不同调节剂制备MOF-Fe的性质及对Se（Ⅳ）的吸附性能

以HF、HCl、H₂O和NaAc溶液为调节剂合成了4种MOF-Fe样品,用X射线衍射（XRD）、透射电镜（TEM）、N₂等温吸附-脱附、综合热分析（TG/DTG和DTA）和质子电位滴定研究了4种样品的结构与表面性质,以及对亚硒酸根（Se（Ⅳ））等温吸附特性。MOF-Fe（HF）、MOF-Fe（HCl）、MOF-Fe（H₂O）和MOF-Fe（NaAc）四种样品均具有八面体MIL-100（Fe）的晶体结构,但它们的结晶度和晶面取向略有差异。4种样品的比表面积分别为1 683、1 517、1 641和1 734 m²·g^-1,其总孔体积依次降低,微孔孔径分别为1.27、1.22、1.22和1.17 nm。MOF-Fe（HF）样品的脱羧基失重峰温度最高（415℃）,苯环碳化失重峰温度最低（462℃）;MOF-Fe（HCl）、MOF-Fe（H₂O）和MOF-Fe（NaAc）样品出现了因氧化铁被碳还原所致的失重平台（566~716℃）。样品悬浮液从pH=6.0降到3.0时,消耗H⁺的量表现为MOF-Fe（H₂O） > MOF-Fe（HCl） > MOF-Fe（HF）=MOF-Fe（NaAc）,它们的电荷零点（pH_ZPC）依次为3.1、3.5、3.6和3.5。MOF-Fe（NaAc）、MOF-Fe（HCl）、MOF-Fe（H₂O）和MOF-Fe（HF）对Se（Ⅳ）的吸附亲和力依次减小,它们对Se（Ⅳ）的吸附容量（Q_m）分别为77.69、107.07、117.40和87.15 mg·g^-1。显著性分析显示,MOF-Fe的羟基密度与样品吸附Se（Ⅳ）的Q_m显著正相关。研究结果表明,MOF-Fe样品的结构热稳定性和羟基/配位水分子等活性位点密度受合成样品时加入的调节剂影响,用HF作为调节剂合成MOF-Fe样品有利于提高样品中羧基与苯环之间的C-C键合强度和热分解产物的稳定性,降低苯环碳化温度;HCl和H₂O作为调节剂有利于提高样品的活性位点密度,可提高MOF-Fe样品对Se（Ⅳ）吸附容量。     

Application of poly(vinylphenyltrimethylammonium tribromide) resin as an efficient polymeric brominating agent in the α-bromination and α-bromoacetalization of acetophenones

The applications of a new supported tribromide reagent based on poly(vinylbenzyltrimethylammonium hydroxide) resin (Amberlite 717) were reported. This supported tribromide resin was used directly in α-bromination and α-bromoacetalization of acetophenones without any other catalyst under mild conditions. The effects of solvents and the amount of the supported tribromide resin on the reactions were investigated. Under the optimal conditions, most of α-bromo and α-bromoacetal of acetophenones were selectively obtained in excellent yields.     

Synthesis and Biological Evaluation of Novel Isonucleosides with 1,2,4‐Triazole‐3‐Carboxamide

Novel 1,2,4‐triazole isonucleosides (1 and 2) were efficiently synthesized starting from D‐ribose and D‐xylose, respectively. The key steps were condensation of cyclic sulfate 8 with methyl‐1,2,4‐triazole‐3‐carboxylate and nucleophilic displacement of the tosylate 15 with methyl‐1,2,4‐triazole‐3‐carboxylate, respectively.     

Efficient and Industrially Viable Synthesis of Donepezil

An efficient, economically viable process has been developed for large‐scale preparation of donepezil HCl (1), an anti‐Alzheimer's agent. The process involves the condensation of 5,6‐dimethoxy‐1‐indanone (3) and 1‐benzyl‐4‐piperidinecarboxaldehyde (4) in the presence of alkalimetal carbonates at elevated temperature to yield 1‐benzyl‐4‐[(5,6‐dimethoxy‐1‐indanone)‐2‐yidenyl] methyl piperidine (2), the key intermediate in the synthesis of donepezil. Hydrogenation of 2 yields donepezil.     

PCC-Promoted Dehydration of Aldoximes: A Convenient Access to Aromatic,Heteroaromatic, and Aliphatic Nitriles

A simple and convenient procedure for the synthesis of nitriles by dehydration of aldoximes using a PCC (pyridiniumchlorochromate) has been developed. A variety of aromatic, heteroaromatic, and aliphatic aldoximes are converted.

Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the full spectral details.     

Synthesis of gemini surfactants with twelve symmetric fluorine atoms and one singlet F MR signal as novel F MRI agents

A family of fluorinated gemini surfactants derived from perfluoropinacol has been synthesized as novel ¹⁹F magnetic resonance imaging (¹⁹F MRI) agents. These fluorinated surfactants with 12 symmetric fluorine atoms and one singlet ¹⁹F MR peak can be conveniently prepared from perfluoropinacol and oligo(ethylene glycols) on multi-gram scales. Solubility, hydrophilicity (log P), and critical micelle concentration (CMC) measurements of these fluorinated surfactants indicated that high aqueous solubility can be achieved by introducing oligo(ethylene glycols) with appropriate length into perfluoropinacol, i.e., manipulating the fluorine content (F%). One of these fluorinated surfactants with high aqueous solubility and excellent ¹⁹F MR properties has been identified by ¹⁹F MRI phantom experiments as a promising ¹⁹F MRI agent.     

Poly(ethylene terephthalate) waste derived chemicals as an antistripping additive for bitumen – An environment friendly approach for disposal of environmentally hazardous material

The increasing accumulation of poly(ethylene terephthalate) polymer and poor recycle/disposal practices have made them omnipresent and a major culprit for environmental pollution. Currently global research efforts are focused on primary and secondary recycling of PET waste or through landfills. Chemical recycling of PET through hydrolytic or aminolytic route has been attempted by many researchers however with limited end applications. In our investigations we have used PET waste as a synthon and chemically converted it through a new non-catalytic route into several benzamide derivatives. We have successfully tested them for antistripping performance in bitumen. Our results as elaborated in the paper indicate a comparable performance of the new chemistry products based on PET, to commercially used antistripping chemicals. Our research work thus opens a new route for the recycling of used PET in bituminous concrete roads which may help in alleviating a major environmental problem and disposal of waste PET polymer in large scale.     

The Hydrotrope Action of Vitamin C

The effects of vitamin C are determined in the oil-in-water(0/ W) and water-in-oil(W/ 0) microemulsion regions of CTAB/ pentanol/ p-xylene/ H20 system. The addition of Vc joins the O/ W and W/ O areas in the phase diagram and expands the bicontinous region by reducing the lamellar liquid crystal one. The results show that the “ coupling action” of Vc is in fact a structural transition from lamellar crystal to isotropic phase with W/ O, O/ W and bicontinous structure.     

以四甲基铵硅酸盐为柱化剂合成层柱状MCM-36分子筛

以层状MCM-22P为前驱体,四甲基铵硅酸盐为柱化剂,采用动态水热法考察了MCM-36分子筛的合成条件,并通过XRD、N2物理吸附、TEM、27Al-MAS NMR以及NH3-TPD等手段对合成分子筛进行了表征。结果表明,与传统的采用正硅酸乙酯为柱化剂的柱化过程相比,以四甲基铵硅酸盐为柱化剂时,已溶胀的前驱体不经干燥处理即可直接在含水体系进行柱化插层合成得到层间距均一的层柱状MCM-36分子筛,适宜的合成条件为:先在80℃的高pH值(约13.5)环境下对前驱体溶胀24 h,然后在100℃下柱化插层24 h。表征结果表明,MCM-36分子筛具有层内微孔和层间介孔的复合孔道结构以及较大的比表面积(特别是外比表面积);与HMCM-22相比,HMCM-36的表面酸性虽明显降低,但其层间介孔结构的形成使大量B酸中心暴露于大分子易于接近的层间介孔孔壁,可为涉及较大分子的催化反应提供更多可接近的活性位中心。     

润湿剂促进燃煤细颗粒声波团聚脱除的实验研究

在声波团聚室中研究了润湿剂液滴与细颗粒碰撞团聚脱除特性,提出了一种利用润湿剂促进细颗粒在声波场中捕集的新方法。结果表明,不同润湿剂溶液对细颗粒在声波场中的团聚脱除效果存在较大差异,采用JFC和FS-310润湿剂溶液时,细颗粒分级脱除效率与采用水时的分级脱除效率相近。而SDS和Silanol w22溶液,则可有效提高细颗粒在各粒径段的分级脱除效率。细颗粒在声波场中的脱除效率与润湿剂润湿性能具有很好的相关性,随润湿剂对细颗粒相对接触角增大而降低,在声压级为150 dB时,相对接触角由83°降低到0°,细颗粒脱除效率提高了18%,在无声场作用下,脱除效率仅提高了5%。细颗粒脱除效率随声压级的增大而提高,在低声压级条件下,添加润湿剂可有效提高细颗粒脱除效率,声压级在130 dB时,添加SDS溶液液滴后细颗粒脱除效率比声场单独作用时的脱除效率提高了25%。表明添加润湿剂可有效提高细颗粒在声波场中的团聚脱除效率,实现在低声压级条件下,获得高的细颗粒脱除效率。