Modification of hydrophobic acrylic intraocular lens with poly(ethylene glycol) by atmospheric pressure glow discharge: A facile approach

To improve the anterior surface biocompatibility of hydrophobic acrylic intraocular lens (IOL) in a convenient and continuous way, poly(ethylene glycol)s (PEGs) were immobilized by atmospheric pressure glow discharge (APGD) treatment using argon as the discharge gas. The hydrophilicity and chemical changes on the IOL surface were characterized by static water contact angle and X-ray photoelectron spectroscopy to confirm the covalent binding of PEG. The morphology of the IOL surface was observed under field emission scanning electron microscopy and atomic force microscopy. The surface biocompatibility was evaluated by adhesion experiments with platelets, macrophages, and lens epithelial cells (LECs) in vitro. The results revealed that the anterior surface of the PEG-grafted IOL displayed significantly and permanently improved hydrophilicity. Cell repellency was observed, especially in the PEG-modified IOL group, which resisted the attachment of platelets, macrophages and LECs. Moreover, the spread and growth of cells were suppressed, which may be attributed to the steric stabilization force and chain mobility effect of the modified PEG. All of these results indicated that hydrophobic acrylic IOLs can be hydrophilic modified by PEG through APGD treatment in a convenient and continuous manner which will provide advantages for further industrial applications.     

丙二醇甲醚中超痕量金属杂质元素的ICP-MS/MS分析

基于电感耦合等离子体串联质谱(ICP-MS/MS)建立了准确测定丙二醇甲醚中超痕量金属杂质元素的分析方法,提出了利用混合反应气消除质谱干扰的新策略.丙二醇甲醚经超纯水稀释后直接采用IC P-MS/MS测定其中具有挑战性的超痕量金属元素Mg,Al,K,Ti,V,Cr,Fe,Ni,Cu和Zn,在MS/MS模式下,选择混合气...     

Preparation and characterization of titania based nanowires

A new method for preparation of titania nanowires with diameter around 10 nm and length up to 2–3 μm is described. The precursor was prepared from sodium titanate by adding ethylene glycole (EG) and heating at temperature of 198°C for 6 h under reflux. The sodium titanate glycolate formed by this way aggregated into 1D nanostructures and was subsequently transformed into titania glycolate during a chemical treatment with 98% sulfuric acid. Titania nanowires with variable amount of anatase and rutile were prepared by heating to temperatures in the range 350–1000°C. The precursor as well as titania based samples were characterized by X-ray diffraction, Infrared spectroscopy, Scanning electron microscopy, High resolution transmission microscopy, Thermogravimetry, Differential thermal analysis, Evolved gas analysis and Emanation thermal analysis. The nitrogen adsorption/desorption was used for surface area and porosity determination. The photoactivity of the prepared titania samples was assessed by the photocatalytic decomposition of 4-chlorophenol in an aqueous slurry under UV irradiation of 365 nm wavelength.     

Fluorescence lifetimes of diphenylhexatriene-containing probes reflect local probe concentrations: Application to the measurement of membrane fusion

An important process in the life of a cell is fusion between cellular membranes. This is the process by which two cellular compartments surrounded by different membranes join to become a single compartment surrounded by a single membrane, without significant loss of compartment contents. To demonstrate fusion, the cell biophysicist must demonstrate all three critical aspects of the process: (1) mixing of membrane components, (2) mixing of compartment contents; and (3) retention of compartment contents. Most commonly, accomplishing this involves the use of fluorescence probes. The general theme to the methods described involves some form of concentration-dependent quenching. An unique method developed in our laboratory utilizes the concentration dependence of the fluorescence lifetime of a phosphatidylcholine containing carboxyethyl diphenylhexatriene at position 2 and palmitic acid at position 1 of glycerol (DPHpPC). The fluorescence lifetime of this molecule and that of its parent fluorophore diphenylhexatriene (DPH) shorten dramatically as their two-dimensional concentrations in a membrane increase. This lifetime quenching can be described by dimer formation that reduces the symmetry of the DPH excited state. This phenomenon allows one to use the fluorescence lifetime to gain insight into the local concentration of probe in microscopic regions of a membrane. One application of this is in distinguishing lipid transfer between the outer leaflets of two contacting membrane bilayers from fusion between these membranes that leads to mixing of lipids in both the inner and outer leaflets of the membrane bilayers. This allows a single measurement to demonstrate fusion between membrane pairs.Abbreviations PEG poly(ethylene glycol) - Na₂EDTA ethyiene-diamine-tetraacedic acid, disodium salt - LUV large, unilamellar vesicles made by rapid extrusion technique - DPH 1,6-diphenyl-trans-1,3,5-hexatriene - DPHpPC 1-palmitoyl-2-[[[2-[4- (phenyl-trans-1,3,5-hexatrienyl)phenyl]ethyl]oxy]carbonyl]-3-sn-phosphatidylcholine - DPPC 1,2-dipalmitoyl-3-sn-phosphatidylcholine - PA palmitic acid - NBD-PE N-(7-nitro-2,1,3-benzoxadiazol-4-yl)-PE - Rh-PE N-(lissamine Rhodamine B sulfoyl)-PE - R₁₈ octadecyl Rhodamine B chloride - ANTS 1-aminonaphthalene-3,6,8-trisulfonic acid - DPX N,N-p-xylylene-bis(pyradinium bromide)     

Relaxation dynamics and fragility during liquid–glass transitions of poly(propylene glycol)s

The acoustic and thermal properties of the liquid–glass transitions of propylene glycol and its oligomers, poly (propylene glycol)s, were studied by temperature modulated DSC and Brillouin scattering. The fragility indices were determined from Angell plots using the observed modulation frequency dependence of the complex heat capacity. The variation in the glass transition temperatures is discussed on the basis of the free volume theory. The relaxation time of the structural relaxation obeys the Vogel–Fulcher law, and its high frequency end is in good agreement with the result of the dielectric measurement in the literature. The correlation between the observed thermal expansion coefficients and the glass transition temperature is discussed based on the free volume theory. The sound velocity and attenuation were accurately determined as a function of the temperature by Brillouin scattering by combination with the refractive index measurement. The relaxation dynamics were discussed by considering the relaxation from segmental motions. All of these physical properties were discussed based on the third-order anharmonicity and the Grüneisen parameter.     

Electro-Optical and Thermophysical Characterization of Poly (Tripropylene Glycol Di-Acrylate)/Liquid Crystal Composite Materials Prepared by Polymerization Induced Phase Separation

Abstract

This work examines the development and characterization of tripropylene glycol di-acrylate/liquid crystal E7 (TPGDA/LC E7) PDLCs composite materials (polymer-dispersed-liquid-crystals). These systems were produced by UV irradiation photopolymerization (PIPS) of a mixture of the monomer tripropylene glycol di-acrylate (TPGDA) and the liquid crystal E7 (LC E7, a mixture of three cyano-biphenyl and one cyano-terphenyl LCs), in the presence of 2?wt% (of the acrylate/E7 mixture) of a photoinitiator. Electro-optical, thermal and optical characterization was used to understand the effect of the LC concentration on the electro-optical and thermo-physical properties of these materials. Polarizing optical microscopy (POM) and differential scanning calorimetry (DSC) studies were performed to observe the system morphology and to determine the transition temperatures of these materials, both as a function of their composition. The findings showed a slight variation of the nematic-isotropic transition temperature, T_NI, of the LC E7 and of the glass transition temperature, T_g, of the TPGDA polymeric matrix as a function of the mass percentage of the LC E7. A very good electro-optical response for the composition 30/70?wt % TPGDA/LC E7 was obtained.     

Novel materials for bioanalytical and biomedical applications: Environmental response and binding/release capabilities of amphiphilic hydrogels with shape‐persistent dendritic junctions

The binding and release capabilities of a hydrogel series, constructed of hydrophilic poly(ethylene glycol) segments and hydrophobic dendritic junctions [poly (benzyl ether)s], are evaluated in aqueous media. The environmental response of the amphiphilic networks is also tested in water at three pH values: 1.5, 7.0, and 10.1. The highest swelling ratio is observed under acidic conditions and varies between 3.7 and 6.5, depending on the crosslinking density and dendrimer generation. Gel specimens with embedded indicators react within 3–6 s with a clear color switch to the change in the pH of the surrounding medium. The experiments with model anionic and cationic indicators and stains show that the hydrogels have basic interiors. The gel binding capabilities depend on the water solubility of the substrate and on the size of the incorporated dendritic fragments. Model release studies have been performed at 37 °C and pHs 1.5, 7.0, and 10.1. The observed phenomena are explained by the transformations in the structure and charge that both the networks and the model compounds undergo with the changes in the pH of the aqueous medium. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4017–4029, 2005     

Kinetic Investigation of Poly(ethylene glycol) Hydrogel Formation via Perfusion‐Based Frontal Photopolymerization: Influence of Free‐Radical Polymerization Conditions on Frontal Velocity and Swelling Gradients

Poly(ethylene glycol) diacrylate (PEGDA) hydrogels are extensively used as scaffolds in tissue engineering. The ability to spatially control hydrogel properties is critical for designing scaffolds that direct cell behavior and tissue regeneration. To this end, we have recently developed a polymerization technique, perfusion‐based frontal photopolymerization, to generate tunable gradients in PEG hydrogels. This study explores the effects of polymerization conditions on the velocity of the propagating front and its influence on gradients in hydrogel swelling. Alterations in photoinitiator perfusion rate result in the largest variations in frontal velocity and in the magnitude of the swelling gradient among all polymerization conditions investigated.

     

Novel Method for Soluble‐Polymer‐Supported Synthesis of 3,4,5‐Trisubstituted Isoxazoles

A practical and efficient liquid‐phase synthesis of 3,4,5‐trisubstituted isoxazoles using poly(ethylene glycol) as supported is described. Soluble‐polymer‐supported nitrile oxide generated in situ reacted with chalcones to afford polymer‐supported isoxazolines, which were cleaved by sodium methoxide to generate 3,4,5‐trisubstituted isoxazoles instead of 3,4,5‐trisubstituted isoxazolines. This sequential process provided a novel method to synthesize 3,4,5‐trisubstituted isoxazoles.