Synthesis of Fullerene-Acrylamide Copolymer Nanoball and Its Lubrication Properties

A novel fuUerene-acrylamide copolymer was synthesized via radical polymerization. It is soluble in polar solvents such as water, dimethyl sulfoxide etc. The product was characterized by FTIR, UV-Vis and GPC. TEM analysis shows that the average particle diameter is about 46 nm. Four-ball tests show that the addition of a certain concentration of the fullerene copolymer to base stock (2 wt% triethanolamine and 0.5 wt% OPZ aqueous solution) can effectively raise the load-carrying capacity (PB value) and the antiwear ability. SEM analysis shows that the addition results in reducing diameter of wear scar and decreasing wear.     

Hygrometric Determination of Water Activities, Osmotic and Activity Coefficients, and Excess Gibbs Energy of the System MgSO4–K2SO4–H2O

Ternary aqueous solutions of MgSO₄ and K₂SO₄ have been studied by the hygrometric method at 25°C. The relative humidity of this system is measured at total molalities from 0.35 mol-kg^–1 to about saturation for three ionic-strength fractions (y = 0.25, 0.50, and 0.80 of MgSO₄. The data allow calculation of water activities and osmotic coefficients. From these measurements, the Pitzer ionic mixing parameters are determined and used to predict the solute activity coefficients in the mixture. The results are used to calculate the excess Gibbs energy at total molalities for ionic-strength fraction y.     

Design of a combined ozone/electron beam process for waste water and economic feasibility of the process

A design of a combined ozone/electron beam irradiation process for treating a 50 m³/h waste water stream from a molasses processing is discussed. Moreover, a cost evaluation of such a process in comparison to a conventional ozonation/biology treatment process has been performed to assess the potential of the irradiation process for technical use. Although the result of this comparison is not bad for the irradiation process an implementation into a full scale plant would not seem to be the thing to do in the present case.     

Different catalysis role of in‐loop and out‐of‐loop waters in assisting HNS/HSN proton transfer isomerizations: Bridging vs. surrounding effect

In this work, a density function theory (DFT) study is presented for the HNS/HSN isomerization assisted by 1–4 water molecules on the singlet state potential energy surface (PES). Two modes are considered to model the catalytic effect of these water molecules: (i) water molecule(s) participate directly in forming a proton transfer loop with HNS/HSN species, and (ii) water molecules are out of loop (referred to as out‐of‐loop waters) to assist the proton transfer. In the first mode, for the monohydration mechanism, the heat of reaction is 21.55 kcal · mol^?1 at the B3LYP/6‐311++G** level. The corresponding forward/backward barrier lowerings are obtained as 24.41/24.32 kcal · mol^?1 compared with the no‐water‐assisting isomerization barrier T (65.52/43.87 kcal · mol^?1). But when adding one water molecule on the HNS, there is another special proton‐transfer isomerization pathway with a transition state 10T′ in which the water is out of the proton transfer loop. The corresponding forward/backward barriers are 65.89/65.89 kcal · mol^?1. Clearly, this process is more difficult to follow than the R–T–P process. For the two‐water‐assisting mechanism, the heat of reaction is 19.61 kcal · mol^?1, and the forward/backward barriers are 32.27/12.66 kcal · mol^?1, decreased by 33.25/31.21 kcal · mol^?1 compared with T. For trihydration and tetrahydration, the forward/backward barriers decrease as 32.00/12.60 (30T) and 37.38/17.26 (40T) kcal · mol^?1, and the heat of reaction decreases by 19.39 and 19.23 kcal · mol^?1, compared with T, respectively. But, when four water molecules are involved in the reactant loop, the corresponding energy aspects increase compared with those of the trihydration. The forward/backward barriers are increased by 5.38 and 4.66 kcal · mol^?1 than the trihydration situation. In the second mode, the outer‐sphere water effect from the other water molecules directly H‐bonded to the loop is considered. When one to three water molecules attach to the looped water in one‐water in‐loop‐assisting proton transfer isomerization, their effects on the three energies are small, and the deviations are not more than 3 kcal · mol^?1 compared with the original monohydration‐assisting case. When adding one or two water molecules on the dihydration‐assisting mechanism, and increasing one water molecule on the trihydration, the corresponding energies also are not obviously changed. The results indicate that the forward/backward barriers for the three in‐loop water‐assisting case are the lowest, and the surrounding water molecules (out‐of‐loop) yield only a small effect. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

痕量砷流动注射在线还原氢化物发生原子吸收测定

方法采用流动注射停流技术使水及土壤浸出液中Ａｓ（Ｖ）在线还原为Ａｓ（Ⅲ），不经手工还原，用氢化物发生原子吸收光谱法直接测定砷的含量。含４ｍｏｌ／Ｌ ＨＣｌ的样品溶液与３０％碘化钾溶液在编结式反应器中混合，并在采样环中停流４０ｓ，达完全还原后注入到载流中与硼氢化钠反应，采样速度５５次／ｈ，检出限（３δ）０．１μｇ／Ｌ，对自来水和土壤浸出液的加标回收结果满意。     

Semiglobal simplex optimization and its application to determining the preferred solvation sites of proteins

The classical simplex method is extended into the Semiglobal Simplex (SGS) algorithm. Although SGS does not guarantee finding the global minimum, it affords a much more thorough exploration of the local minima than any traditional minimization method. The basic idea of SGS is to perform a local minimization in each step of the simplex algorithm, and thus, similarly to the Convex Global Underestimator (CGU) method, the search is carried out on a surface spanned by local minima. The SGS and CGU methods are compared by minimizing a set of test functions of increasing complexity, each with a known global minimum and many local minima. Although CGU delivers substantially better success rates in simple problems, the two methods become comparable as the complexity of the problems increases. Because SGS is generally faster than CGU, it is the method of choice for solving optimization problems in which function evaluation is computationally inexpensive and the search region is large. The extreme simplicity of the method is also a factor. The SGS method is applied here to the problem of finding the most preferred (i.e., minimum free energy) solvation sites on a streptavidin monomer. It is shown that the SGS method locates the same lowest free energy positions as an exhaustive multistart Simplex search of the protein surface, with less than one-tenth the number of minizations. The combination of the two methods, i.e.. multistart simplex and SGS, provides a reliable procedure for predicting all potential solvation sites of a protein.     

Enthalpies of solvation for N-alkylamides in water and in carbon tetrachloride at 25°C

Molar enthalpies of solution at infinite dilution have been determined at 25°C for several N-alkyl and N,N-dialkylamides in water and in carbon tetrachloride, using a Calvet-type rotating calorimeter, and solution concentrations below 5×10^–2 molal. Relevant enthalpies of transfer between the two solvents also have been derived. Molar enthalpies of solvation have been obtained by adding enthalpies of vaporization to solution values. Results are compared with those of other laboratories on other substituted amides, and their dependence on the number of carbon atoms in the chain is discussed. A possible computation of solvation enthalpies of functional groups is suggested and results for hydration of peptide or similar groups present in the compounds examined are discussed in terms of current models of their hydration and hydrogen bond formation.Presented at the sixth Italian meeting on Calorimetry and Thermal Analysis (AICAT) held in Naples, December 4–7, 1984.     

Aggregation effects on evaporation and the air/water interface of dodecyltrimethylammonium hydroxide solutions

 The system dodecyltrimethylammonium hydroxide (DTAOH)–water was studied by surface tension, ion-selective electrodes and evaporation in an electrobalance. Results confirmed earlier conclusions about a stepwise aggregation mechanism in DTAOH solutions. The aggregation process started at a total concentration C _T=(2.51±0.10)×10^-4 mol dm^-3) which probably corresponds to the formation of dimers. At C _T= (1.300±0.041)×10^-3 mol dm^-3 there was a change in the surface and evaporation behavior, corresponding to the formation of small, fully ionized aggregates which grew with increasing concentration. At C _T= (1.108±0.010)×10^-2 mol dm^-3 the formation of true micelles with hydroxide counterions in the Stern layer did not change significantly the evaporation and adsorption behavior. This means that between this concentration and C _T=(3.02±0.28)× M28.8n10^-2 mol dm^-3, the changes in structure were gradual. At the latter concentration there was a sudden change in the monolayer state at the air/water interface, with a strong surfactant desorption, and a major change in evaporation behavior. The changes are compatible with the formation of few, large aggregates reducing the total concentration of kinetically independent solute units, which in turn increased the activity of the solvent. This phenomenon is in agreement with literature information. The reduction in the evaporation rate of water was mainly due to the reduction of the water activity, caused by colligative effects. The reduction of the effective area available for evaporation had only a slight effect in water evaporation. Received: 9 January 1997 Accepted: 19 October 1997     

Influence of Cycle Temperatures on the Thermochemical Heat Storage Densities in the Systems Water/Microporous and Water/Mesoporous Adsorbents

The adsorption equilibrium of water on microporous adsorbents (zeolites of NaA-, NaY- and NaX-type as well as their ion exchanged forms) and on mesoporous adsorbents (different silica gels and composite material i.e. silica gel + salt hydrate) has been studied experimentally and theoretically. Using the Dubinin theory of pore filling the characteristic curves of the adsorption systems and other relevant dependences such as isotherms, isobars, isosteres and the curve of the differential heat of adsorption were calculated. For all systems investigated the adsorption were calculated. A_ads and the desorption potential A_des of the closed heat storage system were estimated. These values define the working range of the adsorption/desorption cycle and allow to calculate the specific heat storage density Δ h_sp. On the basis of Δ h_sp the different adsorbents were compared in order to select the optimal porous storage material for a given application. The presented experimental and theoretical investigations show that the adsorption systems water-zeolite and water-composites are promising working pairs for thermochemical heat storage processes for hot tap water supply and space heating of single family dwellings. The advantage of the water-composite system is the low desorption temperature (solar energy) the main shortcoming the low temperature lift. The advantage of the water zeolite system is the high temperature lift, the shortcoming are the relative high desorption temperatures.     

多种维生素的高效液相色谱分离及应用

在ＳｐｈｅｒｉｓｏｒｂＣ１８柱上，采用含Ｌｉ２ＳＯ４－己烷磺酸钠－三乙胺的水溶液作流动相，同时分离测定四种水溶性维生素：Ｂ１、Ｂ２、Ｂ６及烟酰胺。四种化合物的回收率在９９．２％～９９．９％之间，ＲＳＤ为０．１６％～０．４９％（ｎ＝５）。方法应用于常见的复合维生素药物制剂的含量测定，结果满意。