α，ω-二羧基-甲基丙烯酸丁酯低聚物的合成及MS分析

利用传统自由基聚合法，在四氢呋喃溶液中自由基引发聚合甲基丙烯酸丁酯单体而得到ω-羧基-甲基丙烯酸丁酯低聚物(CTBMA)(分子量在1500左右)；利用CTBMA末端酯基的反应特性，在二氧六环／水／KOH混合溶液中皂化CTBMA，使之转化为α，ω-羧基甲基丙烯酸丁酯低聚物(di-CTBMA)；研究了溶剂的类别、反应时间等反应条件对皂化产物结构的影响；利用MALDI-TOF-MS及LSIMS对皂化各阶段产物进行了分析监测．实验表明，在适当的皂化条件下，CTBMA皂化时主要为末端酯基转化为羧基，相应得到的产物di-CTMBA具有很好的结构特性，其官能团度(functionality)接近2．     

丙烯氨氧化Mo-Bi-Fe-P/海泡石负载型催化剂的研究

丙烯氨氧化Mo-Bi-Fe-P/海泡石负载型催化剂的研究     

Morphology, crystallization behavior and properties of impact-modified polypropylene copolymer with or without sodium benzoate as a nucleating agent

 The morphology, crystallization behavior, and properties of an impact-modified polypropylene (PP) copolymer with or without sodium benzoate were investigated. The contents of ethylene–propylene rubber (EPR) in the reactor-made PP copolymer is about 15 wt%. For comparison, blends of PP and EPR containing the same EPR composition were prepared by melt-mixing. Morphological studies by scanning probe microscopy indicated that the impact-modified copolymer consists of three different phases, i.e., polyethylene, PP, and EPR phases, which is considerably different from the morphology of the conventional PP/EPR blend of the corresponding composition. The impact-modified PP copolymer exhibited a higher crystallization rate in terms of the lower crystallization half-time and thus higher thermal and mechanical properties, such as impact strength and hardness, than the PP/EPR blend did. The addition of sodium benzoate as a nucleating agent to the copolymer increased the crystallization rate and the mechanical properties. Received: 4 June 2001 Accepted: 31 October 2001     

Novel tricontinuous hydrophilic–lipophilic–oxyphilic membranes: Synthesis and characterization

Novel tricontinuous membranes consisting of well‐defined hydrophilic poly(ethylene glycol) (PEG) and lipophilic polyisobutylene (PIB) segments crosslinked by oxyphilic poly(pentamethylcyclopentasiloxane) (PD₅) domains have been synthesized and characterized. Tricontinuity arises because the three membrane constituents—PEG, PIB, and PD₅—are mutually incompatible and give rise to three independent cocontinuous phases (channels). The continuous PEG segments impart swelling in water (hydrogel character), the rubbery PIB moieties provide strength, and the PD₅ domains provide crosslinking and enhanced O₂ permeability. The synthesis involves the random cohydrosilation of various lengths (number‐average molecular weights) of α,ω‐diallyl‐PEG and α,ω‐diallyl‐PIB segments by pentamethylcyclopentasiloxane (D₅H) followed by water‐mediated oxidation of the SiH groups of the D₅H to SiOH groups, which immediately polycondense to PD₅ domains. Membranes containing about equal amounts of PEG, PIB, and PD₅ give rise to tricontinuous morphologies that allow the simultaneous permeation of water, heptane, and oxygen via three cocontinuous channels. The number‐average molecular weight of the PEG segment, that is, the number‐average molecular weight of the hydrophilic segment between two PD₅ crosslink sites, determines the dimensions (pore sizes) of the channels through which water can permeate. A method has been developed for studying the oxygen permeability of membranes. The microarchitecture of the membranes has been investigated with selective swelling experiments and Fourier transform infrared spectroscopy, their mechanical properties have been examined in the water‐swollen state with Instron measurements, and their bulk morphologies and thermal degradation have been determined with differential scanning calorimetry and thermogravimetric analysis, respectively. The findings have been interpreted in terms of phase‐separated PEG, PIB, and PD₅ microdomains. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1209–1217, 2002     

铝卟啉配合物催化二氧化碳与环氧丙烷共聚反应

铝卟啉是一类土壤环境友好的金属卟啉,尽管早在1978年Inoue就已经发现它可以催化CO₂和环氧丙烷的共聚反应,但是该催化体系一直面临催化活性低、聚合物相对分子质量低等难题。 本文通过改变铝卟啉催化剂配体中苯环上取代基的种类和位置,制备出中心金属电子环境差异化的铝卟啉,并以双三苯基膦氯化铵(PPNCl)为助催化剂,探讨其对CO₂与环氧丙烷的共聚反应的催化行为。 结果表明,当铝卟啉中苯环上2,4位同时被Cl^-取代后,在90 ℃和3 MPa压力下,转化频率(TOF)达到2672 h^-1。 当利用离去能力较强的对甲苯磺酸基团(OTs^-)作为铝卟啉的轴向配体,可以合成出数均相对分子质量达1.84×10⁵的脂肪族聚碳酸酯。     

Manufacturing of pH sensitive PVA/PVP/MWCNT and PVA/PEG/MWCNT nanocomposites: an approach for significant drug release

The purpose of this paper is studying the effect of incorporation of Multiwall Carbon Nanotubes (MWCNT) into two different nanocomposites in poly vinyl alcohol (PVA)/polyvinylpyrrolidone (PVP), and PVA/Polyethylene glycol (PEG). MWCNT were synthesized by chemical vapor deposition (CVD) method using acetylene and Fe/Co/Al₂O₃ as carbon precursor and catalyst, respectively. Nitric acid and sulfuric acid were used for purification and functionalization of MWCNT. Afterward, highly pure and functionalized MWCNT (0, 0.02, and 0.05% w/w) were incorporated in PVA/PVP and PVA/PEG to synthesize PVA/PVP/MWCNT and PVA/PEG/MWCNT nanocomposites hydrogel membranes that cross-linked by freezing–thawing. PEG and PVP were selected in these nanocomposites as dispersion matrix for MWCNT as well as for increasing the elasticity of the nanocomposites membranes. The morphology of the hydrogels was characterized by SEM, FTIR, XRD, TGA, and the mechanical properties of the hydrogel membranes were investigated. The swelling behavior in different pH-buffer solutions was studied as well as studying weight loss percentage and swelling kinetic. The drug releasing process of the hydrogel membranes was investigated using salicylic acid as a model drug. It was found that MWCNT are dispersed well into the polymers and crystallinity, mechanical properties and thermal stability of the hydrogels contain MWCNT are better than that without MWCNT. Maximum degree of swelling was observed at pH 7 and swelling degree increases with increasing the ratio of MWCNT in the hydrogels from 0.02 to 0.05%. All hydrogel membranes followed non-Fickian mechanism and drug releasing were controlled by varying the pH and amount of MWCNT.     

Exploring the electro‐optical properties of conjugated polymers based on oligo‐selenophene and oligo(3,4‐ethylenedioxyselenophene)

For seeking high‐efficiency narrow‐band‐gap donor materials to enhance short‐circuit current density for organic solar cells, a series of oligo‐selenophene (OS) and oligo(3,4‐ethylenedioxyselenophene) (OEDOS) with various chain lengths were designed and characterized using density functional theory (DFT) and time‐dependent DFT calculations. Based on the results, it can be seen that with increasing chain length of the oligomers in both syn‐ and anti‐adding manners, the bond length alternation is decreased which indicates that the π‐electron delocalization is increased. Also, when the chain length is increased the electronic energy gap and the optical energy gap are decreased. It can be concluded that the syn‐(OS)_n=10,14,15, anti‐(OS)_n=14 and anti‐(OEDOS)_n=7–12 oligomers can act as low‐band‐gap polymers. Therefore they can absorb more sunlight based on maximum wavelength (higher than 620 nm). Furthermore, a red shift in the simulated absorption spectra of (OS)_n and (OEDOS)_n donors is observed. It is found that (OS)_n=14,15 with syn configuration of the extended oligomers is the most suitable donor for the design of high‐performance organic solar cells possessing a narrow electronic band gap, high exciton lifetime and broad and intense absorption spectra that cover the solar spectrum leading to complete light‐harvesting efficiency.     

Facile preparation and synergy study of DMC/ZnGA composite catalyst for the synthesis of oligo (propylene‐carbonate) diols

To overcome the weak carbon dioxide (CO₂) conversion ability of Zn‐Co double metal cyanide (DMC) catalyst, zinc glutarate (ZnGA) catalyst was introduced into the DMC catalytic system and applied for the synthesis of oligo (propylene‐carbonate) diols. The DMC/ZnGA composite catalyst (mass ratio = 10:1) exhibited an excellent synergistic effect which had enhanced CO₂ activation ability, high yield and good selectivity. In copolymerization process, ZnGA catalyst not only provided activated CO₂ for DMC catalyst, but also transferred the propagating chain with more alternating structures to DMC catalyst. Both of the two effects increased the carbonate content in the final products. Overall, DMC catalyst dedicated to the polymer chain growth, while the increased CO₂ conversion mainly attributed to ZnGA catalyst. Oligo (propylene‐carbonate) diols with carbonate unit content of 45.1 mol%, Mn of 1228 g/mol, W_PC of 4.3 wt% and high yield of 1689 g/g _cat was obtained.     

Raising the bar on-bead: Efficient on-resin synthesis of α-conotoxin LvIA

α4/7-Conotoxin LvIA is an isoform-selective inhibitor of the α3β2 nicotinic acetylcholine receptor. An efficient strategy for the synthesis of this toxin is critical to advancing its utility as a probe for receptor function and as a potential pharmaceutical lead target. On-resin methods for peptide synthesis offer potential synthetic advantages; however, strategies for on-resin formation of multiple disulfides have historically been low-yielding. Here, we harness the reactivity of the Allocam protecting group and employ a 3-amino acid spacer strategy to synthesize α4/7-conotoxin LvIA via three different on-resin strategies, each of which results in an isolated yield higher than previous fully on-resin approaches.     

Synthesis of Thiourea Derivatives on Soluble Polymeric Support

A modified poly(ethylene glycol) (PEG) has been developed as the soluble polymeric supports for liquid phase synthesis of novel thiourea derivatives.In each step of the sequence,the PEG-bound products were precipitated in cold Et2O and the unreacted materials and by-products were removed by simple filtration.The progress of reaction,purity of the isolation and the structure of the PEG-bound products were easily monitored by TLC,IR and ^1H NMR spectra.Representative thiourea derivatives were obtained in moderate yields with excellent purity from this modified PEG-bound product by the cleavage with 50% TFA/H2O.