract

A solvent-soluble membrane filter is proposed for a simple and rapid preconcentration and spectrophotometric determination of iron (II), which was collected on a nitrocellulose membrane filter as an ion-associate of the cationic complex of iron (II)-1,10-phenanthroline with an anionic surfactant of dodecyl sulfate. The ion-associate collected was dissolved in 5 ml of 2-methoxyethanol together with the filter. The color intensity due to the ion-associate in the resulting solution was measured at 510 nm against a reagent blank. Beer's law is obeyed in the range 1–15 μg Fe (II) in 5 ml of solvent with excellent reproducibility, and detection limits better than 0.5 μg dm^?3 as Fe (II) can be achieved. The diverse components normally present in water do not interfere when proper masking reagent is added. The proposed method has been applied to the analysis of water samples from several sources such as river water, ground water and tapwater samples, the recoveries of the iron (II) added to the samples are quantitative, and results found are satisfactory.     

Chemical-physical aspects of formation and evolution of phase structure in multi-polymers: Intensity fluctuation, phase structure and its fractal characteristics in blends of isotactic polypropylene with poly(cis-1,4-butadiene) rubber

This paper studies the formation and evolution of phase structure of isotactic polypropylene/poly(cis-1,4-butadiene) (iPP/PcBR) blends during molten and mixing in a visual mixer by on-line analysis of the small angle light back scattering. The density fluctuation of iPP/PcBR blends during molten and mixing is discussed using the integral-intensity Js, of the scattering intensity of the blends. The "invariant" Q, which shows fluctuation of the system, is calculated by data of the small angle light back scattering, and the variation of Q with the blending time, temperature and shear rate during molten and mixing in iPP/PcBR blends is discussed. The structure parameters which characterize dimensions of phase in the blends, as the correlation distance ac, and the average chord lengths of two-phase, as li PP and lP cBR, are calculated by data of scattering intensity. The average diameters dp of dispersed phases are calculated from SEM images. The variation of ac, dp, li PP and lP cBR with the blending time and compositions in the blends during molten and mixing is discussed. The scale law is analyzed to find multi-scale characteristics in this system. The generalized fractal dimension Dp is calculated and the relation of Dp with generalized entropy function is discussed to determine that Dp is state function and the physical significance of Dp is the same as that of the generalized entropy function.     

茜素红S螯合树脂分离富集测定地质样品中的痕量金、铂和钯

用螯合树脂对金属进行分离富集及测定,前人已做了许多有意义的研究^[1～4].曾用含键合S双硫腙(P-D)和脱氢双硫腙(P-DT)功能团的离子交换树脂和螯合树脂分离金和铂族金属^[5],用双硫腙负载树脂分离富集Cu(Ⅱ)^[6]。     

流动注射在线共沉淀预富集火焰原子吸收法测定痕量铜

研究了以Ｎｉ＾２＋－ＤＤＴＣ为共沉淀载体，流动注射在线共沉淀预富集－火焰原子吸收光谱法测定痕量铜的体系，在０．３ｍｏｌ．Ｌ＾－１的硝酸介质中，铜离子在编织反应器中与Ｎｉ＾２＋－ＤＤＴＣ（产生共沉淀，并被收集在编织器内壁上，用甲基异丁基酮（ＭＩＢＫ）在线洗脱沉积物并引入火争原子化器中测定。当富集时间为４０ｓ时，４０μｇ．Ｌ＾－１的铜１０次测定的相对标准偏差为３．０％，灵敏度提高６０倍，检出限（３σ）     

On-line preconcentration and determination of nickel in natural water samples by flow injection-inductively coupled plasma optical emission spectrometry (FI-ICP-OES)

An on-line nickel preconcentration and determination system implemented with inductively coupled plasma optical emission spectrometry (ICP-OES) associated to flow injection (FI) was studied. Trace amounts of nickel were preconcentrated by sorption on a conical minicolumn packed with activated carbon (AC) at pH 5.0. The nickel was removed from the minicolumn with 20% nitric acid. An enrichment factor of 80-fold for a sample volume of 50 ml was obtained. The detection limit (DL) value for the preconcentration method proposed was 82 ng l⁻¹. The precision for ten replicate determinations at the 0.5 μg l⁻¹ Ni level was 3.0% relative standard deviation (R.S.D.), calculated from the peak heights obtained. The calibration graph preconcentration method for nickel was linear with a correlation coefficient of 0.9997 at levels near the detection limits (DL) up to at least 100 μg l⁻¹. The method was successfully applied to the determination of nickel in natural water samples.     

Multiresidue fully automated online SPE-HPLC-MS/MS method for the quantification of endocrine-disrupting and pharmaceutical compounds at trace level in surface water

The present work describes the development and validation of a sensitive method for the determination of traces of diverse groups of pharmaceuticals and endocrine disruptors in surface water. Thirty-seven substances have been selected, including 10 pesticides, 6 hormonal steroids and assimilates, 12 pharmaceuticals, 5 alkylphenols, 1 chlorophenol and 3 other well-known human contaminants, 1 UV filter and 2 plasticisers. An automated online solid-phase extraction (SPE) is directly coupled to liquid chromatography–tandem mass spectrometry. Different SPE columns have been tested, and the injection volume has been optimised. The developed analytical methodology is based on the direct injection of 2.5 mL of water sample acidified at pH 1.6 on an Oasis HLB loading column (20 × 2.1 mm) with 5-µm particles. Then, the chromatographic separation is achieved on a Kinetex XB C18 (100 × 2.1 mm; 1.7 µm) column, and the quantification is realised in multiple-reaction monitoring mode. The online SPE step warrants minimal sample handling, low solvent consumption, high sample throughput, saving time and costs. This method allows the quantification of the target analytes in the lower ng/L concentration range, with limits of quantification (LQs) between 100 pg/L and 10 ng/L, 26 compounds having LQ lower than 1 ng/L. The monitoring of two selected MS/MS transitions for each compound allows the reliable confirmation of positive findings even at the LQ level. The developed and validated methodology has been applied to the analysis of various real samples from two French rivers. Twelve target compounds have been detected in the environmental samples, and the major pollutants are pharmaceuticals usually used by humans (paracetamol, carbamazepine, oxazepam, ketoprofen, trimethoprim). The pesticides atrazine and carbendazim have been ubiquitously detected in real samples too. Metronidazole, sulfamethoxazole and diuron were also frequently quantified in the water samples.