Aerobic Double Dehydrogenative Cross Coupling between Cyclic Saturated Ketones and Simple Arenes

The synthesis of 3‐aryl‐2‐cyclohexenones is a topic of current interest as they are not only privileged structures in bioactive molecules, but they are also relevant feedstocks for the synthesis of substituted phenols or anilines, which are ubiquitous structural elements both in drug design and medicinal chemistry. A simple and sustainable one‐pot aerobic double dehydrogenative reaction under mild conditions for the introduction of arenes in the β‐position of cyclic ketones has been developed. Starting from the corresponding saturated ketone, this reaction sequence proceeds under relatively low Pd catalyst loading and involves catalytic amounts of electron‐transfer mediators (ETMs) under ambient oxygen pressure.     

Multicomponent,Flow Diazotization/Mizoroki–Heck Coupling Protocol: Dispelling Myths about Working with Diazonium Salts

A single pass flow diazotization/Mizoroki–Heck protocol has been developed for the production of cinnimoyl and styryl products. The factors that govern aryl diazonium salt stability have been examined in detail leading to the development of a MeOH/DMF co‐solvent system in which the diazonium salts can be generated in the presence of all other reaction components and then coupled selectively to give the desired products. Finally the key role of the reaction quench for flow reactions has been demonstrated.     

Synthesis of Single‐Crystalline Spinel LiMn2O4 Nanorods for Lithium‐Ion Batteries with High Rate Capability and Long Cycle Life

The long‐standing challenge associated with capacity fading of spinel LiMn₂O₄ cathode material for lithium‐ion batteries is investigated. Single‐crystalline spinel LiMn₂O₄ nanorods were successfully synthesized by a template‐engaged method. Porous Mn₃O₄ nanorods were used as self‐sacrificial templates, into which LiOH was infiltrated by a vacuum‐assisted impregnation route. When used as cathode materials for lithium‐ion batteries, the spinel LiMn₂O₄ nanorods exhibited superior long cycle life owing to the one‐dimensional nanorod structure, single‐crystallinity, and Li‐rich effect. LiMn₂O₄ nanorods retained 95.6 % of the initial capacity after 1000 cycles at 3C rate. In particular, the nanorod morphology of the spinel LiMn₂O₄ was well‐preserved after a long‐term cycling, suggesting the ultrahigh structural stability of the single crystalline spinel LiMn₂O₄ nanorods. This result shows the promising applications of single‐crystalline spinel LiMn₂O₄ nanorods as cathode materials for lithium‐ion batteries with high rate capability and long cycle life.     

Manganese‐Catalyzed Dehydrogenative [4+2] Annulation of N?H Imines and Alkynes by C?H/N?H Activation

Described herein is a manganese‐catalyzed dehydrogenative [4+2] annulation of N H imines and alkynes, a reaction providing highly atom‐economical access to diverse isoquinolines. This transformation represents the first example of manganese‐catalyzed C H activation of imines; the stoichiometric variant of the cyclomanganation was reported in 1971. The redox neutral reaction produces H₂ as the major byproduct and eliminates the need for any oxidants, external ligands, or additives, thus standing out from known isoquinoline synthesis by transition‐metal‐catalyzed C H activation. Mechanistic studies revealed the five‐membered manganacycle and manganese hydride species as key reaction intermediates in the catalytic cycle.     

Synthesis and Insecticidal Evaluation of Novel Phthalic Diamides Containing 1,2,3‐Triazoles via Click Reaction

A series of novel phthalic diamide derivatives containing 1,2,3‐triazole moiety were synthesized using one‐pot click chemistry approach and characterized by ¹H NMR and HRMS. The insecticidal activity against armyworm (Mythimna separata), Tetranychu scinnabarinus and cowpea aphid (Aphis craccivora) was evaluated. Compounds 4II‐a and 4II‐i showed 50% insecticidal activity against armyworm (Mythimna separata) at the concentration of 4 mg/L and one‐third of the compounds had moderate activity against Tetranychus cinnabarinus at 500 mg/L.     

Compressive advection and multi‐component methods for interface‐capturing

This paper develops methods for interface‐capturing in multiphase flows. The main novelties of these methods are as follows: (a) multi‐component modelling that embeds interface structures into the continuity equation; (b) a new family of triangle/tetrahedron finite elements, in particular, the P₁DG‐P₂(linear discontinuous between elements velocity and quadratic continuous pressure); (c) an interface‐capturing scheme based on compressive control volume advection methods and high‐order finite element interpolation methods; (d) a time stepping method that allows use of relatively large time step sizes; and (e) application of anisotropic mesh adaptivity to focus the numerical resolution around the interfaces and other areas of important dynamics. This modelling approach is applied to a series of pure advection problems with interfaces as well as to the simulation of the standard computational fluid dynamics benchmark test cases of a collapsing water column under gravitational forces (in two and three dimensions) and sloshing water in a tank. Two more test cases are undertaken in order to demonstrate the many‐material and compressibility modelling capabilities of the approach. Numerical simulations are performed on coarse unstructured meshes to demonstrate the potential of the methods described here to capture complex dynamics in multiphase flows. Copyright © 2015 John Wiley & Sons, Ltd.     

反相液相色谱中溶质保留参数间的定量关系研究

 比较了Snyder经验公式中的K0w 与S和溶质计量置换保留模型 (SDM R)中溶质保留参数Z(1mol溶剂化溶质被溶剂化固定相吸附时 ,在其接触表面处释放出溶剂或置换剂的总摩尔数 )与lgI(与 1mol溶质对固定相的亲和势有关的常数 )之间的定量关系。SDM R中的两个参数间不仅对同系物溶质可以有很好的线性关系 ,而且对非同系物溶质也有很好的线性关系。其线性关系的好坏主要取决于这两个参数数值范围的大小 ,与文献中报告的线性关系取决于是否单因素影响溶质的保留和完全由统计学规律决定的结论不同。     

高效液相色谱法测定油田水中的非离子表面活性剂

提出了一种用高效液相色谱法测定油田水中聚氧乙烯辛基苯酚醚－10（OP－10）总量的方法,讨论了固定相和流动相体系的选择、操作参数的优化、共存物对测定的干扰。测定了模拟油田水样品。     

Surface treatment of ultra‐high molecular weight polyethylene fibers using potassium permanganate and mechanical properties of its composites

Potassium permanganate was applied to improve the surface properties of the ultra‐high molecular weight polyethylene (UHMWPE) fibers. The results suggested that the surface oxygen atoms increased dramatically and the O/C ratio increased from 0.030 to 0.563 after treatment. The increased surface roughness and the O‐containing groups on the treated fiber surface decreased the contact angles with water and ethylene glycol. The crystallinity and the crystallite size of the treated fibers increased, and the DSC results indicated that chain scission and the formation of ―C═O chemical defects in the amorphous region were the main mechanisms of the deterioration of the treated UHMEPE fibers. The breaking strength and the elongation at break of the fibers decreased, but the modulus increased after treatment. The treated fibers exhibited better adhesion with epoxy matrix. An improvement of 27.6% from 101.4 to 129.4 MPa in ILSS confirmed the improvement in the interfacial adhesion strength of composites. The impact and bending strength of composites were both improved.     

One‐step electrochemical deposition to achieve superhydrophobic cobalt incorporated amorphous carbon‐based film with self‐cleaning and anti‐corrosion

Exploiting a superhydrophobic surface is very significant due to its excellent water repellency which has many practical applications in various fields. In this work, the cobalt incorporated amorphous carbon‐based (Co/a‐C:H) film was prepared successfully on Si substrate via a simple 1‐step electrochemical deposition where electrochemical deposition technology was using cobalt (II) acetylacetonate methanol solution as electrolyte under high voltage, atmospheric pressure, and low temperature. Surprisingly, the as‐prepared film showed a superior superhydrophobic surface with a water contact angle of 153 ± 1° and a sliding angle of 7.6° without any further modification of low surface energy materials. Especially, the tape adhesive, corrosion resistance, and self‐cleaning tests demonstrated that the as‐prepared carbon‐based film could possess fairly well adhesion, superior anti‐corrosion resistance, and self‐cleaning ability, respectively. It indicated that the superhydrophobic Co/a‐C:H film might have potential promising applications in the field of anti‐fouling, anti‐corrosion, and drag resistance, such as the above‐deck structures on icebreaker vessels, ship hulls, and offshore wind turbine blades.