Novel functional activities of anti-dna autoantibodies from sera of patients with lymphoproliferative and autoimmune diseases

DNA-hydrolyzing activity of IgG autoantibodies from sera of patients with various types of lymphoproliferative diseases was investigated. The association of DNA-hydrolyzing activity with the antibody (Ab) fraction has been proved by newly developed affinity-capture assay. Study of abzyme incidence in blood tumors and systemic lupus erythematosis (SLE) revealed linkage of anti-DNA Ab catalysts to mature B-cell tumors, and increased probability of DNA-abzymes formation on the background of autoimmune manifestations. These data suggest possible similarity between mechanisms of abzyme formation in SLE and B-cell lymphomas. A new mechanism of formation of DNA-specific catalytic Abs has been proposed based on the increased crossreactivity of polyclonal DNA-abzymes to DNA-depleted nuclear matrix proteins. The possibility of the abzyme production as Ab to the energetically destabilized ground state of the antigen has been discussed. Preliminary results were obtained that indicate the complement-independent cytotoxicity of anti-DNA autoantibodies isolated from blood of patients with SLE and chronic lymphocytic leukemia.     

Surface cavities produced by high‐dose nitrogen ion implantation into silicon

Nitrogen ion implantation (24 keV, 4.6 × 10¹⁷ cm^?2) into (100) a p‐type silicon wafer material and a subsequent electron beam annealing at 1100 °C for 15 s under high vacuum conditions leads to the formation of an uneven surface in the implanted region caused by nitrogen bubbles beneath the surface. Annealing at 1200 °C for 300 s results in surface cavities with a mean diameter of 350 nm and a surface coverage of 3–4% and an average depth of ～60 nm. Nuclear reaction analysis reveals that the nitrogen concentration in the as‐implanted state exceeds 57 at%, the value of stoichiometric Si₃N₄. Annealing at 1100 °C for 15 s slightly reduces the nitrogen peak concentration, whereas annealing at 1200 °C for 300 s induces a significant alteration to the shape of the nitrogen depth profile coupled with the lowering of the concentration close to the stoichiometry of Si₃N₄. The results present a new method of producing sub‐micrometre cavities embedded in a thin silicon nitride film on wafer silicon which may lead to novel micro‐electronic and biotechnology applications. Copyright © 2007 John Wiley & Sons, Ltd.     

Accurate values for the nonrelativistic energies of the lowest singlet and triplet S-states of the4He-Isotop

Accurate lower and upper bounds for the nonrelativistic lowest energies¹ E ₀ and³ E ₀ of the singlet and triplet-system of the⁴He-Isotop are calculated with the linearized method of variance minimization. The same was done for¹ E ₁ the energy of the first excitedS-state 2¹ S. The results especially for¹ E ₀ and³ E ₀ in a.u. are −2.9033076997₅ ≤¹ E ₀ ≤ −2.9033076921₈ −2.1749324263₇ ≤³ E ₀ ≤ −2.1749324245₉ i.e. the values are determined with an absolute error smaller than 0.00167 cm⁻¹ for¹ E ₀ and 0.00039 cm⁻¹ for³ E ₀.     

Design of a combined ozone/electron beam process for waste water and economic feasibility of the process

A design of a combined ozone/electron beam irradiation process for treating a 50 m³/h waste water stream from a molasses processing is discussed. Moreover, a cost evaluation of such a process in comparison to a conventional ozonation/biology treatment process has been performed to assess the potential of the irradiation process for technical use. Although the result of this comparison is not bad for the irradiation process an implementation into a full scale plant would not seem to be the thing to do in the present case.     

Construction of recombinant Escherichia coli strais for production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate)

Plastic wastes constitute a worldwide environmental problem, and the demand for biodegradable plastics has become high. One of the most important characteristics of microbial polyesters is that they are thermoplastic with environmentally degradable properties. In this study, pUC 19/PHA was cloned and transformed into three different Escherichia coli strains. Among the three strains that were successfully expressed in the production of polyhydroxyalkanoates (PHA), E. coli HMS174 had the highest yield in the production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (P[HB-HV]). The cell dry weight and PHA content of recombinant HMS174 reached as high as 10.27 g/L and 43% (w/w), respectively, in fed-batch fermentor culture. The copolymer of PHA, P(HB-HV), was found in the cells, and the biopolymers accumulated were identified and analyzed by gas chromatography, proton nuclear magnetic resonance spectroscopy, and differential scanning calorimetry. We demonstrated clearly that the E. coli host for PHA production has to be carefully selected to obtain a high yield. The results obtained indicated that a superior E. coli with high PHA production can be constructed with a desirable ratio of P(HB-HV), which has potential applications in industry and medicine.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

Characteristics of major dioxin/furan congeners in melted slag of ash from municipal solid waste incinerators

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in slag of fly ash from three municipal solid waste (MSW) incinerators were analyzed to observe any changes in characteristics and distribution of their congeners by melting process. Actual concentration and Toxic Equivalent (TEQ) concentration profiles of 17 major congeners of PCDDs/PCDFs for gas, fly ash and melted slag were compared. The distributions of PCDDs/PCDFs in different streams macroscopically showed similarities with the generally known profiles for emission gas from a municipal waste incinerator. The total concentrations of PCDDs/PCDFs in off-gas and fly ash have been known to be a function of incineration conditions and of air pollution control device utilization; however, their normalized distributions were independent of such conditions. The concentrations of PCDDs/PCDFs in the melted slag of fly ash were not related to the concentrations of PCDDs/PCDFs congeners in fly ash but were rather a function of the melting furnace type and operation. The total amount of PCDDs/PCDFs in the melted slag of fly ash contained almost 150–27,000 times less dioxin than that in fly ash, however, the TEQ of dioxin in the slag was reduced by 435–43,500 times, which could enable them to be utilized as recycled construction materials. In normalized TEQ concentration profiles of 17 congeners of PCDDs/PCDFs, the ratio of PCDFs to PCDDs changed from 1.32 to 2.19 by melting, which showed relatively higher portion of furans left in melted slag than those in fly ash. By comparing reduction ratios of different congeners, PCDDs (dioxins) were relatively easier to destruct than PCDFs (furans) during melting process. The most difficult congener to destruct could be octa-chlorinated dibenzofuran (OCDF) among major congeners. For slag cooling methods, dioxin concentration in TEQ of slow cooled slag by air was four times higher than that of fast cooled slag by water. Thus cooling by water is more appropriate with the added beneficial effect of producing granules/particles, which can be utilized as roadbed materials.     

The Use of Thermogravimetry in the Study of Rubber Devulcanization

Thermogravimetry was employed to study the changes occurring in rubber vulcanizates during devulcanization carried out by microwave treatment, a new promising method of recycling rubber waste. The thermogravimetric parameters T _i , T ₅ and T _p and the compositions of devulcanizates in comparison with vulcanizates were determined. The results obtained allowed estimation of the degree of destruction of the polymer chains in response to microwave treatment and permitted establishment of the most advantageous conditions of devulcanization in order to obtain the best properties of rubber devulcanizates for reuse in rubber processing. The results demonstrated that thermogravimetry is a very useful method for investigation and control of the microwave devulcanization process. This revised version was published online in August 2006 with corrections to the Cover Date.     

A new route for the functionalisation of wood through transesterification reactions

A novel transesterification reaction between acetylated maritime pine sapwood (Pinus pinaster Soland) and methyl benzoate (MB), in the presence of dibutyltin oxide (DBTO) as a catalyst, was performed. Reaction was confirmed by Fourier-transform infrared spectroscopy (FTIR) and ¹³C nuclear magnetic resonance cross-polarisation with magic-angle spinning (NMR CP MAS) analysis: signals corresponding to benzoylated wood were identified and, when transesterification was performed with ethyl trimethylsilylacetate (ETMSA), characteristic trimethylsilyl groups were detected. The acetyl/benzoyl exchange rate was found to increase with increasing amount of DBTO, temperature and reaction time and a concurrent deterioration of the woody material was evidenced.     

Relative K-homology and K-homology of an ideal

We provide a straightforward proof of one of the main results of the Baum-Douglas K-homology theory: If A is a separable nuclear C ^*-algebra and I an ideal of A, then the natural restriction map K ⁰(A, I) K ⁰(I) is an isomorphism of Abelian groups.