Triton X-100存在下镉试剂分光光度法测定痕量铊(III)

本文首次提出了在Triton X-100存在下, 以镉试剂作显色剂于水相直接分光光度法测定了痕量铊, 结果表明: 该体系具有很高的灵敏度, 是目前分光光度法测定铊的最灵敏方法之一.     

A Model Calculation for the Isomerization and Decomposition of Chemisorbed HCN on the Si(100)-2×1 Surface

Ab initio molecular orbital and hybrid density functional theory calculations have been performed to study the adsorption, isomerization, and decomposition of HCN on Si(100)-2×1 using the Si₉H₁₂ cluster model of the surface. The results of our calculations indicate that the HCN can adsorb molecularly without a barrier onto the surface with both end-on (LM1) and side-on (LM2) positions. LM1 can isomerize to LM2 with a small barrier of 8 kcal/mol. The isomerization of LM2 by H-migration from C to the N atom, requires 76 kcal/mol activation energy (c.f. 47.5 kcal/mol in the gas phase) because of surface stabilization. Both HCN(a) and HNC(a) end-on adsorbates were found to dissociate readily, as concluded in our earlier experiment, to produce H and CN adspecies. The computed vibrational frequencies of HCN, CN, and also HCNH adspecies agree reasonably well with those observed experimentally. HCNH was found to be stable, with either the C or the N attaching to the surface.     

In-situ observation of an ordered sulfate adlayer on Au(100) electrodes

An ordered adlayer of sulfate or bisulfate has been found on the unreconstructed Au(100) surface in 0.1 M H₂SO₄ by in-situ STM. The ordered adlayer is formed concomitantly with lifting of the (hex)-reconstruction. The new structure consists of sulfate/bisulfate rows that run parallel to the edges of the islands that were created during the (hex)→(1×1) transition. The distance between the adions within the rows is 4.0±0.3 Å, and that between rows 10.4±0.7 Å, corresponding to a superstructure with a surface coverage of about 0.2.     

Imaging of chemical reactivity and buckled dimers on Si(100)2×1 reconstructed surface with noncontact AFM

We have investigated the force interactions between the Si tip and the Si(100)2×1 reconstructed surface in the noncontact atomic-force microscopy (AFM) measurement. We observed two types of frequency shift curves without and with discontinuity, similar to the Si(111)7×7 surface. The image contrast changes drastically whether the frequency shift curve shows discontinuity or not. In the case of the frequency shift curves without discontinuity, the noncontact AFM images almost reflect the surface topography including dimers and adsorbates. In the case of the frequency shift curves with discontinuity, they reflect strongly the chemical reactivity of surface. Furthermore, in the case of the frequency shift curves without discontinuity, for the first time, the stabilize-buckling of dimers induced by a defect can be observed. This suggests that the force interactions during the noncontact AFM measurement hardly influence the surface dynamics.     

Temperature-programmed surface reaction (TPSR) of CH4 synthesis by PdxNi100−x nanoparticles

A series of Pd_xNi_100−x nanoparticles were prepared by the co-precipitation method and analyzed using a temperature-programmed surface reaction (TPSR) of their methanation reactions. ESCA measurement suggested that the as-prepared Pd-Ni alloys had Pd-core/Ni-shell structure. Surface Pd segregation occurred during H₂ reduction and resulted in a surface composition close to the nominal value. The TPSR experiments were performed by pre-adsorption of CO with H₂ to form methane. The peak temperature of methanation increased as Pd content increased, indicating that a methanation reaction is favored on Ni and Ni-rich alloy nanoparticles. For physical mixtures of Pd and Ni nanoparticles, methanation behaviors is similar to those of alloy nanoparticles; but the methanation temperatures of physical mixtures are always higher than those of alloy nanoparticles. This may be due to the formation of a Pd-enriched alloy surface layer during reduction in H₂ at 400 °C, or because the CO molecules adsorbed on the Pd sites spill over onto the Ni sites for methanation. Using TPSR technique and measuring methanation temperature, the top-most surface of such bimetallic nanoparticles can be probed.     

Charge transfer of 1 ML C60/Ag（100）

We have measured the synchrotron radiation photoelectron spectra of monolayer C60on Ag（100）, By calculating the intensity ratios between the LUMO bands and the two deeper bands （HOMO and HOMO- 1）, we estimate the amount of the charges transferred from Ag（100） to C60 within the range of 1 e to 1.8 e. The results dismay the expectation of surface superconductivity and afford a good reference for further studies of the monolayer C60/Ag（100） system.     

Effects of various competing ligands on the kinetics of trace metal complexes of Laurentian Fulvic Acid in model solutions and natural waters

The objective of this work was to study the effects of the following Ligands: Chelex-100, Dowex MAC-3 and Dowex 50WX-8 using Competing Ligand Exchange Method. This objective was achieved by investigating complex dissociation kinetics of trace metals: Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Mn(II) and Pb(II) of a well-characterized Laurentian Fulvic Acid (LFA) in model solutions and in a natural waters of Lake Heva (Québec, Canada). The effects of variation in the competing ligands (including their quantities) on the complex dissociation kinetics were quantitatively characterized by their first-order dissociation rate coefficients. The kinetic lability of the metal complexes varied with the metal-to-LFA ratio, as expected from the theory of metal complexes of the chemically and physically heterogeneous complexants, LFA. The general trend in the metal-binding by the above competing ligands was: Dowex 50WX-8 > Chelex-100 > Dowex MAC-3. However, no difference was found between the Dowex 50WX-8 and Chelex-100 for Cd(II), Zn(II), and Co(II). The results revealed the importance of the quantity of Chelex-100 as a competing ligand in the metal(II)-LFA complexation, on the dissociation kinetics of these complexes in model solutions. By developing Competing Ligand Exchange Method as an analytical technique, for studying the relative affinities of the above competing ligands for metals complexation in natural waters this work has made a substantial contribution to analytical chemistry.     

Dynamic versus static ultrasonic sample treatment for the solid-liquid pre-concentration of mercury from human urine

Dynamic and static ultrasonic procedures involving ultrasonic bath and tandem focused ultrasound (i.e. two probes were used in the same sample treatment) have been assessed in order to implement a reliable solid-liquid back extraction of mercury from commercial resins (dowex and chelex-100), previously used to concentrate Hg(II) from treated urine. The urine had been previously treated with an advanced oxidation process provided by the conjunction of potassium permanganate, hydrochloric acid and high intensity focused ultrasound, which allowed that organic matter degradation was achieved in less than 3 min. 95 ± 10% of mercury in the certified urine and 97 ± 6% of the spiked methyl-mercury was recovered with the dowex resin plus the static ultrasonic procedure, whilst 96 ± 11% of the spiked mercury was recovered with the dowex resin plus the dynamic procedure, for which ultrasonication was not necessary. The Hg pre-concentration factor used in this work was 8 (20 mL of urine to 2.5 mL of acid), but different volume ratios can be used in order to increase this factor.     

Mechanism of the oxidation of d-glucose onto colloidal MnO2 surface in the absence and presence of TX-100 micelles

Aqueous colloidal manganese dioxide (MnO₂) was prepared via titration by using potassium permanganate and sodium thiosulphate in aqueous neutral medium. The kinetics of oxidation of d-glucose onto the surface of colloidal MnO₂ have been studied spectrophotometrically. The results show that the rate of initial stage (nonautocatalytic path) increases with increasing the [d-glucose], [H⁺], and temperature and also upon addition of nonionic surfactant Triton X-100 (TX-100), which indicates that the surfactant enhances the concentration of d-glucose at the surface of the colloidal MnO₂. Hydrogen bonding interaction seemingly arises between –OH groups of d-glucose and oxygen of the ether linkages of polyoxyethylene chain of TX-100. A possible mechanism of the oxidative degradation of d-glucose is discussed in terms of d-glucose/TX-100 and colloidal MnO₂ interaction.