核电厂更衣室冷冻水系统优化设计

针对在建核电厂的更衣室冷冻水系统,通过计算分析,并结合工程实践经验,对原有设计进行了优化和改进.总结出适用于核电厂冷冻水系统设计的有用结论,包括:系统供回水温度的适当调整、气源热泵技术的有效利用以及模块化冷水机组的合理引入.这些结论目前均已有效地应用于在建核电项目的施工设计中,同时,对于国内其他行业内的冷冻水系统设计也...     

The structure and dynamics of water inside armchair carbon nanotube

In this paper we present some simulation results about the behaviour of water molecules inside a single wall carbon nanotube (SWNT). We find that the confinement of water in an SWNT can induce a wave-like pattern distribution along the channel axis, similar phenomena are also observed in biological water channels. Carbon nanotubes(CNTs) can serve as simple nonpolar water channels. Molecular transport through narrow CNTs is highly collective because of tight hydrogen bonds in the protective environment of the pore. The hydrogen bond net is important for proton and other signal transports. The average dipoles of water molecules inside CNTs (7,7), (8,8) and (9,9) are discussed in detail. Simulation results indicate that the states of dipole are affected by the diameter of SWNT. The number of hydrogen bonds, the water--water interaction and water--CNT interaction are also studied in this paper.     

水喷射淬冷高温壁面的传热实验研究

本文采用直接表面温度测量的方法对水喷射高温壁面的传热过程进行实验研究．系统地研究了射流出口速度、冷却水过冷度、喷嘴至加热面的间距、初始壁温以及水喷雾的流量密度等参数对淬冷表面的膜态沸腾、最小临界点、过渡沸腾、最大临界点等传热过程的影响，给出了有关实验结果，分析了它们的特点。     

蒸汽侧循环给水加热系统的综合优化

1前言联合循环中蒸汽侧循环给水加热系统的综合优化是总系统整体优化必不可少的重要环节。虽然也有一些相关的研究，但至今仍很不充分，对给水加热系统的设计多凭经验进行，依赖于设计者的直觉而缺乏科学的依据。另外，对不同的蒸汽循环系统，其给水加热系统差异很大；而增压流化床燃煤联合循环PFBC—CC［‘］中给水加热系统比较复杂，为多加热源，不仅要合理抽汽加热，还要充分利用燃机的排气余热。再者，PFBC—CC是以蒸汽侧循环为主的联合循环，蒸汽侧循环给水加热系统的优化对整个系统性能的改善有更大的意义。本文以复杂的PFBC—…     

弯曲导管束在“水窗”及附近软X光的响应测量

测量了弯曲导管对“水窗”波段及其附近的X光响应,圆弧弯曲导管束对X光在“水窗”段有较大传输效率,而对“水窗”之外的高能X光响应较小,研究表明,X光在“水窗”段的响应,可以是在“水窗”之外的高能X光的响应的5倍,这种弯导管有可能用于同步辐射中,“过滤”掉白光高能部分,而直接输出较强的“水窗”段X光.     

Time saving fluid dynamic predictions in a wetting-drying process: A hypothesis for vertisols

This paper is aimed at investigating the effect of the initial water content in a vertisol sample on the whole wetting-drying process leading the system to a change in volume. In order to do this, an experimental setup was realized and employed with very thin soil layers wetted from below (“per ascensum”). The results show that the effect of the initial water content on the swelling-shrinkage process is to shift the corresponding curve e-ϑ towards bigger-smaller values of the humidity but does not seem to affect the dynamics of the process. The text was submitted by the authors in English.     

PTS装置工作模式及波形调节

为了对即将建成的PTS装置的实验能力进行分析,对装置的工作模式及波形调节能力进行了分析。装置具有三种工作模式:短脉冲模式、长脉冲模式和波形调节模式。在不同的工作模式下,装置可以进行不同负载的实验研究。在基本工作模式下,在15 nH负载上输出前沿90 ns、幅值8~10 MA脉冲电流。通过电路模拟,对装置在三种工作模式下预计的负载电流输出进行了分析,短脉冲模式下装置负载电流的上升时间约90 ns,长脉冲模式时约200 ns,波形调节模式时可以达到400 ns。模拟结果表明,通过调节激光触发气体开关的触发方式和脉冲输出开关及装置其他参数,PTS装置可以输出脉冲前沿100~400 ns、波形形状在一定范围可调的强电流脉冲。     

冰的熔解热实验中冰水质量比的探讨

冰与温水质量比对冰的熔解热实验的成败起着关键作用。文章对冰水质量比进行测量和分析,得出了冰的熔解热实验中最适合的冰水质量比的范围约为1／12-1／5。     

Spin echo SPI methods for quantitative analysis of fluids in porous media

Fluid density imaging is highly desirable in a wide variety of porous media measurements. The SPRITE class of MRI methods has proven to be robust and general in their ability to generate density images in porous media, however the short encoding times required, with correspondingly high magnetic field gradient strengths and filter widths, and low flip angle RF pulses, yield sub-optimal S/N images, especially at low static field strength. This paper explores two implementations of pure phase encode spin echo 1D imaging, with application to a proposed new petroleum reservoir core analysis measurement.In the first implementation of the pulse sequence, we modify the spin echo single point imaging (SE-SPI) technique to acquire the k-space origin data point, with a near zero evolution time, from the free induction decay (FID) following a 90° excitation pulse. Subsequent k-space data points are acquired by separately phase encoding individual echoes in a multi-echo acquisition. T₂ attenuation of the echo train yields an image convolution which causes blurring. The T₂ blur effect is moderate for porous media with T₂ lifetime distributions longer than 5 ms. As a robust, high S/N, and fast 1D imaging method, this method will be highly complementary to SPRITE techniques for the quantitative analysis of fluid content in porous media.In the second implementation of the SE-SPI pulse sequence, modification of the basic measurement permits fast determination of spatially resolved T₂ distributions in porous media through separately phase encoding each echo in a multi-echo CPMG pulse train. An individual T₂ weighted image may be acquired from each echo. The echo time (TE) of each T₂ weighted image may be reduced to 500 μs or less. These profiles can be fit to extract a T₂ distribution from each pixel employing a variety of standard inverse Laplace transform methods. Fluid content 1D images are produced as an essential by product of determining the spatially resolved T₂ distribution. These 1D images do not suffer from a T₂ related blurring.The above SE-SPI measurements are combined to generate 1D images of the local saturation and T₂ distribution as a function of saturation, upon centrifugation of petroleum reservoir core samples. The logarithm mean T₂ is observed to shift linearly with water saturation. This new reservoir core analysis measurement may provide a valuable calibration of the Coates equation for irreducible water saturation, which has been widely implemented in NMR well logging measurements.