呋喃西林水溶液在光和热作用下的稳定性

The influence of both light and heat on the stability of nitrofurazone aqueous solution was studied. Results show that in either heating experiments or the exposure to light at high temperatures, the degradation rate obeyed zero-order kinetics. The total rate constant ktotal caused by both light and heat can be divided into two parts: ktotal =kdark klight, where kdark and klight are the degradation rate constants caused by heat and light, respectively. The klight can be expressed as klight=Alight*exp(-Ea,light/RT)*E, where E is the illuminance of light, and Alight and Ea,light both are experimental constants. The values of these kinetic parameters were determined based on the experiments in the dark and upon exposure to three different light sources. Results show that the values of Alight and Ea, light varied with the light source. To save time, labor, and drugs, exponential heating experiments were employed and compared with the isothermal experiments. Results indicated that kinetic parameters obtained by exponential heating experiments are comparable to those obtained by isothermal experiments either in the dark or upon exposure to light.     

Low-temperature synthesis of allyl dimethylamine by selective heating under microwave irradiation used for water treatment

Low-temperature synthesis of allyl dimethylamine (ADA) by selective heating under microwave irradiation (MI) used for water treatment is investigated. The effect of MI, ultrasound irradiation (UI) and conventional heating on yield of ADA, reaction time and the flocculation efficiency of polydiallyl dimethylammunion chloride (PDADMAC) prepared form ADA were studied. The results show that by selective heating at low temperature, MI not only increases yield of ADA and reduces reaction time, but also greatly enhances the flocculation efficiency of PDADMAC.     

Ultrafast,Low‐Cost,and Mass Production of High‐Quality Graphene

Fast, mass, and low‐cost production of high‐quality graphene, which is alluring, remains a great challenge, even though some approaches have shown potential for mass synthesis of graphene. Very recently a great breakthrough was made by Tour and co‐workers (Nature 2020, 577, 647–651): in just a second, easily exfoliated and highly crystalline graphene was produced from abundant carbon‐containing species by cost‐effective flash Joule heating with a low energy input of 7.2 kJ per gram graphene. Such an ultrafast, economic, and scalable process for high‐quality graphene production can be considered as a milestone in the graphene field and is highlighted in this article.     

Microwave assisted preparation of efficient activated carbon from grapevine rhytidome for the removal of methyl violet from aqueous solution

Grapevine rhytidome (the outer layer of bark on trunk), as an abundant and low-cost precursor, was used to prepare granular activated carbon with high surface area for the removal of methyl violet from aqueous solution. Microwave heating source was used to reduce the treatment time and energy consumption. To optimize the preparation, the effects of the different parameters, such as phosphoric acid concentration, acid/precursor weight ratio, impregnation time, microwave power, radiation time, and oven heating time on the ability of the samples for removal of methyl violet were studied. The obtained activated carbon was characterized by N₂ adsorption/desorption, SAXS, TEM and SEM methods. The adsorption of methyl violet onto the activated carbon was studied from both equilibrium and kinetic point of view and the results were compared with the commercial granular activated carbon. The rate of adsorption onto the prepared activated carbon was faster than commercial activated carbon. Different kinetic models were used to analyze the experimental kinetic data. The obtained activated carbon showed higher adsorption capacity (more than twice) for the adsorption of methyl violet in comparison with the commercial one. The equilibrium data were analyzed using different isotherm models. Adsorption was found to be maximum in the pH range 7-9.     

Development of novel synthetic method of carbon nanotubes from electrospun polystyrene fibers by using microwave heating

We have developed a novel synthetic method that enables us to easily synthesize metal‐capsulated carbon nanotubes (CNTs) in a laboratory by using a combined technology of electrospinning‐metallization and microwave heating. These techniques greatly shorten the time for the synthesis of the CNTs in comparison with the conventional methods. TEM analysis confirmed a successful formation of the CNTs, and the resulting CNTs were multi‐walled and found to be about 25–100 nm in diameters. The products prepared by heating at 600 and 900°C exhibited less‐developed and strongly curved CNTs, whereas the products prepared by heating at 700 and 800°C relatively well‐developed long CNTs. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of Microwave Heating Technique to Esterification

Introduction Although the application of microwave technique has been reported as a new type of energy source chemically, it is only in recent years that this technique has been used as the energy source for organic synthesis. In 1986, R. Gedye, et al., published the report of the benzoate synthesis from the respective reactions between benzene carboxylic acid and methanol, propanol or butanol under microwave heating and the catalysis of H_2SO_4.     

A Dynamic Analysis and Numerical Simulation of Explosive Development of an Extratropical Cyclone Over Land

The present paper has made a dynamic and diagnostic study of the process of explosive deepening of an extratropical cyclone over North China on April 25-26, 1983, in order to gain an insight into the physical mechanism of explosive development of cyclone over land. It turns out that this cyclone occurred in the strong baroclinic zone, and the vorticity and thermal advection triggered the initial development of the cyclone. Subsequently, as the rainfall increased, the effect of condensational heating became more and more important. During the time period of rapid intensification (from 1200GMT 25 to 0000GMT 26 April, 1983, the central surface pressure fell down from 998. 2 to 988. 3 hPa), the peak of diabatic heating profile continuously descended, leading to a rapid increase in heating amount in the lower troposphere. This condition is favorable to the explosive development of rotational circulation or vortex. The numerical simulations have further demonstrated the importance of the lowering of heating p     

Microwave-assisted synthesis of new pyrimido[4′,5′：4,5]thiazolo[3,2-α] benzimidazol-4（3H）-one derivatives in solvent-free condition

Microwave-assisted synthesis of new 2-arylpyrimido[4′,5′：4,5]thiazolo[3,2-α]benzimidazol-4（3H）-ones from 3-aminothia- zolo[3,2-α]benzimidazol-2-earboxamide and aroyl halides in solvent-free condition is described. In comparison with classical conditions the reactions are faster and the yields are higher under microwave irradiation.     

Synthesis, structure of [H3dien]·(MF6)·H2O (M=Cr, Fe) and Fe Mössbauer study of [H3dien]·(FeF6)·H2O

Single crystals of [H₃dien]·(FeF₆)·H₂O (I) and [H₃dien]·(CrF₆)·H₂O (II) are obtained by solvothermal synthesis under microwave heating. I is orthorhombic (Pna2₁) with a=11.530(2) Å, b=6.6446(8) Å, c=13.787(3) Å, V=1056.3(2) Å³ and Z=4. II is monoclinic (P2₁/c) with a=13.706(1) Å, b=6.7606(6) Å, c=11.3181(9) Å, β=99.38(1)°, V=1034.7(1) Å³ and Z=4. The structure determinations, performed from single crystal X-ray diffraction data, lead to the R₁/wR₂ reliability factors 0.028/0.066 for I and 0.035/0.102 for II. The structures of I and II are built up from isolated FeF₆ or CrF₆ octahedra, water molecules and triprotonated amines. In both structures, each octahedron is connected by hydrogen bonds to six organic cations and two water molecules. The iron-based compound is also characterized by ⁵⁷Fe Mössbauer spectrometry: the hyperfine structure confirms the presence of Fe³⁺ in octahedral coordination and reveals the existence of paramagnetic spin fluctuations.     

离子热法合成分子筛的研究进展

离子热法是以离子液体或低共熔混合物为介质的一种新型的分子筛合成方法, 它提供了一种离子态的独特合成环境, 为合成新型分子筛及研究分子筛的生成机理提供了机会. 本文综述了离子热法在分子筛合成方面取得的一些进展, 包括合成方法的创新、合成机理的研究、新材料的合成以及新型催化剂的制备等, 并展望了其发展前景.