正、负离子表面活性剂混合体系溶致液晶生成的相行为

研究了烷基(C8,C12,C14)三甲基溴化铵、烷基(C12,C14)溴化吡啶与烷基(C8,C12)硫酸钠混合体系溶致液晶形成的条件与结构的变化.在高浓度的水溶液中,随着正、负离子表面活性剂摩尔比接近于1,液晶结构由六角相过渡为层状相.表面活性剂非极性链长改变,对相行为影响显著,短碳链的正、负离子表面活性剂混合体系,在等摩尔比时,体系为层状液晶或立方液晶为主,夹杂少许沉淀.随碳链增长,两类表面活性剂间的静电吸引效果表现为生成沉淀的摩尔比例范围变宽,沉淀量增多,共存的液晶相减少,甚至消失.若只改变正离子的极性头基,季胺盐比吡啶盐与烷基硫酸盐的作用要强,形成不溶物的混合摩尔比例范围更宽.     

Phase behavior and solution properties of sodium (3-dodecanoyloxy-2-hydroxy-propyl) succinate in water

Sodium (3-dodecanoyloxy-2-hydroxy-propyl) succinate (SLGMS) is a conjugated anionic surfactant in which a glycerol residue connects with a hydrophilic sodium succinate and dodecanoate. Aqueous micellar phase (W_m), hexagonal (H₁), bicontinuous cubic (V₁), and lamellar (L_α) phases are successively formed with increasing the surfactant concentration in a binary SLGMS-water system. The Krafft point is below 0 °C. The effective cross sectional area per surfactant molecule, a _s, in the H₁ phase is almost constant, 0.5 nm², and the shape of cylindrical micelle is almost unchanged with surfactant concentration. The cmc value of SLGMS measured by means of surface tension, electrical conductivity, and fluorescence probe methods is in the range of 4∼9 × 10⁻⁵ mol/l that is much lower than that of sodium dodecanoate, 2 × 10⁻² mol/l, or SDS, 8 × 10⁻³ mol/l. Hence, it is considered that the polar glycerol part in the SLGMS acts as a hydrophobic part. The solubilization of oil in the SLGMS solution is much higher than that in the SDS solution and this also suggests that the glycerol and succinic units act as lipophilic moieties. Received: 15 June 2000/Accepted: 27 July 2000     

一种金属络合性表面活性剂及其cu(ⅱ)配合物的合成和抗菌性

以对甲酚、月桂酸、乙二胺等为原料,通过酰化、Fries重排、磺化和缩合等反应,合成了一种含席夫碱结构的新型络合性表面活性剂,合成总产率为39．2％,以该表面活性剂为配体与Cu~(2 )作用形成配合物,产率为87．6％。测定了该表面活性剂在20℃时不同浓度下的表面张力和发泡高度,结果表明该物质具有较高的表面活性,其临界胶束浓度CMC为2．5×10~(-4)mol/L,其水溶液的最低表面张力为30 mN/m;用可见分光光度法测定了该表面活性剂铜配合物在25℃0．01 mol/L硼砂缓冲溶液中的生成稳定常数β为1．91×10~8,实验表明该表面活性剂与Cu~(2 )易形成稳定的配合物;用浓度稀释法测试了该配合物对大肠杆菌、金黄色葡萄球菌和白色念珠菌的抗菌活性,实验表明该配合物对白色念珠菌的抗菌力最高,其最小杀灭浓度为96．1×10~(-6)g/mL。     

Effect of water hardness on the interaction of cationic dye with anionic surfactants

ABSTRACT

The effect of water hardness causing ions on the critical micelle concentration (cmc) of surfactants was studied using conductivity measurement. Spectrophotometric and conductometric studies of dye and surfactant interaction under the influence of water hardness causing ions were also investigated. It was found that with increasing hardness in water, cmc of the surfactants tends to decrease. The change in the colour of the solution was observed as the degree of hardness increases. Hardness of water can consider as a major contributor of fading or change in colour during washing and cleaning of dyed material. Dye in a surfactant solution containing varying amount of hardness causing ions undergoes a blue shift in the visible region and red shift in ultraviolet region. The comparison between sodium dodecylsulphate (SDS) and saponin natural surfactant showed that turbidity was observed only in the aqueous solution of SDS in the presence of very hard water.     

微乳凝胶中小分子传质研究

微乳凝胶中小分子传质研究对于拓宽胶束酶学研究内涵、加速酶在生物合成与转化领域中的应用、研制高性能生物传感器等具有重要理论意义和潜在应用价值.以微乳液中二价金属离子与紫脲酸胺之间的配位反应为指示反应,采用分光光度技术,研究了金属离子在由阳离子表面活性剂十六烷基三甲基溴化胺构建的微乳凝胶中的传质问题.结果表明,在由含紫脲酸胺微乳液及含金属离子微乳凝胶构成的体系中,金属离子在微乳凝胶中的传质是金属离子与紫脲酸胺配位反应的限速步骤.为进一步证实上述结论,还对影响金属离子在微乳凝胶中传质的各种因素(如微乳液中水与表面活性剂的摩尔比值、分散相中甘油与水的配比等)进行了研究,结果也证实了上述结论.     

Synthesis of sugar oxime ether surfactants

A straightforward synthesis of a novel class of sugar surfactants is described. The key step is the chemoselective condensation of a hydrophobic alkoxyamine with the resident aldehyde/ketone moiety on a hydrophilic sugar. Neither protection/deprotection of the sugars nor extensive product purification is required. The method allows for the facile adjustment of hydrophobic and hydrophilic domains of the sugar oxime ether surfactant and uses inexpensive, readily accessible, and renewable materials.     

可聚合非离子型表面活性剂的合成及其性能

由甲苯二异氰酸酯、丙烯醇和不同分子量的聚乙烯醇合成了3种可聚合非离子表面活性剂（Ⅱ-PEG400、Ⅱ-PEG1000和Ⅱ-PEG2000）,用FT-IR对分子结构进行了表征。 结果表明,随聚乙烯醇分子量的增加,非离子表面活性剂的电导率显著增加、表面张力由36.28 mN/m降低至31.30 mN/m、浊点由39.6 ℃增加至58.9 ℃,对丙烯酸丁酯(BA)、甲基丙烯酸甲酯(MMA)和甲基丙烯酸丁酯(BMA)的乳化能力均优于常用乳化剂OP-10,以AIBN作引发剂在70 ℃下既能均聚又可与丙烯酸酯进行共聚反应。     

疏水改性智能水凝胶P(NIPA-co-DiAB)的合成及其温敏行为

以N-异丙基丙烯酰胺(NIPA)和N,N-双烯丙基苄胺(DiAB)为共聚单体、N,N-亚甲基双丙烯酰胺(BIS)为交联剂、十二烷基硫酸钠(SDS)为表面活性剂、过硫酸铵(APS)-四甲基乙二胺(TMEDA)为氧化还原引发体系,采用自由胶束交联共聚法合成了疏水基团为芳香基的疏水改性温敏性智能水凝胶P(NIPA-co-DiAB)。研究了DiAB摩尔分数(x(DiAB))对水凝胶溶胀性能的影响。 在初始溶胀阶段,随着x(DiAB)由0增大至3%,P(NIPA-co-DiAB)水凝胶的溶胀行为由Fickian扩散转变为non-Fickian扩散。x(DiAB)分别为0、1%、2%和3%时,P(NIPA-co-DiAB)水凝胶的平衡溶胀率SR0在蒸馏水中分别为63.6、93.5、141.6和167.4,在0.01 mol/L SDS溶液中分别为63.1、71.0、59.0和77.5,在CTAB溶液中分别为37.6、42.2、44.1和60.0,在Triton X-100溶液中分别为30.9、49.4、68.5和88.3。 结果表明,P(NIPA-co-DiAB)水凝胶的(SR0)大于PNIPA水凝胶,且在蒸馏中比在0.01 mol/L表面活性剂溶液中要大。 加入0.01 mol/L Triton X-100、CTAB或SDS后,PNIPA水凝胶的体积相变温度或较低临界溶解温度(LCST)由32.5 ℃分别增加至35.4、45.6和80 ℃。P(NIPA-co-DiAB)水凝胶的LCST由32.0～32.5 ℃分别增加至34.7～35.6 ℃、45.8~46.2 ℃和80 ℃。 加入表面活性剂能增加P(NIPA-co-DiAB)水凝胶的体积相变温度,高的体积相变温度与DiAB含量无关。     

胶束液相色谱法测定制剂和尿样中布洛芬

采用胶束液相色谱法分离和测定制剂和尿样中布洛芬,考察了表面活性剂的种类及浓度、柱温、流动相pH值,流速对布洛芬色谱保留行为的影响,探讨并提出了布洛芬在吐温-80为非离子表面活性剂的胶束液相色谱中的色谱保留模型。以ZORBAXExtend-C18色谱柱(4.6mm×250mm,5μm),20mmol.L-1吐温-80和25mmol.L-1磷酸氢二钾(pH7.8)混合溶液为流动相,在263nm处进行测定,布洛芬的保留时间为5.8min。布洛芬的质量浓度在0.2～1.0g.L-1范围内呈线性关系,检出限(3S/N)为1.1ng,平均回收率达98.3%～102.1%。     

ZnIn_2S_4的制备及其表面活性剂辅助的形貌控制生长

采用湿化学合成路线以巯基乙酸为包覆剂,水为溶剂制备了六方相ZnIn2S4。应用能谱分析(EDS)、X射线衍射(XRD)、透射电镜(TEM)、扫描电镜(SEM)和紫外-可见光谱对产物的组成、结构、形貌和光学性质进行了表征。结果表明,所得到的ZnIn2S4具有层状形貌。这些层状物是由ZnIn2S4纳米粒子前驱体在热处理过程中聚集生长而成的。另外,以ZnIn2S4纳米粒子前驱体为起始原料,借助表面活性剂的导向作用在固/液界面成功地实现了ZnIn2S4的形貌控制生长,得到了具有棒状、棒簇状、管簇状形貌的ZnIn2S4。根据实验结果,初步讨论了可能的表面活性剂辅助的ZnIn2S4形貌控制生长的机制。