The particle emitter size dependence on energy in ee annihilations into hadrons

The nearly energy independent hadron emitter dimension r, measured in e⁺e⁻ annihilation in the energy range 10 to 91 GeV via the Bose–Einstein correlation of two identical charged pions, is shown to be well accounted for by choosing the hadron jets as independent pion sources. To this end the known normalised factorial cumulant moments dependence on particle sources is adapted to the Bose–Einstein correlation formalism to yield a relation between r and these sources. This approach is also able to account for the measured r values obtained for the Z⁰ decays into two and three hadron jets. Finally the estimated r value of the hadronic (9.46) decay via three gluons is expected to be higher by about 6 to 11% over that predicted for its one photon hadronic decay mode.     

Analysis of a statistical multiplexer with generalized periodic sources

We provide solution techniques for the analysis of multiplexers with periodic arrival streams, which accurately account for the effects of active and idle periods and of gradual arrival. In the models considered in this paper, it is assumed that each source alternates (periodically) between active and idle periods of fixed durations. Incoming packets are transmitted on the network link and excess information is stored in the multiplexing buffer when the aggregate input rate exceeds the capacity of the link. We are interested in the probability distribution of the buffer content for a given network link speed as a function of the number of sources and their characteristics, i.e., rate and duration of idle and active periods. We derive this distribution from two models: discrete time and continuous time systems. Discrete time systems operate in a slotted fashion, with a slot defining the base unit for data generation and transmission. In particular, in each slot the link is capable of transmitting one data unit and conversely an active source generates one data unit in that time. The continuous time model of the paper falls in the category of fluid models. Compared to previous works we allow a more general model for the periodic packet arrival process of each source. In discrete time, this means that the active period of a source can now extend over several consecutive slots instead of a single slot as in previous models. In continuous time, packet arrivals are not required to be instantaneous, but rather the data generation process can now take place over the entire duration of the active period. In both cases, these generalizations allow us to account for the progressive arrival of source data as a function of both the source speed and the amount of data it generates in an active period.This work was done while at the IBM T.J. Watson Research Center.This work was done while at the IBM T.J. Watson Research Center.Part of the work was done while visiting the IBM T.J. Watson Research Center.     

First production of ultracold neutrons with a solid deuterium source at the pulsed reactor TRIGA Mainz⋆

The production rates of ultracold neutrons (UCN) with a solid deuterium converter have been measured at the pulsed reactor TRIGA Mainz. Exposed to a thermal neutron fluence of n·cm^-2·pulse^-1, the number of detected very cold and ultracold neutrons ranges up to 200 000 at 7mol of solid deuterium (sD₂) in combination with a pre-moderator (mesitylene). About 50% of the measured neutrons can be assigned to UCN with energies E of where V _F(sD ₂) = 105 neV and V _F(guide) = 190 neV are the Fermi potentials of the sD₂ converter and our stainless steel neutron guides, respectively. Thermal cycling of solid deuterium, which was frozen out from the gas phase, considerably improved the UCN yield, in particular at higher amounts of sD₂.     

Acoustic source terms study for non-isothermal flows using an aeroacoustic hybrid approach

This paper presents a numerical study of noise source term in non-isothermal flows in the context of an aeroacoustic hybrid technique at low Mach numbers. Asymptotic analysis applied to the fully compressible Navier–Stokes equations provides separated sets of equations for the dynamic of the flow and the production and propagation of acoustic waves. Comparisons with analytical dipole and quadrupole distributions are performed, confirming the dipole type of non-isothermal source distribution. This paper is a preliminary work for some more extensive studies on the topic. To cite this article: F. Golanski, C. Prax, C. R. Mecanique 333 (2005).     

�Ǿֲ��������������˥���ٶ�

In this paper, the asymptotic behavior of the weak solution (u_t)_{t\ge0} to the non-local Cauchy problems as stated in (1) is considered. Only using lower bounds of jumping kernel J(x,y) for large |x-y|, it is obtained that \|u_t\|_p\le c(t)\|u_0\|_q with any 1\le q相似文献   

具有非线性范数型源的反应扩散方程组解的爆破性质

本文研究了一类带有非线性范数型源的反应扩散方程组u_t=?u~m+a‖u~(p1)v~(q1)‖_α~(r1),v_t=?v~n+b‖v~(p2)w~(q2)‖_β~(r2),w_t=?w~h+c‖w~(p3)u~(q3)‖_γ~(r3)在齐次Dirichlet边界条件下解的爆破问题.利用上下解方法和构造辅助函数的技巧,得到了方程组解的整体存在与爆破的准则,将当前的一些研究结果推广到更复杂的情形.     

Analytical model for thermal resistance due to multiple moving circular contacts on a coated bodyModèle analytique pour la résistance thermique due à des contacts circulaires mobiles multiples à la surface d'un solide revêtu

The heat transfer at the interface of two solids in sliding/rolling contact depends on the constriction phenomenon which occurs at the vicinity of asperities. In order to study this problem, the micro-contacts are represented by multiple moving circular heat sources on the surface of a body. The studied body is constituted of a substrate and a surface coating. The thermal constriction resistance due to those contacts is determined analytically in this paper. The solution is developed by using the integral Fourier transforms, and it is valid regardless of the velocity and the relative contact size values. To cite this article: A. Baïri, C. R. Mecanique 331 (2003).     

Analysis of Unsteady Motion with Respect to Noise Sources in a Gas Turbine Combustor: Isothermal Flow Case

In order to evaluate the direct and indirect contributions to the total combustion noise emission, a combustion chamber consisting of a swirl burner and an exit nozzle of Laval-shape, representing a gas turbine combustor, is investigated by means of experiments and large eddy simulation. Focused on the isothermal flow case first and encouraged by a good overall agreement between the LES and the experimental data for the flow field, a first characterisation of the flow with respect to noise sources is performed. To analyse acoustic properties of the flow, time and length scales are evaluated inside the combustor. Furthermore, the evidence for the existence of a precessing vortex core (PVC), typical for configurations with swirl, is revealed. Finally, the effect of the PVC on the flow inside the Laval nozzle is discussed.     

The scattering of harmonic elastic anti-plane shear waves by two collinear cracks in the piezoelectric plate by using the non-local theory

In this paper, the dynamic interaction between two collinear cracks in a piezoelectric material plate under anti-plane shear waves is investigated by using the non-local theory for impermeable crack surface conditions. By using the Fourier transform, the problem can be solved with the help of two pairs of triple integral equations. These equations are solved using the Schmidt method. This method is more reasonable and more appropriate. Unlike the classical elasticity solution, it is found that no stress and electric displacement singularity is present at the crack tip. The non-local dynamic elastic solutions yield a finite hoop stress at the crack tip, thus allowing for a fracture criterion based on the maximum dynamic stress hypothesis. The project supported by the Natural Science Foundation of Heilongjiang Province and the National Natural Science Foundation of China(10172030, 50232030)     

红外无损探测中多宗量多热源反演问题的研究

为研究红外无损探测稳态多热源反演逆问题, 建立不同形状的均质与非均质稳态热传导模型, 其中内热源个数、位置、强度、面积均为未知项. 基于数值算法中有限元算法对模型进行离散分析, 化简有限元矩阵方程, 最终转化为对Ax = b高度欠定方程的求解. 首次利用分段多项式谱截断奇异值分解法处理内热源逆问题, 并对算法进行改进, 有效改善了该算法在处理多热源反演时存在的严重的热源叠加效应. 根据反演出的内热源信息, 利用有限元算法计算重构出整个模型内所有节点的温度分布. 运用数值仿真Comsol软件和具体实物实验对算法进行有效性评估, 并验证算法在不同热传导模型中的表现. 结果表明, 算法能够准确反演出多热源各参量信息, 在非均质材料模型中仍能准确地反演出热源项, 并有效重构出模型内温度场. 该算法可应用于材料无损检测及人体红外医学成像等领域.