Spectroscopic Study on Interaction of β-Cyclodextrin with Triprolidine Hydrochloride

The complexation of triprolidine hydrochloride （TRP） and β-cyclodextrin （β-CD） in deuterium oxide was investigated by 400 MHz 1^H NMR spectroscopy. The 800 MHz 2D ROESY data revealed that two 1 ：1 and one 2 ： 1 β-CD-TRP inclusion complexes were formed. Both aromatic moieties （p-tolyl and pyridyl ring） has entered into the β-CD cavity, confirming the existence of two different equilibria for 1 ： 1 inclusion complexes in which p-tolyl ring of the guest is more tightly held by the host cavity. The ROE intermolecular interactions provided the plausible structures of these 1 ： 1 and 2 ： 1 stoichiometric inclusion complexes of β-CD-triprolidine hydrochloride in solu- tion.     

Two-dimensional double-quantum 2H NMR spectroscopy in the solid state under OMAS conditions: correlating 2H chemical shifts with quasistatic line shapes.

Solid-state 2H NMR spectroscopy is a well-established and versatile method to study molecular orientation and dynamics in selectively deuterated samples. Herein, we introduce a 2D 2H double-quantum (DQ) NMR experiment performed under fast magic-angle spinning with a slight offset of the magic angle (OMAS). The experiment combines 2H chemical-shift resolution with DQ-filtered quasistatic 2H line shapes. In this way, it is possible to separate 2H resonances and to independently determine 2H quadrupole couplings at multiple sites. While 2H chemical shifts are resolved in the 2H DQ dimension, the quadrupole parameters can be obtained from characteristic line shapes which are reintroduced in the second dimension by the magic-angle offset. The 2D 2H DQ OMAS experiment is demonstrated on L-histidine which was deuterated at multiple sites by recrystallisation from D2O.     

Feasibility of a liquid-phase microextraction sample clean-up and liquid chromatographic/mass spectrometric screening method for selected anabolic steroid glucuronides in biological samples

Anabolic androgenic steroids (AAS) are metabolized extensively in the human body, resulting mainly in the formation of glucuronide conjugates. Current detection methods for AAS are based on gas chromatographic/mass spectrometric (GC/MS) analysis of the hydrolyzed steroid aglycones. These analyses require laborious sample preparation steps and are therefore time consuming. Our interest was to develop a rapid and straightforward method for intact steroid glucuronides in biological samples, using liquid-phase microextraction (LPME) sample clean-up and concentration method combined with liquid chromatographic/tandem mass spectrometric (LC/MS/MS) analysis. The applicability of LPME was optimized for 13 steroid glucuronides, and compared with conventional liquid-liquid extraction (LLE) and solid-phase extraction (SPE) procedures. An LC/MS/MS method was developed for the quantitative detection of AAS glucuronides, using a deuterium-labeled steroid glucuronide as the internal standard. LPME, owing to its high specificity, was shown to be better suited than conventional LLE and SPE for the clean-up of urinary AAS glucuronides. The LPME/LC/MS/MS method was fast and reliable, offering acceptable reproducibility and linearity with detection limits in the range 2-20 ng ml(-1) for most of the selected AAS glucuronides. The method was successfully applied to in vitro metabolic studies, and also tested with an authentic forensic urine sample. For a urine matrix the method still has some unsolved problems with specificity, which should be overcome before the method can be reliably used for doping analysis, but still offering additional and complementary data for current GC/MS analyses.     

聚氨酯分子印章的制备和表征

“软平板印刷”微结构制备技术为微米和亚微米器件的制备提供了一条新的途径 [1] ,已被电子学家和材料学家所应用 ,近年来进入了生物学领域[2 ] .本实验室将这一方法与生物分子电子学相结合 ,提出了用于 DNA芯片在片合成的分子印章法 [3,4 ] .分子印章法的实质是接触压印与组合化学相结合的固相界面反应 .聚二甲氧基硅氧烷 ( PDMS)是一种软印刷的优良材料 [5] ,但是由于其疏水性和较差的机械性能 ,必须对其进行改性才能用来制备 DNA分子印章 [6 ] .　　聚氨酯作为一种功能材料 ,由于分子中交替的软、硬链段及其不同的热动力学性能而形成…     

Influence of the exchange‐correlation functional in all‐electron calculations of the vibrational frequencies of corundum (α‐Al2O3)

The equilibrium structural parameters, high‐ and low‐frequency dielectric tensors, Born effective charges, and Γ‐point vibrational frequencies of bulk Al₂O₃ corundum are calculated by using the periodic, ab initio program CRYSTAL, which adopts an all‐electron Gaussian‐type basis set. The effect of basis set and the performance of three different functionals, i.e., LDA, PW91, and B3LYP, are discussed. The mean absolute deviation from the measured frequencies is as small as 7 cm^?1 for both the LDA and B3LYP functionals, indicating that these functionals perform extremely well in this case. The mean absolute deviation increases to 18 cm^?1 when the PW91 functional is used. All three functionals reproduce the equilibrium geometry of corundum to a high level of accuracy, with LDA and B3LYP outperforming PW91 slightly. The comparison of the current all‐electron calculations with previous plane‐wave, pseudo‐potential calculations shows an overall similar performance. The results of isotopic substitution for both Al and O are also presented. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Additivity Factors in the Binding of the Diethyltin(IV) Cation by Ligands Containing Amino and Carboxylic Groups at Different Ionic Strengths

Complex formation constants were determined potentiometrically (by a ISE-H⁺, glass electrode) in the systems, M²⁺ – L^z – H⁺ [M²⁺ = (C₂H₅)₂Sn²⁺, L^z = malonate, glycinate and ethylenediamine] at t = 25 ^∘C and 0.1 mol-L⁻¹≤ I/ ≤ 1 mol-L⁻¹ in NaCl_aq (0.1 mol-L⁻¹ ≤ I ≤ 0.75 mol-L⁻¹ for the ethylenediamine system). Thermodynamic values of formation constants, at infinite dilution, are [± 95% confidence interval, ^Tβ_pqr refer to the equilibrium, pM²⁺ + qL^z + rH⁺ = M_pL_qH_r^(2+z+r)]: for malonate, log₁₀ ^Tβ₁₁₀ = (5.47 ± 0.10); for glycinate, log₁₀ ^Tβ₁₁₀ = (9.54 ± 0.08), log₁₀ ^Tβ₁₁₁ = (12.97 ± 0.10); and for ethylenediamine, log₁₀ ^Tβ₁₁₀ = (10.47 ± 0.10), log₁₀ ^Tβ₁₂₀ = (16.17 ± 0.12) and log₁₀ ^Tβ₁₁₁ = (15.46 ± 0.10). The dependence on ionic strength of the formation constants was modeled by a simple Debye–Hückel type equation and by the SIT approach. By analyzing the stability of the species in the three different systems we found a simple additivity rule that can be expressed by the relationship: log₁₀ K = 6.46 n_N + 3.96 n_O − 0.60 (n_N²+ n_O²), with a mean deviation, ε(log₁₀ K) = 0.15 (K = equilibrium constant for the interaction of the organometal cation with the unprotonated or protonated ligand, n_N = number of amino groups and n_O = number of carboxylic groups of the ligand(s) involved in the formation reaction of complex species).     

卟啉超分子化合物在分子器件中的应用

分子电子器件已成为近年来的一个研究热点，卟啉类化合物因为光敏性好、性能稳定、易于修饰等优点成为分子器件研究的理想模型化合物。本文着重介绍了它在分子器件中的最新应用进展。     

Printed plastic electronics and paperlike displays

Plastic electronic materials and high‐resolution printing methods may be important technologies for new classes of consumer electronic devices that are lightweight, mechanically flexible and bendable, and that can cover large areas at low cost. This article summarizes some of our recent work in this area. It focuses on the materials and patterning techniques that we used to produce plastic active‐matrix backplane circuits for a type of paperlike display. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3327–3334, 2002     

Cycloarsanes (AsCF3)n (n = 4, 5) – Precursors for the Highly Reactive Diarsene F3CAs=AsCF3

Tetrakis(trifluoromethyl) cyclotetraarsane (F₃CAs)₄ ( 2 ) was used to repeat the UV initiated [4+2]‐cycloaddition reaction of the diarsene F₃CAs=AsCF₃ ( 1 ) with cyclohexa‐1,3‐diene (CHD) and to isolate single crystals of the cycloadduct 4 for a X‐ray diffraction analysis. 4 crystallizes in the space group and contains the diarsene group in its E‐configuration. 2 was also applied for [2+2]‐cycloaddition reactions of 1 with tBuC≡P and MeC≡CNⁱPr₂, but in contrast to positive results with (F₃CP)₄ the products were too labile for isolation. However, 2 was successfully used at room temperature as precursor for coordinating 1 as π‐donor ligand to the Pd(PPh₃)₂ complex fragment yielding η²‐bis(trifluoromethyl)diarsene‐bis(triphenylphosphane)‐palladium(0) 5 , which was characterized by X‐ray diffraction of single crystals and by spectroscopic investigations (NMR, IR, MS). Attempts to prove the existence of the diarsene 1 , generated by different methods, by spectroscopic studies very probably failed due to its extreme reactivity, not allowing the necessary concentrations for detection. Quantum chemical calculations of the stability of 1 with respect to dimerization, the stability of the [2+2]‐cycloadduct with 1‐di(isopropyl)aminopropyne and the energy difference between 4 and the 2,3‐dimethyl‐1,3‐butadiene cycloadduct of 1 were performed to understand the considerable differences between 1 and the related diphosphene F₃CP=PCF₃.