考虑订单取件时间和柔性时间窗的取送货车辆路径问题

研究了同城配送中考虑订单取货时间和柔性时间窗的取送货车辆路径问题,考虑同城配送中订单起终点,订单取货时间和订单配送的柔性时间窗,车容量限制等因素。首先构建以配送成本与超时惩罚成本之和最小化为目标的混合整数线性模型。其次,设计了含多种有效不等式及其对应分离算法的改进分支切割算法对该模型进行精确求解。最后通过实验测试分析了不等式的性能,验证了算法的有效性,实验表明适当的减少车辆数和增大装载能力能够有效的减少成本。     

Toward separation of nuclear spin isomers with coherent light.

We propose an approach for separating nuclear spin isomers with coherent light and illustrate it by numerical calculations using fulvene as a model system. The scheme employs the equivalence of torsion and interchange of equivalent H-atoms in a class of molecules of which fulvene is a simple example. The exchange symmetry couples with the rotational symmetry to produce a spatial distinction between the two photo-excited nuclear spin isomers, and wavepacket interferometry is applied to separate the species.     

Solvent effects on 17O nuclear magnetic shielding: N-methylformamide in polar and apolar solutions

The solvent effect on ¹⁷O isotropic shielding was computed by different methods: the polarizable continuum model and a mixed approach, including a few real solvent molecules treated as the solute. The experimental data show that the behavior of protic and aprotic solvents is markedly different: we found that the continuum approach describes well the observed shielding at various dielectric constants for aprotic solvents, while the mixed procedure is needed when hydrogen bonds to the magnetic centre are present.Contribution to the Jacopo Tomasi Honorary Issue     

Low-Field NMR Relaxation Analysis of High-Pressure Ethane Adsorption in Mesoporous Silicas

Understanding the behaviour of short-chain hydrocarbons confined to porous solids informs the targeted extraction of natural resources from geological features, and underpins rational developments in separation, storage and catalytic conversion processes. Herein, we report the application of low-field (12.7 MHz) ¹H nuclear magnetic resonance (NMR) relaxation measurements to characterise ethane dynamics within mesoporous silica materials exhibiting mean pore diameters between 6 and 50 nm. Our measurements provide NMR-based adsorption isotherms within the range 25–50 bar and at ambient temperature, incorporating the ethane condensation point (40.7 bar at our experimental temperature of 23.6 °C). The quantitative nature of the acquired data is validated via a direct comparison of NMR-derived excess adsorption capacities with ex situ gravimetric ethane adsorption measurements, which are demonstrated to agree to within 0.2 mmol g⁻¹ of the observed ethane capacity. NMR relaxation time distributions are further demonstrated as a means to decouple interparticle and mesopore dominated adsorption phenomena, with unexpectedly rapid relaxation rates associated with interparticle ethane gas confirmed via a direct comparison with NMR self-diffusion analysis.     

MgCl2 Enhances Cluster Formation by Nanoscale Toroidal DNA Condensates

Multivalent cations can cause DNA to condense from its extended state in solution into high-density toroid-shaped particles. Developing methods to control the size and size distribution of DNA toroids is an important goal for the development of artificial gene delivery systems. Here we demonstrate that changes in salt conditions, prior to condensation by multivalent cations, can significantly affect DNA condensation. Specifically, millimolar concentrations of MgCl₂ are shown to cause the formation of toroid clusters, whereas NaCl at the same ionic strength does not.     

聚L－谷氨酸－炔诺酮肟酯复合体的制备

合成了聚Ｌ－谷氨酸－炔诺酮肟酯的复合体，炔诺酮的接入量为２２．８％．体外释放时间约１５大。     

Microwave assisted low temperature synthesis of sodium zirconium phosphate (NaZr<Subscript>2</Subscript>P<Subscript>3</Subscript>O<Subscript>12</Subscript>)

Sodium zirconium phosphate [NaZr₂P₃O₁₂], a potential ceramic matrix for fixation of high level nuclear waste, was synthesized by heating the mixture of sodium carbonate [Na₂CO₃], zirconyl nitrate hydrate [ZrO(NO₃)₂·5H₂O] and ammonium dihydrogen phosphate [NH₄H₂PO₄] in air, in a resistance heated furnace and a microwave heating system respectively in the temperature range 450 to 650°C. The mixture heated for 1 h in a resistance furnace at 450°C yielded a poorly crystalline NaZr₂P₃O₁₂ [NZP]. Increasing the temperature to 650°C produced a highly crystalline product. The same mixture heated in a microwave oven at 450°C for 1 h however, yielded the most crystalline NZP.In an alternate method, the mixture of sodium dihydrogen phosphate (NaH₂PO₄), zirconium dioxide (ZrO₂) and diammonium hydrogen phosphate [(NH₄)₂HPO₄] heated in resistance furnace at 650°C for the same period did not react in air. It also did not yield the pure product at 450°C when heated in microwave assembly for 1 h.The authors thank the Board of Research in Nuclear Sciences (BRNS) of the Department of Atomic Energy (DAE) for the financial support for this work under the project No. 2000/37/19/BRNS/1959 dtd09-02-02.     

A new poly(2-hydroxy-3-phenoxypropylacrylate, 4-hydroxybutyl acrylate, diethyl maleate) membrane controlled clonidine linear release in the transdermal drug delivery system

Oral clonidine, used as an antihypertensive, can result in some side effects such as dry mouth, drowsiness, dizziness and sedation; thus, clonidine transdermal drug delivery (TDD) was considered. Use of the controlled release membrane was one of the methods in TDD systems to regulate the permeation properties. A new type of copolymer membrane that controlled clonidine linear release in TDD system was synthesized by UV radiation. This membrane consisted of three monomers: 2-hydroxy-3-phenoxypropylacrylate, 4-hydroxybutyl acrylate and diethyl maleate. The membrane had both fine permeation properties and perfect physical properties when three monomers were in the weight ratio of 4:4:2; this type of membrane was chosen as an optimized membrane. It was found that the membrane controlled clonidine zero-order release, the permeation rates decreased with the thicknesses of membranes increasing, and the permeation rates were linearly dependent on the square root of the concentration of clonidine. Furthermore, the optimized membranes were characterized by FTIR, DSC and SEM.     

可生物降解聚合物药物释放数学模拟研究进展

由于可降解的聚合物作为药物载体可以使得药物释放具有较高的靶向性、药物释放更加平缓 ,特别是可以使一些不稳定、半衰期短的药物在人体内达到可控制释放的效果 ,因此将可降解聚合物应用于药物释放体系中作为药物载体得到了较深入的研究。随着研究的深入 ,通过数学方法模拟或预测聚合物载体的降解过程以及聚合物降解过程中药物的释放行为是控释体系设计与应用的一个重要发展方向。由于影响因素较多 ,将所有因素逐一考虑将使得数学模型过于庞杂而失去实际意义 ,所以一个数学模型通常只考虑最主要几个的影响因素 ,并对药物释放系统进行相应的假设。目前文献中报道的降解 (溶蚀 )控制药物释放体系的数学模型大致可以分为两类 :假设药物释放按照零级过程 (zeroorderprocess)进行的经验模型和考虑影响药物释放的多种物理化学过程(如局部传质、化学反应 )的理论模型。本文综述了这些理论模型及其研究进展     

月光花素甲(Ⅰ)、(Ⅱ)整体分子结构的测定

本文对月光花素甲(Calonyctin A)的整体分子结构分析加以完善并进行总结。前文报道月光花素甲是两个分子量相差28a.m.u的糖甙类同系物分子的混合物。这两个分子(简称M_1和M_2)分别称为月光花素甲(Ⅰ)与月光花素甲(Ⅱ)(Calonyctm A_1,CalonyctinA_2),分子量分别为938与910。它们分别含