Study of the Impact Resistance of Physically and Dynamically Vulcanized Mixtures of PP/EPDM

Physically and dynamically vulcanized (TPV) mixtures of polypropylene (PP) and ethylene propylene diene terpolymer (EPDM) are prepared by extrusion in order to improve the impact resistance of PP. To enhance the chemical compatibility and provide better interaction between the PP and EPDM in the physical mixtures, both polymers are modified with maleic anhydride (MAH) in solution using xylene as solvent and dicumyl peroxide (DCP) as initiator. The qualitative and quantitative determination of the degree of grafting is study by Fourier Transform Infrared Spectroscopy (FTIR) and varying the amount of DCP and/or amount of MAH in order to determine the optimum amounts to obtain the highest degree of grafting. The effect of the relation of PP/EPDM, the amount of reinforcement filler and mix rate are studied for modified polymer mixtures (PP-g-MAH/EPDM-g-MAH). For the TPV of PP/EPDM the effects of amount and triallylisocyanurate (TAC) as coupling agent in presence of different amounts of DCP are studied. The physical mixtures of modified polymers prepared with a PP/EPDM ratio of 80/20 and the TPVs blends prepared with a PP/EPDM ratio of 70/30 and containing 15% filler at 60 rpm show the highest impact resistance. The impact resistance, melt flow index and hardness of the different mixtures are measured to determine their possible applications to prepare front panels and bumpers for automobiles by injection molding.     

Metallocenic copolymers of ethylene and 5,7‐dimethylocta‐1,6‐diene: Structural characterization and mechanical behavior

The relationship between the structure and mechanical properties has been established for several copolymers of ethylene and 5,7‐dimethylocta‐1,6‐diene synthesized with a metallocene catalyst. A dependence on the composition and polymerization temperature has been found. The branches cannot be incorporated into the orthorhombic crystal lattice, and consequently, structural parameters such as the crystallinity and crystal size are considerably affected as the 5,7‐dimethylocta‐1,6‐diene content increases in the copolymers. The viscoelastic relaxations have been analyzed and compared with those exhibited by high‐density polyethylene (HDPE). The β relaxation does not appear in HDPE and is exclusively seen in the copolymers. As the 5,7‐dimethylocta‐1,6‐diene content rises, the intensity of this process is increased, and its location is shifted to a lower temperature up to comonomer contents of approximately 6–8 mol % in the copolymers. On the other hand, the α mechanism associated with motion within the crystalline regions is also moved to a lower temperature and its intensity is diminished as the 5,7‐dimethylocta‐1,6‐diene molar fraction increases in the copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3797–3808, 2004     

On the compatibility of the IPP/PA6/EPDM blends with and without functionalized IPP I. Thermo-oxidative behaviour

Binary isotactic polypropylene (IPP)/polyamide 6 (PA6) and ternary IPP/PA6/ethylene–propylene diene terpolymer (EPDM) blends in various ratios were obtained in a Haake Rheocord mixer. Processing behaviour was changed in the presence of IPP functionalized with bismaleimide (BMI), maleic anhydride (MA) and acrylic acid (AA) as reactive compatibilizing agents. The thermal and thermo-oxidative behaviour of blends was studied by differential scanning calorimetry and thermogravimetry. The functionalized IPPs modify the crystallinity degree and the decomposition behaviour of both IPP and PA6 as a result of chemical reactions of functional groups with those of the PA6. The changes depend on the IPP/PA6 or IPP/PA6/EPDM ratio, the chemical nature and amount of the functionalized IPP. On the basis of the processing and thermal data one can conclude that the compatibilizing agent effect increases in the following order: IPP-AA 相似文献   

Formal aza-Michael additions to tropone: Addition of diverse aryl- and alkylamines to tricarbonyl(tropone)iron and [(C7H7O)Fe(CO)3]BF4

A formal aza-Michael addition to tropone by way of tricarbonyl(tropone)iron and/or the tetrafluoroborate salt formed via protonation of the complex is reported. Tricarbonyl(tropone)iron smoothly undergoes the direct aza-Michael reaction with unhindered aliphatic amines under solvent free conditions in good yields. Meanwhile, the known cationic complex [(C₇H₇O)Fe(CO)₃]BF₄ (whose reaction with a small number of nucleophiles was previously reported) undergoes addition with an even broader array of amine nucleophiles. Finally, it was discovered that protecting the aza-Michael adduct as a carbamate was necessary for oxidative demetallation of the complex.     

Parameters controlling the evaluation of polymeric coatings for carbon steel alloy

The efficiency of polymeric coatings as corrosion protective materials for carbon steel alloy in sea water was evaluated by different methods: electrochemical techniques (open circuit and potentiodynamic measurements), analytical and spectroscopic techniques (inductive coupled plasma, scanning electron microscopy and X‐ray diffraction). The study was made using ethylene propylene diene monomer (EPDM)/poly&!lpar;ethylene&!rpar; (PE) blend of different ratios. The effect of blend ratio on corrosion protection efficiency was investigated. The best results for corrosion control were achieved using samples with 2 mm thickness. The data obtained reveal that applying adhesive on the substrate increases the protective properties of the coatings. Copyright © 2006 John Wiley & Sons, Ltd.     

Recent advances of achiral and chiral diene ligands in transition-metal catalyses

A series of achiral and chiral diene and the related ligands in transition-metal complexes is evaluated by percent buried volume (%V_bur) based on their molecular structures by X-ray analysis. Steric bulk of cyclic diene ligands in [Ru(acac)₂L] and [RhClL]₂ are sorted in the order of %V_bur. Recent developments on transition-metal catalyses using these ligands such as (i) conjugate arylations, alkenylation, and alkynylation, (ii) imine-arylations and alkenylations, (iii) kinetic resolutions, (iv) allylation, (v) cyclizations, (vi) defluorinations, (vii) CH bond activations, and (viii) cross-dimerizations are reviewed.     

Chemical ageing effects on the mechanical behaviour of ethylene-propylene diene monomer

Ethylene-propylene diene monomer (EPDM) elastomer diaphragm failures due to material degradation pose a major risk in the biopharmaceutical industry, as they can result in long periods of production downtime. It is suspected that a key cause of this EPDM degradation is due to the chemical solutions used in equipment cleaning processes. However this has never been empirically investigated in the public domain. Twenty four virgin samples were utilised for testing, twelve of which were subject to common chemical cleaning solutions used in the biopharmaceutical sector. The chemical solutions under investigation were aqueous solutions of NaOH, NaClO, H₃PO₄, and the interaction between 100 °C H₂O and NaClO. The characterisation of the degradation process was conducted by mechanical testing. The results show that degradation of the polymer bulk proceeds predominantly via crosslinking for all exposure types. NaOH and H₃PO₄ exposure results in an accelerated rate of crosslinking compared to NaClO in the early stages of exposure.     

Synthesis of Poly(vitamin C) through ADMET

l ‐Ascorbic acid, commonly known as vitamin C and one of the most important biological compounds, is converted to a α,ω‐diene monomer and subsequently polymerized for the first time by acyclic diene metathesis. Various experimental conditions such as polymerization medium, catalyst type, temperature, and monomer/catalyst ratio are studied. The moderate molecular weight polymers are achieved when the polymerizations are conducted under bulk conditions employing the Grubbs first generation (G1) or Hoveyda–Grubbs second generation catalyst (HG‐2). In the solution case, on the other hand, low molecular weight polymers are obtained regardless of the catalyst type. Moreover, when the catalyst performances are compared, it is found that G1 produces the higher molecular weight as well as higher yield polymers with respect to the HG‐2.

     

β-Methallylrhodium(III) supported on a vanadium oxide cluster: Synthesis,structure, and reaction

Reaction of [(³-C₄H₇)₂Rh(CH₃CN)₂]PF₆(³-C₄H₇ = -methallyl) with [n-Bu₄N](VO₃) gives a new ³-allyl cluster [n-Bu₄N]₂[{(³-C₄H₇)₂Rh}₂ (V₄O₁₂)] (I) which is readily converted into a diene cluster, [n-Bu₄N]₂ [{(⁴-C₈H₁₄)Rh}₂(V₄O₁₂)] (II) (C₈H₁₄=2,5-dimethyl-1,5-hexadiene) by reacting with CO or P(OEt)₃;I andII have been characterized crystallographically.     

不饱和羧酸酯的分子内Diels-Alder反应的研究

本文合成(2E,4Z)-4,5-二苯基-2,4-戊二烯醇,并分别与丙烯酰氯及顺丁烯二酸酐反应生成对应的酯。研究了丙烯酸-(2E,4Z)-4,5-二苯基-2,4-戊二烯酯和顺丁烯二酸-(2E,4Z)-4,5-苯基-2,4-戊二烯单酯的分子内Diels-Alder反应,并证实这两种酯分子内环加成反应的活性有很大差异。通过NMR,IR,MS,UV等图谱分析,并运用分子轨道理论,探讨了该环加成反应的过程及其区域专一性和立体选择性。