Characterization and quantitation of mixtures of alkyl ether sulfates and carboxylic acids by capillary electrophoresis with indirect photometric detection

The separation, characterization, and determination of mixtures of alkyl ether sulfates (AES) and fatty acids (C10-C16) in background electrolytes (BGEs) containing acetonitrile (ACN)-water mixtures is addressed. Due to inhibition of the ionization of the carboxylate groups, the migration time and the resolution between the fatty acids decreased when the water content of the BGE was reduced, but efficiency and resolution between the AES oligomers improved. The migration times increased and resolution improved by substituting 5% ACN by an equivalent amount of dioxane. A complete separation of the two surfactant classes, up to the AES oligomers with 8 ethylene oxide units (EOs) with respect to C10, with excellent resolution between the AES oligomers, while preserving a satisfactory resolution between the fatty acids, was achieved with a BGE containing 5 mM trimethoxybenzoic acid, 7 mM dipentylamine, 85% ACN, 5% dioxane, and 10% water. The two surfactant classes were increasingly resolved by further reducing the water content of the BGE. Thus, C2 (acetate) was resolved from the AES oligomers up to 7 EOs using 90% ACN and 5% dioxane, but the resolution between the heavier fatty acids was poor with this BGE. Identification of the AES oligomers was eased by the excellent regularity of the successive migration times; thus, within each AES subclass or series of oligomers with the same number of carbon atoms in the alkyl chain, the migration times decreased following a mild curve as the number of EOs increased. The way how the data obtained by indirect photometry (corrected peak areas that are proportional to the molar concentrations) should be managed to avoid systematic error when the calibration curve is constructed using an AES standard with an oligomer distribution different from that of the samples is discussed and equations are given. Decyl sulfate was successfully used as internal standard. The detection limits (S/N = 3) were of ca. 2 microM for individual AES oligomers.     

Pyrolysis study of fluorinated sol-gel silica

Fluorinated silica gels at various fluorine content were prepared via sol-gel by hydrolysis of 3,3,3-trifluoropropyltrimethoxysilane and tetraethoxysilane mixtures. The gels, of nominal stoichiometry Si(CH₂CH₂CF₃)_XO_(2-X/2)(X=0.1-1), were characterized by FT-IR, X-ray photoelectron spectroscopy (XPS) and N₂ adsorption analysis. The thermal stability of the fluorinated samples was investigated by coupling thermogravimetric measurements with mass spectrometric and gas chromatographic analyses of the evolved gaseous species. The chemical reactions occurring in the gel matrices during heating were siloxane chain rearrangements involving condensation between residual hydroxyl and ethoxyl groups in the 100-350°C temperature range, whereas the thermal decomposition of the fluoroalkyl groups were observed at higher temperatures (450-600°C). The release of the fluoroalkyl moieties also involved C-F/Si-O bond exchanges inside the siloxane chains, with gas-phase evolution of different fluorinated silicon units. This revised version was published online in July 2006 with corrections to the Cover Date.     

Evaluation of the factors affecting extraction of organic compounds based on the acid-induced phase cloud point approach

On the basis of a better analytical exploitation of acid-induced cloud point approach, a systematic study on the phase behaviour of acid aqueous solutions of anionic surfactants and factors affecting anionic surfactant-mediated extractions was performed. The anionic surfactants investigated were alkylsulphonates (ASS) with alkylchain lengths comprised between 8 and 16 carbon atoms. The critical hydrochloric acid concentration (minimal acid concentration required to separation in two liquid phases) was found to increase as alkylchain length of the anionic surfactant increased from 10 to 14. Non-acid-induced liquid-liquid phase separation was observed for sodium octanesulphonate (SOS) or sodium hexadecyl sulphonate (SHS) in the hydrochloric concentration range 0-10 M. Acid aqueous solutions of sodium decylsulphonate (SDeS) and sodium dodecylsulphonate (SDoS) separated into two liquid phases at temperatures ranging between 10 and 80 °C, while temperatures >35 °C were required for sodium tetradecylsulphonate. The influence on extraction efficiency and concentrating ability of experimental variables such as hydrophobicity and concentration of surfactant, nature and concentration of analyte, hydrochloric acid concentration, time and temperature of extraction and time of equilibration and centrifugation was examined. Advantages provided by anionic surfactant-mediated extractions over the use of non-ionic surfactants (cloud point extractions) are discussed.     

Effects of nonionic sugar surfactants on the phase transition of DPPC membranes

The influence of newly synthesized N-alkanoyl-N-methyllactitolamines (decanoyl [C₁₀MELA], lauoroyl [C₁₂MELA] and miristoyl [C₁₄MELA]) on the thermotropic phase transition of phosphatidylcholine bilayer was compared with common sugar-based surfactants N-dodecyl-β-d-glucopyranoside [C12G1] and decanoyl-N-methyl glucamide [MEGA-10]. The results indicate that C_nMELA are very active at the membrane surface and disturb the phospholipid bilayer structure less than commercially used MEGA-10 and C12G1.     

Sorption/diffusion behaviour of anionic surfactants in polyacrylamide hydrogels: from experiment to modelling

The sorption and diffusion processes of anionic surfactants with different chain length through polyacrylamide hydrogels with low swelling degree have been studied by electrical conductivity measurements. The multicomponent equilibrium equation has been used to model the sorption isotherms of different anionic surfactant in the hydrogels. Such isotherms show that initial rapid sorption of unimer surfactant into the membranes occurs, suggesting that non-freezing water can be involved in these interactions. In aqueous solution, at concentrations near and above the critical micelle concentration an anti-co-operative region is found. The diffusion coefficients of the anionic surfactants inside the hydrogel matrix show that the mobility of diffusing surfactant entities is dependent on cross-linker concentration and chain length. The Cukier hydrodynamic model and the free volume theory as modified by Peppas and Reinhart were applied to explain the dependence of the diffusion coefficients of surfactant on surfactant concentration inside the hydrogel. The hydrodynamic model was applied with success to the more hydrophilic surfactant, sodium 1-octanesulfonate, showing that the diffusion coefficients, D, increase when the resistance to hydrodynamic medium decreases; when the surfactant chain length increases (sodium dodecyl sulfate and sodium 1-hexadecane sulphonate) the variation of D with the free volume can only be understood considering the sieving effect produced by the surfactant inside gel.     

Rheological properties of the aqueous mixtures of cationic-anionic surfactants

The rheological properties of the aqueous mixtures of cationic-anionic surfactants, both in single-phase systems and in aqueous two-phase systems, have been studied. Bizarre rheological properties —negative thixotropy, viscoelasticity and hihg viscosity of shear rate dependent at relatively low concentration — have been observed. An unusual viscosity change, that is, viscosity lowering with increasing concentration, was obtained. The negative thixotropy might be due to the existence of lamellar or sheet-like micelles, viscoelasticity might be induced by rodlike and lamellar or sheet-like micelles, the high viscosity might be a consequence of the formation of network by long rodlike micelles and the concentration-induced viscosity lowering could be interpreted in terms of the decrease of micellar dimensions with concentration.     

Impact of micelles on the biocidal efficiency in a diesel–water interface

Biodegradation occurs in the diesel/water interface in petroleum product pipelines. The microbial contamination can result in inhibitor/fuel degradation, leading to unacceptable levels of turbidity, filter plugging, storage tank corrosion and stored product souring. Therefore, selection of the biocide/inhibitor plays an important role in the transportation of petroleum products through pipelines. Three biocides (cationic and nonionic) were employed to study the biodegradation in a diesel‐water interface. The biocidal efficiency against degradation of diesel was examined by employing Fourier‐transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and gas chromatography mass spectrometry (GC‐MS) techniques. Bronopol (2‐bromo‐2‐nitro‐propane‐1, 3‐diol) was found to have higher bactericidal efficiency than N‐cetyl‐N,N, N‐trimethyl ammonium bromide (CTAB) and cetyl pyridinum bromide (CPB). But the cationic biocides (CTAB and CPB) showed good biocidal efficiency at the interface. The data are explained in terms of a model that postulates the formation of a ‘micelle’ at the diesel‐water interface. Copyright © 2007 John Wiley & Sons, Ltd.     

阳离子无皂含氟丙烯酸酯的合成与表面性能

在合成甲基丙烯酸全氟辛酰氧基乙酯(FA)基础上,用半连续法制备了无皂阳离子含氟丙烯酸酯乳液。当乳液的粒径在100~200 nm、ζ电位大于40 mV时,乳液较稳定。阳离子亲水单体甲基丙烯酰氧乙基三甲基氯化铵(DMC)在含氟丙烯酸酯中质量分数为0.10~0.18、固含量小于20%时乳液的稳定性好,且随DMC含量的增加稳定性提高;含氟丙烯酸酯乳胶膜的附着力与耐磨性好,乳胶膜的透湿率随DMC的增加而增加。随热处理温度的提高,膜表面自由能下降;经160℃热处理后膜发生了交联,表面自由能为18 mN/m,与聚四氟乙烯(PTFE)的表面能相近,DMC含量对膜表面自由能影响不大。XPS分析也表明膜表面氟含量随热处理温度的提高而增加。     

Catalytic Spectrophotometric Determination of Ultratrace Amounts of Silver with Solubilizing Effect of Nonionic Surfactant

ＩｎｔｒｏｄｕｃｔｉｏｎＴｒｉａｚｅｎｅｒｅａｇｅｎｔｓａｒｅｉｎｔｅｒｅｓｔｉｎｇｂｅｃａｕｓｅｏｆｔｈｅｉｒｓｔｒｏｎｇｃｏｍｐｌｅｘａｔｉｏｎａｂｉｌｉｔｉｅｓｗｉｔｈｔｒａｎｓｉｔｉｏｎｍｅｔａｌｓ .1 6Ｈｏｗｅｖｅｒ,ｌｉｔｔｌｅｄｅｃｏｌｏｒａｔｉｏｎｏｆｔｈｅｍｃａｔａｌｙｚｅｄｂｙｓｉｌｖｅｒｉｏｎｈａｓｂｅｅｎｓｔｕｄｉｅｄｉｎａｎａｌｙｔｉｃａｌｃｈｅｍｉｓｔｒｙ .Ｍａｎｙａｎａｌ ｙｓｉｓｔｓｈａｖｅｒｅｐｏｒｔｅｄｔｈｅｕｓｅｏｆｃａｔａｌｙｔｉｃｒｅａｃｔｉｏｎｓｆｏｒｔ…     

Interaction of Fluorocarbon Containing Hydrophobically Mdified Polyelectrolyte with Nonionic Surfactants

The interaction of fluorocarbon containing hydrophobically modified polyelectrolyte(FMPAANa) with two kinds of nonionic surfactants(hydrogenated and fluorinated)in a semidilute (0.5wt%) aqueous solution had been studied by rheological measurements,Association behavior was found in both systems.The hydrophobic interaction of FMPAANa with fluorinated surfactant(FC171) is much stronger than that with hydrogenated surfactant(NP7.5) at low surfactoant concentrations.The interaction is strengthened by surfactants being added for the density of active junctions increased.Whereas distinct phenomena for FC171 and NP7.5 start to be found as the surfactants added over their respective certain concentration.The interaction of polyelectrolyte with fluorinated surfactant increases dramatical ly while that with hydrogenated surfactant decreases.